Sharp Air Purifier Instruction Manual

SHARP Air Purifier

Please read before operating your new Air Purifier

The air purifier draws in room air through the air inlet, circulates it through a pre-filter and a True HEPA filter inside the main unit, and then discharges it through the air outlet. The True HEPA filter can remove 99.97% of dust particles as small as 0.3
microns that pass through the filter.
Some odors absorbed by the filter will break down over time, causing additional odors. Depending on usage conditions, and especially if the product is used in environments significantly more severe than a normal household, these odors may become noticeable sooner than expected. If these odors persist, replace the filter.

NOTE: The air purifier is designed to remove air-suspended dust, but not harmful gases (for example, carbon monoxide contained in cigarette smoke).

FEATURES

Unique Combination of Air Treatment Technologies Filtration System

TRAPS DUST*
Pre-filter traps dust and other large airborne particles.

REDUCES POLLEN & MOLD*
True HEPA filter traps 99.97% of particles as small as 0.3 microns.

When air is drawn through the filter system.

CONSUMER LIMITED WARRANTY

CONSUMER LIMITED WARRANTY FOR U.S. USERS
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.

The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.

The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.

Your Product Model Number & Description:
FP-F30U Air Purifier. Be sure to have this information available when you need service for your Product.

Warranty Period for this Product:
One (1) year parts and labor from date of purchase.

Additional Item(s) Excluded From Warranty Coverage:
Appearance items of the Product, filters, accessories, or any printed materials. Product which has been used for rental and/or commercial purposes.

Where to Obtain Service: From a Sharp Authorized Servicer located in the United States. To find the location of the nearest Sharp Authorized Servicer, call Sharp Toll Free at 1-800-BE-SHARP.

What to Do to Obtain Service: Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and packaged securely.

TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP, OR VISIT OUR WEBSITE AT www.sharpusa.com
SAVE THE PROOF OF PURCHASE AS IT IS NEEDED SHOULD YOUR AIR PURIFIER EVER REQUIRE WARRANTY SERVICE.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

WARNING:

1. Read all instructions before using the product.
2. Use the product only for intended household use as described in this manual.
   Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
   Children should be supervised to ensure they do not play with the appliance.
4. Never operate the product if the power cord or plug is damaged or the product is malfunctioning or damaged.
5. If the power cord or plug is damaged, it must be replaced by the manufacturer, its service agent or a Sharp authorized Service Center in order to avoid a hazard.
   Contact the nearest Service Center for any problems, adjustments, or repairs.
6. Do not repair or disassemble the product yourself.
7. Follow the instructions a to h below for the power cord or plug. It may cause short circuit, excessive heat, electric shock or fire.
   • Use only AC 120 volt outlet.
   • Do not use the product if the power cord or plug is damaged or the connection to the wall outlet is loosened.
   • Always turn off the product before unplugging the power plug.
   • Always unplug the product before moving or maintaining it, opening the back panel, changing the filters and whenever the product is not in use.
   • Be sure to pull the power plug and not the power cord.
   • Do not touch the power plug with wet hands when inserting or unplugging from the wall outlet.
   • Periodically remove dust from the power plug.
   • Always observe the following not to damage the power cord.
     • Do not run cord under carpeting. Do not cover the power cord with throw ,rugs, runners, or similar coverings
     • Do not put heavy things on the power cord or pinch it.
     • Do not run the power cord under furniture or other appliances.
     • Run the power cord away from traffic area and where it will not be tripped over.
8. The product has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
   If it still does not fit, contact a qualified electrician or service person. Do not attempt to defeat this safety feature.
9. To reduce the risk of fire or electric shock, do not use the product with any Solid-State Speed Control Device.
10. Do not use this product near gas appliances, fire places, candle fire, incense or sparks from lit cigarettes.
11. Do not operate the product in a room with flammable gas, such as oily residue or chemical fumes.
12. Do not expose the product to rain, or use near water, in a bathroom, laundry area or other damp location.
13. Do not insert fingers or foreign objects into the air inlets or air outlets.
14. Do not look into the air outlets.

NOTE: Radio or TV Interference
If the product should cause interference to radio or television reception, try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation distance between the product and radio/TV receiver.
3. Connect the product into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

CAUTIONS CONCERNING INSTALLATION

1. Place the product on a level and stable surface with sufficient air circulation.
   When placed on heavy carpet, the product may vibrate slightly.
2. Avoid a location where the sensors are exposed to direct breeze or draft if the product has sensors. The product may not operate properly.

Avoid use in locations where furniture, fabrics, or other items may come in contact with and restrict the air inlets and/or outlets.

1. Avoid locations exposed to direct sunlight. It may cause to change shape or color of the product.
2. Avoid locations where the product is exposed to condensation or drastic changes in temperature. Use under appropriate conditions between 32 – 95 ºF (0 – 35 ºC).
3. Avoid use in locations where greasy or oily smoke is generated. (such as in a kitchen, etc.). The main unit surface may crack and the sensors may malfunction as a result.
4. The dust collecting ability of the product is effective even when the product is as close to 1.2 inches (3 cm) from the wall, but the surrounding walls or floor may get dirty. Please place the product at a distance from the wall.
   The wall directly behind the air outlets and the floor or rug on which the product placed may become dirty over time. When using the product for an extended period of time at the same location, periodically clean the walls, the floor or the rug.

CAUTIONS CONCERNING FILTER

1. Follow the instructions in this manual for filter installation and maintenance. (Page 8,10,11)
2. Take out the filters from the plastic bag before placing the filter in the main unit.
3. Do not operate the product without the filters properly installed.
4. Do not wash and reuse the True HEPA filter.
   Washing will not improve filter performance and can also cause electric shock or operating malfunctions.
5. Do not operate the product in rooms where aerosol insecticides are present.
   It may cause the odor of insecticide to remain in the product and emitted from the air outlets.

CAUTIONS CONCERNING OPERATION

1. Do not block the air inlets or air outlets.
2. Always operate the product in an upright position.
3. Always hold the handle of the product when moving it.
4. Always lift up the product when moving it on easily damaged flooring, an uneven surface, or carpet.

CAUTIONS CONCERNING MAINTENANCE

1. Follow the instructions in this manual for maintenance. (Page 10)
2. Clean the exterior with a soft cloth only.
3. Do not use volatile fluids and/or detergents.
   The main unit surface may be damaged or cracked with strong corrosive cleansers, benzine, paint thinner, polishing powder or grease. In addition, the sensors may malfunction as a result if the product has sensors.
4. Do not scrub the back panel (pre-filter) hard during its maintenance.
5. When replacing filters or any accessories, use specified parts in this manual.

PART NAMES

FRONT

BACK

FILTER INSTALLATION

• To maintain the quality of the filter, it is installed in the main unit and packaged in a plastic bag.
• Be sure to stop operation and unplug the product before filter installation or replacement.

1. Remove the back panel (pre-filter).
2. Take out the filter from the plastic bag.
3. Place the filter within the main unit.
   Do not install the filter backwards or the product will not operate properly.
4. Replace the back panel to the main unit.

OPERATION

POWER ON/OFF

NOTE: Unless the power plug has been unplugged, the operation will Auto Resume in the previous mode it was operating in.
Example: if the power is lost during operation, the operation will resume to previous operation mode and settings if power is restored.

EXPRESS CLEAN
By continuously discharging strong airflow cycles in 60 minutes, the product effectively removes airborne dust, pollen, mold and allergens from the air as they are drawn through the filter system.

NOTE: When the operation finishes, the product will return to the prior operation mode.
It is possible to change to the other fan modes or turn the product OFF while operating in EXPRESS CLEAN.

FAN SPEED

NOTE: The product will operate very quietly with low fan speed.

CARE AND MAINTENANCE

• To maintain optimum performance of this air purifier, please clean the product including the filter periodically.
• Be sure to stop operation and unplug the product before any maintenance or replacing accessories.

BACK PANEL (Pre-filter)

Gently remove dust from the back panel, using a vacuum cleaner attachment or similar tool.

NOTE: Be careful not to apply too much force to the pre-filter.

NOTE: How to clean hard to remove dirt

1. Add a small amount of dish detergent to water and soak for about 10 minutes.
2. Rinse off the dish detergent with clean water.
3. Completely dry the filter in a well-ventilated area.

TRUE HEPA FILTER

Whenever dust accumulates, when odor emanates from the air outlet, or once a month.

NOTE:

• Do not WASH in water and DRY in the sunlight.
• Perform maintenance only on the side with the tag.
  Do not clean the opposite side; otherwise, the filter will be damaged.
  The filter is fragile, be careful not to apply too much force.

MAIN UNIT

Wipe with a dry, soft cloth.
For stubborn stains or dirt, use a soft cloth dampened with warm water.

NOTE:

• Do not use volatile fluids.
  Benzine, paint thinner, polishing powder, etc. , may damage the surface.
• Do not use detergents.
  Detergent ingredients may damage the main unit.

FILTER REPLACEMENT GUIDELINES

Replacement timing When REPLACE FILTER indicator light turns on.

The REPLACE FILTER indicator light will turn on after approximately 17,500 hours. ( 2 years × 24 hours = 17,500)
Filter life varies depending on the operation mode.
After the filter is replaced, connect the power plug to the wall outlet and press the POWER ON/OFF button, then REPLACE FILTER button for 3 seconds.

REPLACEMENT AND MAINTENANCE CYCLE

According to Japan Electric Manufacture’s Association JEM 1467, the Max service life is based on the equivalent condition of the smoke from 5 cigarettes per day whereby the dust collection power is reduced by half compared with that of new filter. It is recommended to replace the filter more frequently under more severe conditions.

TROUBLESHOOTING

Before calling for service, please review the list below, since the problem may not be the product malfunction.

SPECIFICATIONS

1. Noise level is measured based on the JEM 1467 standard of the Japan Electrical Manufacturers’ Association.
2. Size of a room which is appropriate for operating the product at maximum fan speed.

Standby Power : In order to operate the electrical circuits while the power plug is inserted in the wall outlet, this product consumes of standby power.
For energy saving, unplug the power cord when the product is not in use.