SAMSUNG SM-R180 Galaxy Buds Live User Manual

Basics

Read me first

Please read this manual before using this device to ensure safe and proper use.

• Descriptions are based on the device’s default
• Some content may differ from your device depending on the region, model specifications, or device’s Images may differ in appearance from the actual product. Content is subject to change without prior notice.
• Before using other mobile devices, make sure they are compatible with the Visit www.samsung.com to see the specifications of compatible mobile devices.
• Be careful to not get the device wet while using The device could malfunction if it is damaged by water. Do not wear the device during activities, such as showering or swimming. Doing so can damage the device.
• Modifying the device’s operating system or installing softwares from unofficial sources may result in device malfunctions and data corruption or These actions are violations of your Samsung licence agreement and will void your warranty.
• Some functions may not work as described in this manual depending on the maker and model of the mobile device you connect to the
• This product includes certain free/open source software. To see the instructions for viewing the open source licence, go to the Samsung website (samsung.com).

Instructional icons

 Warning: situations that could cause injury to yourself or others
Caution: situations that could cause damage to your device or other equipment
Notice: notes, usage tips, or additional information

About the Galaxy Buds Live

Galaxy Buds Live are wireless earbuds which allow you to listen to music or answer incoming calls after connecting them to your device even while doing other activities, such as working out.

Do not wear the earbuds in high-traffic areas, such as roads or crosswalks. Doing so may result in accidents due to slowed reaction times

Device layout and functions

Package contents

Refer to the quick start guide for package contents.

• The items supplied with the Galaxy Buds Live, available accessories, and their images may vary depending on the
• The supplied items are designed only for the Galaxy Buds Live and may not be compatible with other
• Appearances and specifications are subject to change without prior
• You can purchase additional accessories from the Samsung Make sure they are compatible with the models before purchase.
• Use only Samsung-approved Using unapproved accessories may cause the performance problems and malfunctions that are not covered by the warranty.

Availability of all accessories is subject to change depending entirely on manufacturing companies. For more information about available accessories, refer to the Samsung website.

Device layout

Earbud

If you use the earbuds when they are broken, there may be a risk of injury. Use the earbuds only after they have been repaired at a Samsung Service Centre.

If foreign materials are placed on the touch-sensitive sensor, they may cause the sensor to malfunction. Before wearing the earbuds, clean the sensor first.

Charging case

If there is sweat or liquid on the charging contacts, corrosion may occur on the Galaxy Buds Live. When there is sweat or liquid on the charging contacts or earbuds, clean them before inserting the earbuds in the charging case.

Attaching a wing tip to the earbud

1. Select the wing tip that fits your
2. Select the wing tip for the left or right ear by checking for the L or R mark on the wing
3. Find the L or R mark on the bottom of wing tip’s back side, and ensure that it is facing the Hook the wing tip into the fixation hook.
   
   Do not put the earbuds in your ears without wing Doing so may hurt your ears.
   Do not pull the wing tip excessively when you attach or detach The wing tip may tear.
   Do not put the wing tips on the earbuds in the wrong direction. The earbuds will not fit in your ears properly.
4. Cover the rest of earbud with the wing
5. Follow the same procedure for the opposite

Battery

Charging the battery

Fully charge the battery before using the earbuds for the first time or when they have been unused for extended periods. The earbuds will power on while charging. When you charge the battery for the first time or when the battery is completely discharged, it needs at least 10 minutes to start to work.
Check the direction of each earbud, insert them into the corresponding slots, and then connect the charger.

The charging case, which has a built-in battery, is charged along with the earbuds that are in the charging case when connected to the charger.

Use only Samsung-approved battery, charger, and cable specifically designed for your device. Incompatible battery, charger, and cable can cause serious injuries or damage to your device.

• Connecting the charger improperly may cause serious damage to the charging Any damage caused by misuse is not covered by the warranty.
• Use only USB Type-C cable supplied with the The charging case may be damaged if you use Micro USB cable.
• Chargers are sold separately
• To save energy, unplug the charger when not in The charger does not have a power switch, so you must unplug the charger from the electric socket when not in use to avoid wasting power.
• You cannot use your earbuds’ wireless features while charging the earbuds’
• Keep the charging case closed while you store or charge the earbuds, or when you charge the charging
• If you touch the charging contacts while charging the charging case, it may affect
• If there is sweat or liquid on the charging contacts, corrosion may occur on the Galaxy Buds Live. When there is sweat or liquid on the charging contacts or earbuds, clean them before inserting the earbuds in the charging
• When you insert your earbuds in the charging case, the charging will start automatically, and it will stop automatically if earbuds are fully
• It will likely not have a huge impact on the life of your Galaxy Buds Live even if you do not remove your earbuds from the charging case after the earbuds are fully
• If you will not be using your Galaxy Buds Live for a long time, store them after they are

Do not put the wing tips on the earbuds in the wrong direction. The earbuds will not be charged if they are not properly inserted into the charging case.

1. Open the charging
2. Check the direction of each earbud and correctly insert them into their corresponding slots in the charging
   
3. Close the charging
   
4. Connect the USB cable to the charger and then plug the USB cable into the charger
   
   Connecting the USB cable improperly may cause serious damage to the charging case. Any damage caused by misuse is not covered by the warranty.
5. Plug the charger into an electric The batteries of the earbuds and the charging case are charged simultaneously.
6. After fully charging, disconnect the charging case from the First unplug the USB cable from the charging case and then unplug the charger from the electric socket.

Reducing the battery consumption

When you are not using the earbuds, store them in the charged charging case. The touch-sensitive sensor will continue to work while wearing the earbuds and reduce the usage time.

Battery charging tips and precautions

• If there is sweat or liquid on the charging contacts, corrosion may occur on the Galaxy Buds When there is sweat or liquid on the charging contacts or earbuds, clean them before inserting the earbuds in the charging case.
• Using a power source other than the charger, such as a computer, may result in a slower charging speed due to a lower electric
• While charging, the Galaxy Buds Live and the charger may heat up. This is normal and should not affect the Galaxy Buds Live’s lifespan or performance. If the battery gets hotter than usual, the charger may stop charging. If this occurs during wireless charging, disconnect the Galaxy Buds Live from the charger to let them cool down, then charge the Galaxy Buds Live again
• If you charge the Galaxy Buds Live while the charger port is wet, the Galaxy Buds Live may be Thoroughly dry the charger port before charging the Galaxy Buds Live.
• If the Galaxy Buds Live are not charging properly, take the Galaxy Buds Live and the charger to a Samsung Service
• Avoid bending the USB cable. Doing so may damage or reduce the lifespan of the USB cable. Never use a damaged USB cable.

Wireless charging

The charging case has a built-in wireless charging coil. You can charge the battery by using a wireless charger or another device that functions as a wireless charger.

Charging the battery with a wireless charger

1. Open the charging
2. Check the direction of each earbud and correctly insert them into their corresponding slots in the charging
3. Close the charging
4. Place the centre of the charging case’s back on the centre of the wireless charger.
   
5.  After fully charging, disconnect the charging case from the wireless

Precautions for wireless charging

Do not place the charging case on the wireless charger when conductive materials, such as metal objects and magnets, are placed between the charging case and the wireless charger.
The Galaxy Buds Live may not charge properly or may overheat, or the charging case may be damaged.
Use Samsung-approved wireless chargers. If you use other wireless chargers, the battery may not charge properly.

Charging the battery using Wireless PowerShare

1. Open the charging
2. Check the direction of each earbud and correctly insert them into their corresponding slots in the charging
3. Close the charging
4. Place the centre of the charging case’s back on the device that functions as a wireless
   The location of the wireless charging coil may vary by device. Adjust the device and the charging case to make a strong connection.
   
5. After fully charging, disconnect the charging case from the device that functions as a wireless

• To charge properly, do not move or use either the device that functions as a wireless charger or the charging case while
• The power charged to the Galaxy Buds Live may be less than the amount shared to them by the device that functions as a wireless
• If you charge the Galaxy Buds Live while charging the device that functions as a wireless charger, the charging speed may decrease or the Galaxy Buds Live may not charge properly, depending on the charger
• The charging speed or efficiency may vary depending on the device’s condition or the surrounding
• If the remaining battery power of the device that functions as a wireless charger drops below a certain level, power sharing will

Checking the battery level

Connect the earbuds to your mobile device, launch the Galaxy Wearable app on your mobile device, and view the battery status of each earbud and the charging case. Refer to Connecting the earbuds to a mobile device for more information.

When the remaining battery level is low, a notification will appear on the mobile device’s notification panel.

Battery indicator lights identification

The battery indicator lights inform you of your earbuds and the charging case’s charging status. The earbud battery indicator light is located inside of the charging case and shows the charging status of the earbuds. The charging case battery indicator light on the front of the charging case indicates the charging status of the case itself.

Earbud battery indicator light

Charging case battery indicator light

• The charging case battery indicator light flashes red when the external power is cut off during
• If the battery indicator lights do not work as described, disconnect the charger from the charging case and reconnect
• The charging case battery indicator light will turn on only after inserting the earbuds into the charging case and closing

Using the earbuds

Connecting the earbuds to a mobile device

Connecting the earbuds to a Samsung mobile device for the first time

1. Check the direction of each earbud and correctly insert them into their corresponding slots in the charging If the earbud battery indicator light does not flash, connect the charging case to the charger and charge them for more than 10 minutes.
2. Close the charging case.
3. Open the charging
   The earbuds will enter Bluetooth pairing mode automatically and a pop-up window will appear on your mobile device. If the pop-up window does not appear or if you want to connect to a non-Samsung mobile device that also uses the Android OS, refer to Connecting to a non-Samsung mobile device that also uses the Android OS (or, the connection pop-up window does not appear).
   When the charging case battery indicator light flashes in red, take out the earbuds from the charging case and insert them into the case again.
4. On your mobile device, tap Connect on the pop-up window.
   
   The connection pop-up window will appear only on Samsung mobile devices running Android 7.1.1 or later that have the SmartThings app installed. If the pop-up window does not appear, update the SmartThings app to the latest
   The appearance of the pop-up window may vary depending on your connected mobile
5. Follow the on-screen instructions to complete the Once the earbuds are connected to your mobile device, they will automatically attempt to connect to your mobile device whenever you open the charging case while the earbuds are inside it.

• If the earbuds do not connect to a mobile device within three minutes, Bluetooth pairing mode will be Close the charging case again and open it. The earbuds will enter Bluetooth pairing mode.
• If you want to connect to another mobile device after a connection has been established, refer to Connecting with other devices after disconnecting from the previous mobile device.
• When connecting earbuds with a mobile device that has been signed in to a Samsung account, the earbuds pairing information will be synced on the other mobile devices that use the same Samsung account and you do not need to pair them at the beginning again. To connect the other devices that use the same Samsung account with the earbuds, on the mobile devices that you want to connect, tap Settings → Connections → Bluetooth, and then select the earbuds synced through the Samsung
• If only a single earbud is connected to your mobile device, you will hear the sound in mono. It will automatically switch to stereo mode when both earbuds are connected to your mobile
• If the earbuds do not connect to a mobile device, the connection pop-up window does not appear, or your mobile device cannot find the earbuds, touch and hold both earbuds while wearing them to enter Bluetooth pairing mode manually. When Bluetooth pairing mode is entered, you will hear a sound. However, you cannot use this method when you are playing music after setting the volume adjustment as a preset touch-and-hold feature.

Connecting to a non-Samsung mobile device that also uses the Android OS (or, the connection pop-up window does not appear)

1 On your mobile device, launch Galaxy Store or Play Store and download the Galaxy
Wearable app.

• You can download the Galaxy Wearable app only on mobile devices running Android operating system 5.0 (API 21), or later, and with 1.5 GB of RAM or more.
• You can change the language of the Galaxy Wearable app on your connected mobile device. On your mobile device, launch Settings → General management
  → Language and input → Language. English may appear by default if the selected language on the Settings screen is not supported on the Galaxy Wearable app.
•  When connecting to an iOS mobile device, launch the App Store app and install the Samsung Galaxy Buds app to connect your earbuds to your device. You can only download the Samsung Galaxy Buds app on mobile devices supporting iPhone 7 or later and the iOS10 version or higher. Some features may not be available.

2 Check the direction of each earbud and correctly insert them into their corresponding slots in the charging case. If the earbud battery indicator light does not flash, connect the charging case to thecharger and charge them for more than 10 minutes.
3 Close the charging case.
4 Open the charging case. The earbuds will enter Bluetooth pairing mode automatically.
5 On your mobile device, activate the Bluetooth feature to connect the earbuds to your mobile device, launch the Galaxy Wearable app, and then follow the on-screen instructions to complete the connection

Tips and precautions when connecting to the mobile device

• If the earbuds do not connect to a mobile device within three minutes, Bluetooth pairing mode will be deactivated. Close the charging case again and open it. The earbuds will enter Bluetooth pairing
• If you want to connect to another mobile device after a connection has been established, refer to Connecting with other devices after disconnecting from the previous mobile device.
• If the earbuds do not connect to a mobile device, the connection pop-up window does not appear, or your mobile device cannot find the earbuds, touch and hold both earbuds while wearing them to enter Bluetooth pairing mode When Bluetooth pairing mode is entered, you will hear a sound. However, you cannot use this method when you are playing music after setting the volume adjustment as a preset touch-and-hold feature.
• Connection methods may vary depending on your device and software
• You can download the Galaxy Wearable app only on mobile devices running Android operating system 0 (API 21), or later, and with 1.5 GB of RAM or more.

Tips and precautions for using Bluetooth

Bluetooth is a wireless technology standard that uses a 2.4 GHz frequency to connect to various devices over short distances. It can connect and exchange data with other Bluetooth enabled devices, such as mobile devices, without connecting via cables.

Notices for using Bluetooth

• To avoid problems when connecting your earbuds to another device, place the devices close to each
• Ensure that your earbuds and the other Bluetooth device are within the Bluetooth connection range (10 m). The distance may vary depending on the environment the devices are used
• Ensure that there are no obstacles between the earbuds and a connected device, including human bodies, walls, corners, or
• Do not touch the Bluetooth antenna of a connected
• Bluetooth uses the same frequency as some industrial, scientific, medical, and low power products and interference may occur when making connections near these types of
• Some devices, especially those that are not tested or approved by the Bluetooth SIG, may be incompatible with the
• Do not use the Bluetooth feature for illegal purposes (for example, pirating copies of files or illegally tapping communications for commercial purposes).

Wearing the earbuds

Adjust the earbuds to fit your ears.

• Your device contains magnets, which may affect medical devices, such as pacemakers or implantable cardioverter If you are using any of these medical devices, keep your device a safe distance from them and consult with your physician before you use the device.
• Keep a safe distance between your device and objects that are affected by Objects such as credit cards, passbooks, access cards, boarding passes, or parking passes may be damaged or disabled by the magnets in the device.
• If the touch-sensitive sensor does not make contact with your ear, the earbud may not Use the wing tips that fit your ears if you do not hear a sound informing you that the earbud is detected.
• If the earbuds are not positioned correctly in your ears, they may not If this is the case, use a pair of wing tips that fit your ears and wear the earbuds properly.

Follow all posted warnings and directions from authorised personnel in areas where the use of wireless devices is restricted, such as aeroplanes and hospitals.

1. Hold the upper and lower sides of each earbud and remove them from the charging case.
   
2. Check the direction of each earbud and point their lower halves (speaker) in the direction of the lower part of your ear.
3. Place the lower and upper halves into the corresponding parts of your ears, and then adjust the earbuds so they fit.
   The touch-sensitive sensor will automatically detect that you are wearing the earbuds when you put them on. Then, the earbud will emit a sound informing you that the earbud is detected.

Using the earbud by touch

Touch the earbud to play or stop music or answer or reject calls. You can also set the earbuds to perform other actions by touch.

• To avoid hurting your ears, do not apply excessive pressure to the earbuds with your
• To avoid damaging the touch areas, do not touch the earbuds with anything sharp

Single touch

• Play or pause
• Stop using the Text-to-Speech

Double touch

• Play next
• Answer or end a
• Place the current call on hold and answer the second
• Switch between the current call and the held

 

Triple touch

• Play previous
  • If you touch the earbud three times three seconds after a track begins playing, it will start the track from beginning. Touch the earbud three times within three seconds of when a track begins playing to play the previous

Touch and hold

• Activate a preset
  • It is set by default to launch active noise Refer to Setting a preset touch-and- hold feature for more information about changing preset menus.
• Decline a call.

If the earbuds do not connect to a mobile device, the connection pop-up window does not appear, or your mobile device cannot find the earbuds, touch and hold both earbuds while wearing them to enter Bluetooth pairing mode manually. When Bluetooth pairing mode is entered, you will hear a sound. However, you cannot use this method when you are playing music after setting the volume adjustment as a preset touch-and-hold feature.

Locking the earbuds’ touch feature

You can prevent unintended actions by locking the earbuds’ touch feature.

1.  Launch the Galaxy Wearable app on the mobile device.
2.  Tap Touch controls.
3. Tap the Block touches switch to activate it.

Setting a preset touch-and-hold feature

You can select a preset touch-and-hold feature of each earbud to activate features quickly and conveniently.

1. Launch the Galaxy Wearable app on the mobile
2. Tap Touch controls.
3. Tap Left or Right under Touch and hold.
4. Select a feature that you want to use as a preset touch-and-hold feature.

•  Active noise cancelling: Activate or deactivate the active noise cancelling feature which blocks out the external sounds around you. Refer to Using the active noise cancelling feature for more information.
•  Voice command (Bixby): Start a conversation with an intelligent voice assistant service. When using Bixby, refer to Using Bixby for more information.
• Volume down/Volume up: Adjust the volume.
•  If you select the volume adjustment feature as one side’s preset touch-and-hold feature, the other side’s preset touch-and-hold feature is also automatically set to the volume adjustment feature.
• When the volume adjustment feature has been already selected and you try to change the one side’s preset touch-and-hold feature, the other side’s preset touch-and-hold feature is automatically set to launch the active noise cancelling feature.

Using the active noise cancelling feature

Activate the active noise cancelling feature to block out the external sounds around you. Use it when you want to avoid distractions, such as when listening to music.
To launch the feature with the earbuds, make sure that the preset touch-and-hold feature is set to active noise cancelling and then touch and hold the earbud.
If the microphone and its area (the outer microphone while wearing the earbuds) are covered completely, feedback may occur when launching the active noise cancelling feature.

Using Bixby

Introduction

Bixby is a user interface that helps you use your device more conveniently.

You can talk to Bixby. Bixby will launch a function you request or show the information you want on the connected mobile device.

• This feature is available only when a mobile device that supports Bixby is
• Only some languages are available depending on Bixby set on your mobile Certain features may not be available depending on your region.
• When you select the volume adjustment feature as one side’s preset touch-and- hold feature, the other side’s preset touch-and-hold feature is also automatically set to the volume adjustment feature, and you cannot launch Bixby. Refer to Setting a preset touch-and-hold feature for more information about changing preset

Using Bixby

1. Make sure you set a preset touch-and-hold feature for launching Bixby and touch and hold the Alternatively, say “Hi, Bixby”. Bixby will be launched on your connected mobile device.
2. Say what you want to Bixby will launch the function you request or show the information you want on the connected mobile device when it recognises what you say through the Galaxy Buds Live. To repeat what you said before or to say something new, touch and hold the earbud.

Waking up Bixby using your voice

You can start a conversation with Bixby by saying “Hi, Bixby” while wearing the earbuds.

1. Launch the Galaxy Wearable app on the mobile device and tap Advanced.
2. Tap the Bixby voice wake-up switch to activate

When you activate this feature on your Galaxy Buds Live, the Bixby voice wake-up feature on your connected mobile device will also be activated automatically.

Tips for better voice recognition

• Speak
• Speak in quiet
• Do not use offensive or slang
• Avoid speaking in dialectal

The Galaxy Buds Live may not recognise what you say or may perform unwanted commands depending on your surroundings or how you speak.

Listening to music

Listen to music saved in your mobile device by connecting the earbuds to the mobile device. You can stream music played from the connected mobile device. On your mobile device, launch a music player app and play music. You can listen to music through your earbuds.

Playing or pausing the track

Touch the earbud to play and pause the track.

Playing the next track

Double touch the earbud to play the next track during playback.

Playing the previous track

Touch the earbud three times to play the previous track during playback.

If you touch the earbud three times three seconds after a track begins playing, it will start the track from beginning. Touch the earbud three times within three seconds of when a track begins playing to play the previous track.

Adjusting the volume

You can adjust the volume by touching and holding the earbud after setting it as a preset touch-and-hold feature.

1. Launch the Galaxy Wearable app on the mobile device and tap Touch controls.
2. Tap Left or Right under Touch and hold and select Volume down or Volume up.

If you select the volume adjustment feature as one side’s preset touch-and-hold feature, the other side’s preset touch-and-hold feature is also automatically set to the volume adjustment feature.

• Touch and hold the right earbud and release your finger when you reach the desired volume to increase the Touch and hold the left earbud and release your finger when you reach the desired volume to decrease the volume.
• Adjust the volume via your connected mobile device if a sound is low in your earbuds while at full
• If you connect the earbuds to your mobile device while listening to music, the volume may change.

Using the equaliser

You can select from six different equaliser presets and enjoy the same music with a different and unique sound. Launch the Galaxy Wearable app on the mobile device and select a preset you want on the Equaliser card.

Using call features

When the earbuds are connected to a mobile device, you can answer and control calls from the connected mobile device.

Answering or declining a call

When a call comes in while you are wearing the earbuds, they will emit a sound and a voice notification will inform you of the incoming call’s phone number or the name saved in your contacts.
To answer the call, double touch the earbud.
To decline the call, touch and hold the earbud.

If you are not notified of the incoming call’s phone number or the name saved in your contacts via voice notification, launch the Galaxy Wearable app on the mobile device and tap Read notifications aloud → See all. Then, tap , select All, and then tap the Incoming call switch to activate the feature.

Answering a second call

When a second call comes in during a call, the earbuds will emit a sound. To stay on the current call and reject an incoming second call, touch and hold the earbud. To place the current call on hold and answer the second call, double touch the earbud. To switch between the current call and the held call, double touch the earbud during a call.

Ending a call

Double touch the earbud to end the current call.

Galaxy Wearable App

Introduction

To connect the earbuds to a mobile device, you must install the Galaxy Wearable app on your mobile device. Using the Galaxy Wearable app, you can view the Galaxy Buds Live status and customise their settings.

Launch the Galaxy Wearable app on your connected mobile device.

• If it is the first time connecting the earbuds and a mobile device, refer to Connecting the earbuds to a mobile device for more
• Some features may not be available depending on the type of connected mobile

Connecting and disconnecting the earbuds

Disconnecting mobile devices from the earbuds

Insert the earbuds into the charging case and close it. The Bluetooth connection will end.
To manually disconnect the earbuds from your mobile device, launch the Galaxy Wearable app on the mobile device and tap Disconnect. Or, on your mobile device, tap Settings → Connections → Bluetooth and unpair the earbuds and your mobile device.

Reconnecting devices with the earbuds that temporarily disconnected

To reconnect the earbuds that temporarily disconnected from a device, insert them into the charging case and close it. Then, open the charging case again. Alternatively, tap Connect on the top right of the Galaxy Wearable app on your mobile device.

Connecting with new earbuds

You can temporarily disconnect the earbuds from your mobile device and connect additional ones. Launch the Galaxy Wearable app on the mobile device and tap Add new device.

Connecting with other devices after disconnecting from the previous mobile device

On your mobile device, tap Settings → Connections → Bluetooth and tap the switch to deactivate the Bluetooth feature or unpair the earbuds and your mobile device under Paired devices. The connection between the earbuds and previous mobile device will end. Close the charging case again and open it to enter the Bluetooth pairing mode. Launch the Galaxy Wearable app on your mobile device and follow the on-screen instructions to complete the connection.

Switch the devices connected with earbuds

When the earbuds are connected with two or more mobile devices, you can switch the mobile devices easily without disconnecting from the previous mobile device. On the mobile device that you want to switch to, tap Settings → Connections → Bluetooth, and then select earbuds under Paired devices.

Viewing Galaxy Buds Live status and customising settings

View the status of the Galaxy Buds Live that are connected to your mobile device and change its settings.

Launch the Galaxy Wearable app on the mobile device.

Active noise cancelling

Set the earbuds to block out the external sounds around you while you are listening to music.

Equaliser

Select an equaliser preset you want to use.

Touch controls

Change the touch-related settings of the earbuds and learn the touch commands. Launch the Galaxy Wearable app on the mobile device and tap Touch controls.

• Block touches: Lock the earbuds’ touch To lock the earbuds’ touch feature, tap the switch to activate it. Refer to Locking the earbuds’ touch feature for more information.
• Touch and hold: Select a feature to be used as a preset touch-and-hold Refer to Setting a preset touch-and-hold feature for more information.
• Trouble tapping? Learn how: Learn where you have to touch your earbuds and how to touch them correctly by following the on-screen

Read notifications aloud

You will receive notifications from the mobile device’s apps via the earbuds.

Launch the Galaxy Wearable app on the mobile device and tap Read notifications aloud.

• Read aloud while using phone: Set the earbuds to receive notifications of the mobile device even when you are using the mobile
• App notifications to read aloud: Select the apps you want to receive notifications from and change the notification settings for each

Advanced

Activate advanced features of the Galaxy Buds Live.

Launch the Galaxy Wearable app on the mobile device and tap Advanced.

• Bixby voice wake-up: Wake Bixby by voice to start a conversation with an intelligent voice assistant
• Seamless earbud connection: You can quickly change the mobile device to connect your earbuds Activate the feature to quickly switch the connection from the current mobile device to a nearby mobile device logged in via the same Samsung account or a device that has previously connected with your earbuds.

Be careful to not connect your earbuds to another person’s mobile device.

Labs

Use new and experimental Galaxy Buds Live features.

Launch the Galaxy Wearable app on the mobile device and tap Labs.

• Gaming mode: Minimise audio delay to remove the time lag from the video and sound output, and listen to vivid sound when launching a

This feature is available only when connecting with a Samsung mobile device that uses the Android OS.

• Relieve pressure with ambient sound: Set to reduce feelings of pressure or stress while wearing your earbuds when the active noise cancelling feature is deactivited.

Find My Earbuds

If you misplace your earbuds, use the Galaxy Wearable app on your mobile device to find it.

1. Launch the Galaxy Wearable app on the mobile device and tap Find My Earbuds.
2. Tap Start.
   Your earbuds will start beeping.
3. Tap Stop to stop the beeping sound for both

Tap  under each earbud to stop the beeping sound for each earbud separately.

Do not use this feature when wearing the earbuds as it may result in hearing damage due to the loud noise.

General

You can reset all your earbuds settings.

Launch the Galaxy Wearable app on the mobile device and tap General → Reset.

 

Earbuds software update

Update your earbuds’ software via the firmware over-the-air (FOTA) service.

Launch the Galaxy Wearable app on the mobile device and tap Earbuds software update.

• Download and install: Check for and install updates
• Last update: View the information for the latest software

Tips and user manual

View how to use the Galaxy Buds Live.

Launch the Galaxy Wearable app on your mobile device and tap Tips and user manual to view the quick tips for using the Galaxy Buds Live. Tap User manual to view the full user manual..

About earbuds

View the information of the Galaxy Buds Live.

Launch the Galaxy Wearable app on your mobile device and tap About earbuds. To change your Galaxy Buds Live’s name, tap Edit.

• Legal information: View the legal information for the Galaxy Buds
• Software information: View the earbuds’ software
• Battery information: Check the earbuds and charging case’s battery

Appendix

Troubleshooting

Before contacting a Samsung Service Centre, please attempt the following solutions. Some situations may not apply to your Galaxy Buds Live.

Your earbuds do not work

• The battery may be completely discharged. Charge the battery completely before using the
• If an earbud’s touch-sensitive sensor does not make contact with your ear, the earbud may not If you do not hear a sound informing you that the earbuds are detected, remove the earbuds from your ears and put them in again.
• If the earbuds’ touch feature becomes unresponsive or the earbuds do not work properly, insert the earbuds into their corresponding slots in the charging case, close the charging case, and then remove them after seven seconds or

Bluetooth device cannot locate your earbuds

• Close the charging case again and open it to enter the Bluetooth pairing
• Ensure that your earbuds and the other Bluetooth device are within the Bluetooth connection range (10 m). The distance may vary depending on the environment the devices are used

If the tips above do not solve the problem, contact a Samsung Service Centre.

A Bluetooth connection is not established or your earbuds and the mobile device are disconnected

• Ensure there are no obstacles, such as walls or electrical equipment, between the
• Ensure that the latest version of the Galaxy Wearable app is installed on the mobile If necessary, update the Galaxy Wearable app to the latest version.
• Ensure that your earbuds and the other Bluetooth device are within the Bluetooth connection range (10 m). The distance may vary depending on the environment the devices are used
• Restart the mobile device and relaunch the Galaxy Wearable
• If only a single earbud is connected to your mobile device, restart the earbuds to connect them To restart the earbuds, refer to Restarting the earbuds for more information.

The battery does not charge properly (For Samsung-approved chargers)

• Ensure that the charging contacts of the earbuds and the charging contacts of the charging case are in contact with each
• Ensure that the charger is connected properly to the charging
• If the charging contacts are dirty, the battery may not charge Wipe both gold-coloured contacts with a dry cloth and try charging the battery again.

If the tips above do not solve the problem, contact a Samsung Service Centre.

The charging time and the battery life is different between the earbuds

• The charging time may differ between the two earbuds even if they started charging at the same
• The charging time and the remaining battery may differ between the two earbuds due to different inner

The battery depletes faster than when first purchased

• When you expose the Galaxy Buds Live or the battery to very cold or very hot temperatures, the useful charge may be
• The battery is consumable and the useful charge will get shorter over time.

You cannot hear others speaking

Adjust the volume on the connected mobile device.

Sound echoes during a call

Adjust the volume with the connected mobile device or move to another area.

Audio quality is poor

• Wireless network services may be disabled due to issues with the service provider’s Ensure to keep the earbuds away from electromagnetic waves.
• Ensure that your earbuds and the other Bluetooth device are within the maximum Bluetooth range (10 m). The distance may vary depending on the environment the devices are used
• You may experience drops in volume or noise depending on the connected device’s To avoid this, appropriately adjust the connected device’s sound.

Your earbuds sound comes slower than the screen when playing videos and games

The earbuds may have a time lag between the video and sound output when playing videos or games when connected to a mobile device.

Your Galaxy Buds Live are hot to the touch

When you use the Galaxy Buds Live for an extended period of time, it may feel hot to the touch. This is normal and should not affect your Galaxy Buds Live’s lifespan or performance.
If the Galaxy Buds Live overheat or feel hot for a prolonged period, do not use them for a while. If the Galaxy Buds Live continue to overheat, contact a Samsung Service Centre.

A small gap appears around the outside of the Galaxy Buds Live

• This gap is a necessary manufacturing feature and some minor rocking or vibration of parts may
• Over time, friction between parts may cause this gap to expand slightly

Managing the Galaxy Buds Live

Basic maintenance

• Use a soft, dry cloth to clean the earbuds after
• Keep the earbuds Prevent liquid from contacting or entering the earbuds.
• Clean the earbuds regularly to prevent earwax or debris from building up in the speaker and the air

Cleaning the speaker and the air duct

If the volume is lower than it should be with the current setting, clean the speaker and the air duct. Remove any earwax or debris with a clean, dry, and soft brush, cotton swabs, or other tools.

Do not use anything sharp or excessive force while removing earwax or debris. The speaker and the air duct may be damaged.

Cleaning the charging contacts

If the battery does not charge properly, wipe both gold-coloured contacts with a dry cloth.

Cleaning the earbuds and charging case

When the charging case and earbuds are exposed to foreign materials, such as dust, sand, or metal shavings, the Galaxy Buds Live may not charge properly or may be damaged. If the earbuds or the charging case were exposed to foreign materials, wipe them with a soft and dry cloth before inserting them into the charging case.

Restarting the earbuds

If the earbuds’ touch feature becomes unresponsive or the earbuds do not work properly, restart the earbuds.
To restart the earbuds, insert the earbuds into their corresponding slots in the charging case and remove them after seven seconds or more.

If the charging case has low battery, connect the charging case to the charger first.

Coupling the earbuds

When you lose one of the earbuds, you do not have to purchase a new set of earbuds because you can make a new set of earbuds with a newly purchased earbud and the other earbud that you already have.

1. Check the direction of each earbud, the newly purchased earbud and previously used earbud, and correctly insert them into their corresponding slots in the charging
2. Touch and hold both earbuds for seven seconds or more. The earbud battery indicator light will flash green and turn off. Then, the earbuds are coupled.
   The earbud battery indicator light will keep flashing red when the earbuds are not coupled properly. Remove the earbuds from the charging case and insert them again. Then, touch and hold both earbuds for seven seconds or more.
3. Connect the earbuds to a mobile For more information, refer to Connecting the earbuds to a mobile device.

Removing the battery

•  To remove the battery, contact an authorised service centre. To obtain battery removal instructions, please visit www.samsung.com/global/ecodesign_energy.
• For your safety, you must not attempt to remove the If the battery is not properly removed, it may lead to damage to the battery and device, cause personal injury, and/or result in the device being unsafe.
• Samsung does not accept liability for any damage or loss (whether in contract or tort, including negligence) which may arise from failure to precisely follow these warnings and instructions, other than death or personal injury caused by Samsung’s

Copyright

Copyright © 2020 Samsung Electronics Co., Ltd.
This manual is protected under international copyright laws. No part of this manual may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system.

Trademarks

• SAMSUNG and the SAMSUNG logo are registered trademarks of Samsung Electronics , Ltd.
  
• Bluetooth is a registered trademark of Bluetooth SIG, worldwide
• All other trademarks and copyrights are the property of their respective

Model: SM-R180

Rated voltage/current: 5 V / 120 mA (earbuds), 5 V / 500 mA (charging case), 3.7 V (internal battery)

Made in Vietnam by Samsung PO BOX 12987, DUBLIN, IE

 

 

Read More About This Manual & Download PDF: