LG LED TV Owner’s Manual

OWNER’S MANUAL
Safety and Reference
LED TV*

* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
32LM500BPUA
43LM5000PUA
28LM400B-PU
28LM430B-PU
28TL430D-PU

Important Safety Instruction

•  Read these instructions.
•  Keep these instructions.
•  Heed all warnings.
•  Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
•  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A   grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided  plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the  apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use  caution when moving the cart/apparatus combination to avoid injury from tip-over
  
•  Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply  cord or plug is  damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,  does not operate normally, or has been dropped.
  By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not   limited to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis. The terms of the arbitration  agreement (including details on the procedure for resolving disputes) are available at www.lg.com/us/arbitration (USA) or www.lg.ca/arbitration  (Canada).

Warning! Safety Instructions

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of  uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk  of electric shock to persons.
This symbol is intended to alert the user to the presence of  important operating and maintenance (servicing)  instructions in the literature accompanying the device.
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

•  TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
•  Do not place the TV and/or remote control in the following environments:
  – Keep the product away from direct sunlight.
  – An area with high humidity such as a bathroom
  – Near any heat source such as stoves and other devices that  produce heat.
  – Near kitchen counters or humidifiers where they can easily be  exposed to steam or oil.
  – An area exposed to rain or wind.
  – Do not expose to dripping or splashing and do not place objects  filled with liquids, such as vases, cups, etc. on or over the  apparatus (e.g., on shelves above  the unit).
  – Near flammable objects such as gasoline or candles, or expose  the TV to direct air conditioning.
  – Do not install in excessively dusty places. Otherwise, this may result in fire, electric shock, combustion/ explosion, malfunction or product deformation.
• Ventilation
   - Install your TV where there is proper ventilation. Do not install in  a confined space such as a bookcase.
  – Do not install the product on a carpet or cushion.
  – Do not block or cover the product with cloth or other materials  while the unit is plugged in.
• Take care not to touch the ventilation openings. When watching  TV for a long period, the ventilation openings may become hot.
• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where  the cord exits the device.
• Do not move the TV whilst the Power cord is plugged in.
• Do not use a damaged or loosely fitting power cord.
• Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
• Do not connect too many devices to the same AC power outlet as  this could result in fire or electric shock.
• Disconnecting the Device from the Main Power
  – The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.
• Do not let your children climb or cling to the TV. Otherwise, the TV may fall over, which may cause serious injury.
• Outdoor Antenna Grounding (Can differ by country)
  – If an outdoor antenna is installed, follow the precautions below.  n outdoor antenna system should not be located in the vicinity of overhead power lines or  their  electric light or power circuits,  or where it can come in contact with such power lines or circuits  as death or serious injury can occur.
  Be sure the antenna  system is grounded to provide some  protection against voltage surges and built-up static charges.   Section 810 of the National Electrical Code (NEC) in the  . S.A.  provides information with respect to proper grounding of the  mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of  grounding conductors,  location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.  Antenna grounding  according to the National Electrical Code,  ANSI/NFPA 70
• Grounding (Except for devices that are not grounded.)
  – TV with a three-prong grounded AC plug must be connected to  a three-prong grounded AC outlet. Ensure that you connect the  earth ground wire to prevent possible electric shock.
•  Never touch this apparatus or antenna during a lightning storm. You may be electrocuted.
• Make sure the power cord is connected securely to the TV and wall socket , if not secured damage to the Plug and socket, may occur and in extreme cases, a fire may break out.
• Do not insert metallic or inflammable objects into the product. If a foreign object is dropped into the product, unplug the power cord and contact  customer service.
• Do not touch the end of the power cord while it is plugged in. You may be electrocuted.
• If any of the following occur, unplug the product immediately and contact your local customer service.
  – The product has been damaged.
  – If water or another substance enters the product (like an AC  adapter, power cord or TV).
  – If you smell smoke or other odors coming from the TV
  – When lightning storms or when unused for long periods of time. Even the TV is turned off by remote control or button, AC power source is connected to the unit if not unplugged in.
• Do not use high voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction.
• Do not attempt to modify this product in any way without written authorization from LG Electronics. Accidental fire or electric shock  can occur. Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product.
• Use only an authorized attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.
• Never disassemble the AC adapter or power cord. This may result in fire or electric shock.
• Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter.
• To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe dust off
• .Batteries
  – Store the accessories (battery, etc.) in a safe location out of the reach of children.
  – Do not short circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.
• Moving
  – When moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people  to carry larger TVs. Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard or injury.
• Keep the packing anti-moisture material or vinyl packing out of the reach of children.
•  Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.
• Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it. It may cause damage to screen.
• Cleaning
  – When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can
  damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

Preparing

• When the TV is turned on for the first time after being shipped from the factory, the initialization of the TV may take approximately one minute.
•  The image shown may differ from your TV.
•  Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
• The available menus and options may differ from the input source or product model that you are using.
• New features may be added to this TV in the future.
• The device must be easily accessed to a location outlet near the access. Some devices are not made by turning the on / off button, turning off the device , and unplugging the power cord.
• The items supplied with your product may vary depending upon the model.
• Product specifications or contents of this manual may be changed without prior notice due to the upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) wide.
• Use an extension cable that supports USB 2.0 if the USB cable or USB flash drive does not fit into your TV’s USB port.
• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
• Recommended HDMI cable types, (3 m (9.84 feet) or less).  - Ultra High-Speed HDMI®/TM cable

 

*A <= 10 mm (0.39 inches)
*B <= 18 mm (0.7 inches)

Optional Extras

Optional extras can be changed or modified for quality improvement  without any notification. Contact your dealer for buying these items. These devices work only with certain models.
The model name or design may be changed due to the manufacturer’s  circumstances or policies.

Wall Mounting Bracket

(Depending upon model)
Make sure to use screws and a wall mount bracket that meet the VESA  standard. Standard dimensions for the wall mount kits are described in  the following table.

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV  from being scratched or damaged and for safe transportation regardless  of its type and size.

•  It is recommended to move the TV in the box or packing material that the TV originally came in.
•  Before moving or lifting the TV, disconnect the power cord and all cables.
•  When holding the TV, the screen should face away from you to avoid damage.
  
• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.
  
• Use at least two people to move a large TV.
• When transporting the TV by hand, hold the TV as shown in the following illustration.
  
• When transporting the TV, do not expose the TV to jolts or excessive vibration.
• When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.
• When handling the TV, be careful not to damage the protruding buttons.
• Avoid touching the screen at all times, as this may result in damage to the screen.
• Do not place the product on the floor with its front-facing down without padding. Failure to do so may result in damage to the screen.
•  When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

Mounting on the Table

1. Lift and tilt the TV into its upright position on a table.
   •  Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.
2. Connect the power cord to a wall outlet.
   •  Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)
   •  If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause njury.
   •  Do not use any unapproved items to ensure the safety and product life span.
   •  Any damage or injuries caused by using unapproved items are not covered by the warranty.
   •  Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
   •  Do not fasten the screws with excessive force otherwise they may be worn out and become loose.

Securing TV to the Wall

1. Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
   •  If there are bolts inserted at the eye-bolts position, remove the bolts first.
2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.
3. Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.
   •  Use a platform or cabinet that is strong and large enough to support the TV securely.
   •  Brackets, bolts , and ropes are not provided. You can obtain additional accessories from your local dealer.

Mounting to the Wall

An optional wall mount can be used with your LG Television. Consult  with your local dealer for a wall mount that supports the VESA  standard used by your TV  model. Carefully attach the wall mount  bracket at the rear of the TV. Install the wall mount bracket on a solid  wall perpendicular to the floor. If you are attaching the  TV to other  building materials, please contact qualified personnel to install the  wall mount. Detailed instructions will be included with the wall mount.  We recommend  that you use an LG brand wall mount. The LG wall  mount is easy to adjust or to connect the cables. When you do not use   s wall mount bracket, use a wall mount  packet where the device is  adequately secured to the wall with enough space to allow connectivity  to external devices. If you are using a non-adjustable mount, attache the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
•  For more information of screws and wall mount brackets, refer to the Separate purchase.
• If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
• When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.
• The screw length from the outer surface of the back cover should be under 8 mm (0.31 inches). (For 28LM40*, 28LM43*, 28TL43*)

Connections

You can connect various external devices to the TV. For more
information on external device’s connection, refer to the manual
provided with each device.

Antenna/Cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional.

• Make sure not to bend the copper wire of the RF cable.
  
• Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.
• Use a signal splitter to use 2 TVs or more.
• DTV Audio Supported Codec: MPEG, Dolby Digital, HE-AAC

Other connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable.

HDMI

•  HDMI Audio Supported Format: (Depending upon model)
  AC3 (32 kHz / 44.1 kHz / 48 kHz),
  PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz)

External Devices

Supported external devices are Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices,  and other external devices.  For more information on the external device’s connection, refer to the manual provided with each device.

•  If you record a TV program on a Blu-ray/DVD recorder or VCR, make  sure to connect the TV signal input cable to the TV through a DVD  recorder or VCR.  For more information about recording, refer to the  manual provided with the connected device.
• The external device connections shown may differ slightly from illustrations in a manual.
• Connect external devices to the TV regardless of the order of the TV port.
• If you connect a gaming device to the TV, use the cable supplied with the gaming device.
• Refer to the external equipment’s manual for operating instructions.
• In PC mode, there may be noise associated with the resolution,  vertical pattern, contrast or brightness. If noise is present, change  the PC output to another  resolution, change the refresh rate to another rate or adjust the brightness and contrast on the [Picture] menu until the picture is clear.

Using Button

You can simply operate the TV functions, using the button.

Basic functions

Using Remote Control

(Depending upon model)
The descriptions in this manual are based on the buttons on the remote  control. Please read this manual carefully and use the TV correctly.
To install batteries, open the battery cover, replace batteries (1.5 V AAA)  matching the   and   ends to the label inside the compartment,  and close the battery cover.  o remove the batteries, perform the  installation actions in reverse. This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s  remote sensor.
Make sure to point the remote control toward the remote control sensor on the TV.

(Some buttons and services may not be provided depending upon models or regions.)

(POWER)  Turns the TV on or off.
  Returns to the last TV channel.CC/SUB  Activates or deactivates the subtitles.

Resizes an image.
Shows information on the current program.
 (Input)  Changes the input source.
Number buttons  Enter numbers.
(Dash)  Inserts a dash between numbers such as 2-1 and 2-2.
 LISTAccesses the saved channel list.
Q>VIEW Alternates between the two last channels selected (pressing repeatedly).
Adjusts the volume level.
Accesses your favorite channel list.
Displays the program event according to time scheduler.(Depending upon model)
(MUTE)  Mutes all sounds.
Scroll through the saved channels.
Moves to the previous or next screen.
Changes the picture mode.
(Home)  Accesses the Home menu.
SOUND Changes the sound mode.
(Settings)  Accesses the Settings menu.
Q.MENU Accesses the quick menu.
Navigation buttons (up/down/left/right)  Scrolls through menus or options.
(OK) Selects menus or options and confirms your input.
BACK Returns to the previous screen.
EXIT Clears all on-screen displays and returns to TV viewing.
Enables SAP (Secondary Audio Program) Feature. (Depending upon model)
Starts to record. (Only Time Machine Ready supported model) (Depending upon model)
Control buttons for media contents
 These access special functions in some menus.

• Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.
• Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution.
•  This apparatus uses batteries. In your community, there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.
• Batteries inside or inside the product shall not be exposed to excessive heat such as sunshine, fire or the like.

Settings

To select Picture Mode
(Settings) → [Picture] → [Picture Mode Settings] → [Picture Mode] Select the picture mode optimized for the viewing environment or the program.

•  [Vivid]: Heightens contrast, brightness, and sharpness to display vivid images.
  [Standard]: Displays images in standard levels of contrast, brightness and sharpness.
• [Cinema] / [Game]: Displays the optimum picture for movie or game.
• [Sports]: Optimised picture mode for football matches. The pitch and kits are presented in vibrant colors, with crystal-clear images even for fast movements.
•  Depending upon the input signal, the available range of picture modes may differ.

Setting the Picture Mode 

(Settings) → [Picture] → [Picture Mode Settings] This feature allows you to adjust the selected picture mode in detail.

• [Backlight]: Controls the level of screen brightness by adjusting the backlight. The closer to 100, the brighter the screen. Decrease the Backlight to reduce energy consumption.
• [Contrast]: Adjusts the contrast of the bright and dark areas of the picture. The closer to 100, the higher the contrast.
• [Brightness]: Adjusts the overall screen brightness. The closer to 100, the brighter the screen.
• [Sharpness]: Adjusts the sharpness of the image. The closer to 50, the sharper and clearer the image.
• [Color]: Tones down or up the colors displayed on the screen. The closer to 100, the deeper the color.
• Tint]: Adjusts the color balance between red and green displayed on the screen. The closer to Red 50, the more red the color will be. The closer to Green 50, the more green the color will be.
• [Color Temperature]: Adjusts the overall tone of the screen as desired. In Expert mode, detailed fine-tuning can be set via Gamma method, etc.
• The settings you specify only applies to the currently selected input mode. To apply your current picture settings to all input modes, select [Apply to all inputs].
• Depending upon input signal or other picture settings, the range of detailed items for adjustment may differ.

To set expert control
(Settings) → [Picture] → [Picture Mode Settings] → [Expert Controls]
For each picture mode, the screen can be calibrated; or for a special screen, picture settings can be adjusted. Select the desired [Picture  Mode].

• [Dynamic Contrast]: Adjusts the contrast to the optimal level according to the image’s brightness.
• [Dynamic Color]: Adjusts colors to make the image appear in more natural colors.
•  [Gamma]: Sets the gradation curve according to the output of picture signal in relation to the input signal.
•  Depending upon input signal or other picture settings, the range of detailed items for adjustment may differ.

To set additional picture options
(Settings) → [Picture] → [Picture Mode Settings] → [Picture Options]
Adjusts detailed setting for images.

• [Noise Reduction]: Eliminates noise in the picture.
• [MPEG Noise Reduction]: Eliminates noise generated while creating digital picture signals.
•  [Black Level]: Adjusts the brightness and contrast of the screen to suit the black level.
•  [Real Cinema]: Optimizes the screen for movie viewing.
• Depending upon input signal or other picture settings, the range of detailed items for adjustment may differ.

Initializing picture settings
(Settings) → [Picture] → [Picture Mode Settings] → [Picture Reset]
Initializes picture settings that the user customizes. Each picture mode is reset. Select the desired picture mode to reset.

Setting the Screen Size
(Settings) → [Picture] → [Aspect Ratio]Selects the screen aspect ratio.

•  [16:9]: Displays an aspect ratio of [16:9].
•  [Original]: Changes the aspect ratio to [4:3] or [16:9] depending upon the input video signal.
• [4:3]: Displays an aspect ratio of [4:3].
• [Zoom]: Resizes the image to fit the screen width. The top and bottom parts of the image may be cut off.
• [Just Scan]: Displays video images in the original size without removing parts of the edge of the image. (This function works in DTV/Component/HDMI (720p / 1080i / 1080p) Mode.)
  – If you select [Just Scan], you may see image noises at the edge of the original signal.
• Viewing content from an external device or, for an extended period of time, having fixed text such as the program name or using an aspect ratio of [4:3] may result in image sticking.
• Available picture size may differ depending upon the input signal.

To use Energy Saving Feature
(Settings) → [Picture] → [Energy Saving]
Reduces power consumption by adjusting peak screen brightness.

•  [Off]: Turns off the Energy Saving.
• [Minimum] / [Medium] / [Maximum]: Applies the pre-set Energy Saving.
• [Screen Off]: Screen is turned off and only sound is played. Press any button on the remote control to turn the screen back on.

To use picture test
(Settings) → [Picture] → [Picture Test]
Conducts Picture Test first to verify that image signal output is normal. When the test image is normal, check connected external devices or broadcast signal.
Selecting Sound Mode
(Settings) → [Sound] → [Sound Mode Settings] → [Sound Mode]
Adjusts TV audio to an optimal level based on a selected sound mode.

•  [Standard]: Optimizes the sound for all types of content.
• [Cinema]: Optimizes the sound for cinemas.
• [Sports]: Optimizes the sound for sports.
• [Music]: Optimizes the sound for music.
• [Game]: Optimizes the sound for gameplay.

To adjust audio balance
Settings) → [Sound] → [Sound Mode Settings] → [Balance]
Adjust the volume of the left and right speakers.
Using the Sound Effect function
(Settings) → [Sound] → [Sound Mode Settings]
The user can select various sound effects.

• [Treble]: Controls the dominant sounds in the output. When you turn up the treble, it will increase the output to the higher frequency range.
• [Bass]: Controls the softer sounds in the output. When you turn up he bass, it will increase the output to the lower frequency range.
• [Reset]: Reset the sound effect settings.
• This is only available if [Sound Mode] is set to [Standard].

To set Auto Volume
(Settings) → [Sound] → [Auto Volume]
Sets [Auto Volume] to [On] and volume output from channel to channel  is automatically adjusted for convenient TV watching when clicking through different hannels.
Playing audio through the TV’s internal speakers
(Settings) → [Sound] → [Sound Out] → [Internal TV Speaker]
Audio is played through the TV’s internal speakers.
Connecting and Using an Audio Device Supporting Optical
(Settings) → [Sound] → [Sound Out] → [Audio Out (Optical)]
You can connect an audio device that supports Optical to the optical digital audio output port to enjoy your TV’s sound in richer quality and greater convenience.

• Only available for models with an optical digital port.
• You can use the TV remote control to adjust the volume of the connected device.

Using Internal TV Speaker +Optical
(Settings) → [Sound] → [Sound Out] → [Internal TV Speaker + Audio Out (Optical)]
Audio is played through the TV’s built-in speakers and the audio device connected to the digital optical audio output port simultaneously.

Configuring digital sound output settings
(Settings) → [Sound] → [Sound Out] → [Digital Sound Out]
You can configure the [Digital Sound Out] settings.
•  These settings are available only when an Optical is selected.

To use sound test
(Settings) → [Sound] → [Sound Test]
Try Sound Test to verify that sound signal output is normal. When thetest sound is normal, check connected external devices or broadcastsignal.
To set up the channels automatically
(Settings) → [Channels] → [Auto Tuning]
Memorizes automatically the channels being broadcast.

• The channels will not be memorized properly if the antenna/cableis not installed correctly.
•  [Auto Tuning] memorizes the channels that are currently being broadcast.
• If [Lock System] is turned on, a pop-up window will appear askfor password.

To set up the channels at manually
(Settings) → [Channels] → [Manual Tuning]
Adjusts channels manually and saves the results. For digital broadcasting, signal strength, etc. can be checked.
Editing the channels
(Settings) → [Channels] → [Channel Manager]
Edits the saved channels.
To set Language
(Settings) → [General] → [Language]
You can select the language of the menu displayed on the screen and the digital sound broadcasting.

• [Menu Language]: Selects a language for the display text.
•  [Audio Language]: (In Digital mode Only) Selects the desired language when watching digital broadcasting containing several voice languages.

To set current time
(Settings) → [General] → [Time & Date] → [Set Automatically]
Checks or changes the time while watching TV.

•  Synchronizes the TV clock to the digital time information sent by the TV station.
•  [Time] / [Date] / [Time Zone]: Sets the time and date manually if the auto setup does not correspond to the current time or region.
• [Daylight Saving]: Daylight Saving Time refers to the practice of setting the clocks forward one hour from standard time during the summer months.

To use Sleep Timer
(Settings) → [General] → [Timers] → [Sleep Timer]
Turns off the TV after a prescribed number of minutes.

• To deactivate the [Sleep Timer], select [Off].

To turn on/off the TV
(Settings) → [General] → [Timers] → [Timer Power On] /  [Timer Power Off]
You can set the Power On/Off time for the TV.

• Select [Off] if you are not going to set [Timer Power On] / [Timer Power Off].
• To set [Timer Power On] / [Timer Power Off], set the curren