Asus BG248 Series LCD Monitor User Guide

ASUS BG248 Series LCD Monitor

Safety information

• Before setting up the monitor, carefully read all the documentation that came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or moisture.
• Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• Do not overload power strips and extention cords. Overloading can result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges.
• Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100- 240V AC.
• If you encounter technical problems with the monitor, contact a qualified service technician or your retailer.
• Adjustment of the volume control as well as the equalizer to other settings than the center position may increase the ear-/headphones output voltage and therefore the sound pressure level.

This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Please check local regulations for disposal of electronic products.

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the monitor. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• The screen may flicker during the initial use due to the nature of the fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.
• You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself!

Conventions used in this guide

WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.

Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling information in different region.

Product introduction

Welcome!

Thank you for purchasing the ASUS® LCD monitor!
The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you!

Package contents

Check your package for the following items:

• LCD monitor
• Monitor base
• Quick start guide
• Warranty card
• Power cord
• DVI (Dual-Link) cable
• Audio cable

If any of the above items is damaged or missing, contact your retailer immediately.

Monitor introduction

Front view

1. Mode button:
   • Selects a desired preset mode.
   • Exits the OSD menu or goes back to the previous menu when the OSD menu is active.
2. Selection button:
   • Decreases values or moves your selection left/down.
   • GamePlus hotkey. Press to select and MENU to confirm the function needed.
3. MENU button:
   • Turns on the OSD menu. Enacts the selected OSD menu item.
4. Adjustment button:
   • Increases values or moves your selection right/up.
   • Brightness hotkey
5. Source button:
   • Selects an available input source.
6. Power button/power indicator
   • Turns the monitor on/off.
   • The color definition of the power indicator is as the below table.

Back view

Rear connectors

1. AC-IN port. This port connects the power cord.
2. Displayport. This port is for connection for a DisplayPort compatible device.
3. DVI (Dual-Link) port. This 24-pin port is for PC (Personal Computer) DVI-digital signal connection.
4. HDMI port. This port is for connection with an HDMI compatible device.
5. Audio-in port. This port connects PC audio source by the bundled audio cable.
6. Earphone jack. This port is only available when an HDMI/DisplayPort cable is connected.

GamePlus Function

The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. In addition, Aimpoint function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games.
To active GamePlus:

1. Press the GamePlus hotkey.
2. Press Button to select between Aimpoint and Timer function.
3. Press MENU to confirm the function you choose, and to go back, off, and exit.

Assembly

Assembling the monitor arm/base

To assemble the monitor base:

1. Have the front of the monitor face down on a table.
2. Rotate the arm anti-clockwise 90 degrees. (Figure 1)
3. Fix the base to the arm by fastening the bundled screw. (Figure 2) (Figure 3)
4. Align the arrow mark on the base with the two screws to allow 90 degrees swivel from either left or right.

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

Adjusting the monitor

• For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• The recommended adjusting angle is +15˚ to -5˚ (for tilt)/+45˚ to -45˚ (for swiveling/ +110 mm (for height adjustment)/90˚ (for portrait view).

It is normal that the monitor slightly shakes while you adjust the viewing angle.

Detaching the arm (for VESA wall mount)

The detachable arm of this monitor is specially designed for VESA wall mount.
To detach the arm:

1. Have the front of the monitor face down on a table.
2. Loosen the four screws on the back of the monitor and remove the arm/base.

Connecting the cables

Connect the cables as the following instructions:

• To connect the power cord: connect one end of the power cord securely to the monitor’s AC input, the other end to a power outlet.
• To connect the DVI/HDMI/DisplayPort cable:
  a. Plug one end of the DVI/HDMI/DisplayPort cable to the monitor’s DVI/HDMI/DisplayPort port.
  b. Connect the other end of the DVI/HDMI/DisplayPort cable to your computer’s DVI/HDMI/DisplayPort port.
  c. Tighten the two screws to secure the DVI connector.
• To connect the audio cable: connect one end of the audio cable to the monitor’s Audio-in port, the other end to the computer’s audio-out port.
• To use the earphone.(only when an HDMI/DisplayPort cable is connected): connect the end with plug type to the monitor’s earphone jack.

Note: When these cables are connected, you can choose the desired signal from the Input Select item in the OSD menu.

Turning on the monitor

Press the power button . See page 1-2 for the location of the power button. The power indicator lights up in blue to show that the monitor is ON.

OSD (On-Screen Display) menu

How to reconfigure

1. Press the MENU button to activate the OSD menu.
2. Press and to navigate through the functions. Highlight the desired function and press the MENU button to activate it. If the function selected has a sub-menu, press and again to navigate through the sub-menu functions. Highlight the desired sub-menu function and press the MENU button to activate it.
3. To exit and save the OSD menu, press the button repeatedly until the OSD menu disappears. To adjust other functions, repeat steps 1-3.

OSD Function Introduction

1. Splendid
   This function contains six sub-functions you can select for your preference. Each mode has the Reset selection allowing you to maintain your setting or return to the preset mode.
   • Scenery Mode: best choice for scenery photo display with SPLENDID™ Video Enhancement.
   • Standard Mode: best choice for document editing with SPLENDID™ Video Enhancement.
   • Theater Mode: best choice for movies with SPLENDID™ Video Enhancement.
   • Game Mode: best choice for games playing with SPLENDID™ Video Enhancement.
   • Night View Mode: best choice for dark-scene games or movies with SPLENDID™ Video Enhancement.
   • sRGB: best choice for viewing photos and graphics from PCs.
2. Blue Light Filter.
   In this function, you can adjust the blue light filter level.
   • Level 0: No change.
   • Level 1~4: The higher the level, the less blue light is scattered. When Blue Light Filter is activated, the default  settings of Standard Mode will be automatically imported. Between Level 1 to Level 3, the Brightness function is user-configurable. Level 4 is optimized setting. It is compliance with TUV Low Blue Light Certification. The Brightness function is not user configurable.
   • Users should take some time away from the display if working for long hours. It is advised to take short breaks (at least 5 mins) after around 1 hour of continuous working at the computer. Taking short and frequent breaks is more effective than a single longer break.
   • To minimize eye strain and dryness in your eyes, users should rest the eye periodically by focusing on objects that are far away.
   • Eye exercises can help to reduces eye strain. Repeat these exercises often. If eye strain continues please consult a physician. Eye exercises: (1) Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.
   • High energy blue light may lead to eye strain and AMD (Age-Related Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue light to avoiding CVS (Computer Vision Syndrome).
3. Color.
   You can adjust Brightness, Contrast, Saturation, Color Temp., Skin Tone, and Smart View from this menu.
   • Brightness: the adjusting range is from 0 to 100. is a hotkey to activate this function.
   • Contrast: the adjusting range is from 0 to 100.
   • Saturation: the adjusting range is from 0 to 100.
   • Color Temp.: contains four modes including Cool, Normal, Warm, and User Mode.
   • Skin Tone: contains three color modes including Reddish, Natural, and Yellowish.
   • Smart View: provides better display quality under big viewing angle.
4. Image
   You can adjust Sharpness, Trace Free, Aspect Control and ASCR, from this menu.
   • Sharpness: the adjusting range is from 0 to 100.
   • Trace Free: adjusts the response time of the monitor.
   • Aspect Control: adjusts the aspect ratio to full, 4:3, or OverScan.
     4:3 is only available when input source is in 4:3 format. OverScan is only available for the HDMI input source.
   • ASCR: turns on or off the ASCR (ASUS Smart Contrast Ratio) function.(Only available at Scenery Mode, Theater Mode, Game Mode, and Night View Mode.)
5. Input Select.
   In this function, you can select your desired input source.
6. System Setup.
   Allows you to adjust the system.
   • Splendid Demo Mode: splits the screen into two for Splendid modes comparison.
   • Volume: the adjusting range is from 0 to 100.
   • ECO Mode: reduces power consumption.
   • OSD Setup:
     • Adjusts the horizontal position (H-Position)/the vertical position (V-Position) of the OSD from 0 to 100.
     • Adjusts the OSD timeout from 10 to 120 seconds.
     • Enables or disables the DDC/CI function.
     • Adjusts the OSD background from opaque to transparent.
   • Information: shows the monitor information.
   • Language: there are 21 languages for your selection, including English, French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian.
   • All Reset: “Yes” allows you to restore the default settings.

Specifications summary

*Specifications are subject to change without notice.

Troubleshooting (FAQ)

Supported operating modes