LG SL5Y Wireless Sound Bar User Manual

LG SL5Y Wireless Sound Bar

Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual.
Some of the content in this manual may differ from your unit.

Content Box

Front Panel

(Standby) : Switches the unit ON or OFF.
F (Function): Selects function.
-/+ (Volume): Adjusts volume.

Rear Panel

DC IN: Connect to the AC adapter.
OPTICAL IN: Connect to an optical device.
HDMI IN: Connect to device with HDMI OUT.
HDMI OUT (TV ARC): Connect to a TV.
USB Port: Connect to a USB device.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and follow steps below.

  1. Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
  2. Turn on the sound bar.
    • The sound bar and wireless subwoofer will be automatically connected. The subwoofer’s green LED turns on.

Manual Subwoofer Connection

If the subwoofer does not make sound, try to connect manually.

  1. Press Pairing on the rear of the wireless subwoofer.
    • The green LED on the rear of the wireless subwoofer blinks quickly. (If the green LED does not blink, press and hold the Pairing.)
  2. Turn on the sound bar.
    • Pairing is completed. The green LED on the rear of the wireless subwoofer turns on.

Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.

TV Connection

Connect the sound bar and TV using Optical (A ) or HDMI ARC ( B).

Optical Connection

  1. Connect the sound bar to the TV using Optical cable.
  2. Set up [External Speaker (Optical)] on your TV setting menu.

HDMI (ARC) Connection

  1. Connect the sound bar to the TV using HDMI cable.
  2. Set up [External Speaker (HDMI ARC)] on your TV setting menu.
  • HDMI connection is unavailable if your TV does not support HDMI ARC.
  • If this unit is connected by OPTICAL and ARC at the same time, the ARC signal is a high priority.
Additional Device Connection
  1. Connect to the external device like as follow.
  2. Set the input source by pressing F repeatedly.

Remote control

  • Bluetooth connection lock (BT LOCK): Select the Bluetooth function by pressing F repeatedly. Long press N and press it again to limit Bluetooth connection to only BT and LG TV.
  • SOUND EFFECT: Selects a sound effect mode.
  • TV remote: Long press SOUND EFFECT and press it again to use TV remote control.
    FOLDER W/S: Searches a folder.
    Displays the information of a file, an input source or connected Bluetooth device name.
  • Auto Power ON/OFF: Long press button and press it again.

Additional Information

Specification
Power consumption Refer to the main label.
AC adapter •   Model : DA-50F25

•   Manufacturer : Asian Power Devices Inc.

•  Input : 100 – 240 V ~ 50 – 60 Hz

•   Output : 25 V 0 2 A

Dimensions (W x H x D) Approx.

890.0 mm X 57.0 mm X

85.0 mm With foot

Bus Power Supply (USB) 5 V 0 500 mA
Amplifier (Total RMS Output power) 400 W RMS

Design and specifications are subject to change without notice.

OPEN SOURCE SOFTWARE NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to .
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.