Sony Wireless Speaker User Guide

SONY Wireless Speaker User Guide
https://www.sony.net/

Before operating the system, please read this guide thoroughly and retain it for future reference.

WARNING

To reduce the risk of fire or electric shock, do not expose the AC adaptor to rain or moisture.

To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc.
Do not expose the appliance to naked flame sources (for example, lighted candles).
To reduce the risk of fire or electric shock, do not expose the AC adaptor to dripping or splashing, and do not place objects filled with liquids, such as vases, on the AC adaptor.
Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.
As the main plug of the AC adaptor is used to disconnect the AC adaptor from the mains, connect it to an easily accessible AC outlet. Should you notice an abnormality in it, disconnect it from AC outlet immediately.
The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.
If your skin touches the AC adaptor or this product for a long time when the power is on, it may cause a low temperature injury.

Do not dismantle, open or shred secondary cells or batteries. In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Do not use any charger other than that specifically provided for use with the equipment. Do not use any cell or battery which is not designed for use with the equipment. Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions. After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance. Dispose of properly.

a) The power bank will generate heat when charging. Always charge in a well ventilated area. Do not charge under pillows, blankets or on flammable surfaces.

b) Keep the power bank away from heat sources, direct sunlight, combustible gas, humidity, water or other liquids.

c) Do not disassemble, open, microwave, incinerate, paint or insert foreign objects into the power bank.

d) Do not subject the power bank to mechanical shock such as crushing, bending, puncturing or shredding. Avoid dropping or placing heavy object on the power bank.

e) Do not short-circuit the power bank or store it in a receptacle where it may be short-circuited by other metallic or conductive objects.

f) Do not operate the power bank if it has been wet or otherwise damaged, to prevent against electric shock, explosion and/or injury. Contact the dealer or authorized agent.

g) Power bank usage by children should be supervised.

h) Please read the operating instructions (including charging instructions and information on the minimum and maximum operating temperatures), supplied with this power bank.

Precautions

On safety

  • The nameplate and important information concerning safety are located as follows:
    • Inside of the cap on the rear side of the system
    • On the surface of the AC adaptor

Notes on the AC adaptor

  • Use only the supplied AC adaptor. To avoid damaging the system, do not use any other AC adaptor.

On placement

  • Do not set the system in an inclined position.
  • Do not leave the system in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.
  • Do not use or leave the system in a car.
  • Do not use the system in a sauna.

About the Party Booster function

If the system hits a person or thing, it may cause an accident, injury, or malfunction. When using the Party Booster function, notice the following.

  • Disconnect the cables and close the cap when using the system.
  • Do not use with the adaptor connected.
  • When using the function, hold firmly and do not shake the system violently so that you do not throw or drop the system from your hand.
  • Before using the function, make sure that you have secured sufficient space around the system.
  • Do not hit the system with a tool.
  • Do not use the function while you are driving or walking.
  • Keep 20 cm or more away from the face and eyes while in use.
  • Avoid using the function for a long time. Take breaks regularly.
  • When using the function, if you get tired, feel uncomfortable or experience pain somewhere in your body, stop using the function immediately.

Others

  • Do not use or leave the system in an extremely cold or hot environment (temperature outside the range of 5 °C – 35 °C). If the system is used or left in outside the above range, the system may automatically stop to protect internal circuitry.
  • At high temperature, the charging may stop or the volume may reduce to protect the battery.
  • Even if you do not intend to use the system for a long time, charge the battery to its full capacity once every 6 months to maintain its performance.

About the Voice Guidance
IMPORTANT: THE SOUND GUIDANCE IS AVAILABLE IN THIS PRODUCT ONLY IN ENGLISH

Depending on the status of the system, the voice guidance outputs from the speaker as followings.

  • When setting the system to the pairing mode; “Bluetooth pairing”
  • When pressing the BATT (battery) button to check the battery power during the system is turned on; “Battery fully charged/Battery about 70%/Battery about 50%/Battery about 20%/Please charge”
  • When the battery power is low; “Please charge”
  • When the settings are completed for the Speaker Add function; “Double mode”
  • When pressing and holding the ADD (Speaker Add) button during the Speaker Add function; “Left/Right/Double mode”

On Copyrights

  • Android, Google Play and other related marks and logos are trademarks of Google LLC.
  • LDAC™ and LDAC logo are trademarks of Sony Corporation.
  • The BLUETOOTH® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license.
  • The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.
  • Apple, the Apple logo, iPhone, iPod and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
  • Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance.
  • WALKMAN and WALKMAN logo are registered trademarks of Sony Corporation.
  • Other trademarks and trade names are those of their respective owners.
  • ™ and ® marks are omitted in the documents.

Notes on waterproof and dust proof features (Read before using the system)

Waterproof and dust proof performance of the system
The system, with the cap fastened securely, has a waterproof specification of IPX7 *1 as specified in “Degree of protection against water immersion” of the IEC60529 “Ingress Protection Rating (IP Code)” *3 , and a dust proof specification of IP6X *2 as specified in “Degrees of protection against solid foreign objects” *3 .

Liquids that the waterproof performance specifications apply to

Applicable: fresh water, tap water, pool water, sea water
Not applicable: liquids other than the above (soapy water, water with detergent or bath agents, shampoo, hot spring water, etc.)

*1 IPX7 (Degree of protection against water immersion): For details, refer to the Help Guide.
*2 IP6X (Degrees of protection against dust): For details, refer to the Help Guide.
*3 The supplied accessories are not waterproof or dust proof.

The waterproof and dust proof performance of the system is based on our measurements under the conditions herein described. Note that malfunctions as a result of water immersion or dust intrusion caused by misuse by the customer are not covered by the warranty.

To avoid deterioration of waterproof and dust proof performance

Check the following and use the system correctly.

  • The system passes the drop test from 1.22 m on plywood of 5 cm thickness conforming to MIL-STD 810 F Method 516.5-Shock. However, this does not guarantee no damage, no breakdown, or waterproof and dust proof performance in all conditions. Deformation or damage from dropping the system or subjecting it to mechanical shock may cause deterioration of the waterproof and dust proof performance.
  • Do not use the system in a location where large amounts of water or hot water may splash on it. The system does not have a design that is resistant to water pressure. Use of the system in a location where high water pressure is applied, such as under running water or in the shower, may cause a malfunction.
  • Do not pour high-temperature water or blow hot air from a hair dryer or any other appliance on the system directly. Also, never use the system in high temperature locations such as in saunas or near a stove.
  • Handle the cap with care. The cap plays a very important role in maintenance of the waterproof and dust proof performance. When using the system, make sure that the cap is closed completely. When closing the cap, be careful not to allow foreign objects inside. If the cap is not closed completely the waterproof and dust proof performance may deteriorate and may cause a malfunction of the system as a result of water or dust particles entering the system.

How to care for the system

Although the fabric part of the system has water repellent treatment applied, you can use the system more comfortably and for a longer period of time by following the maintenance procedure below.

  • If the surface of the system gets dirty in the following cases, wash the system with fresh water (tap water, etc.) promptly to remove the dirt. Leaving dirt on its surface may cause the fabric part to discolor or deteriorate, or the system to malfunction.
    Ex.
    • When salt, sand, etc. is stuck on the system after using it on a beach, pool side, etc.
    • When the system is stained with foreign substances (sunscreen, suntan oil, etc.)
  • If the system gets wet, wipe off the moisture using a dry soft cloth immediately. In addition, dry the system in an airy place until no moisture remains.
  • The sound quality may change when water enters the speaker section of the system. It is not malfunction. Wipe off the moisture on its surface, and put the system on a dry soft cloth with the SONY logo facing down to drain the collected water inside the system. Then, dry the system in an airy place until no moisture remains.

Note

  • If the surface of the system gets dirty, do not use detergent, thinner, benzine, alcohol, etc. to clean the system because it will affect the water repellent function of the fabric part of the system.
  • Especially in cold regions, be sure to wipe off the moisture after using the system. Leaving moisture on its surface may cause the system to freeze and malfunction.
  • Do not place the system directly on sand, such as in a sandbox or on a sandy beach. If sand grains, etc. enter the fabric part of the system, remove them carefully. Never use a vacuum cleaner, etc. on the system. It may cause damage of the speaker unit.

Specifications