LG SP7 Wireless Sound Bar Installation Guide

WIRELESS SOUNDBAR
SP7

 Installing and Using the Product

Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download Owner’s Manual. Some of the content in this manual may differ from your product.

https://www.lg.com/global/ajax/common_manual

A Soundbar
B Remote Control Receiver / Status Display
C Wireless Subwoofer – Install it close to the soundbar.
D External Device – (Blu-ray player, game console, etc.)

1. Connect the soundbar to your TV via an optical cable or an HDMI cable.
2. If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the soundbar via an HDMI cable.
3. Connect to power in the following order: wireless subwoofer soundbar. Then, turn on the soundbar. When the connection is automatically established with the soundbar, the LED on the wireless subwoofer will light up in green.
   
4. Using the product with your TV
   1. Press the Function button repeatedly until “OPT/HDMI ARC” appears on the status display.
   2. On your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
   3When the TV is properly connected to the product, “OPT” or “ARC” appears on the status display with a sound.
   5When the TV is properly connected to the product, “OPT” or “ARC” appears on the status display with a sound.
   5.
5. Connecting the product to your smartphone via Bluetooth
   1 Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function.  On)
   2. Press the Bluetooth pair button. After a moment, you will see “BT READY” on the status display.
   3. Find and tap the product on your smartphone. The product appears as “LG SP7 (XX)”.
   4. When the product is connected to your smartphone via Bluetooth, you can see the status display change from “PAIRED” “Connected Bluetooth device name” [“BT”.
   6. Connecting to the LG Sound Bar app
   1. Find and install the LG Sound Bar app on Google Play or App Store from your smartphone.
   2. You can get more information regarding its use by selecting [Help] in [Setting].

If you see a red LED on the back of the wireless subwoofer, it means that the soundbar is not connected to the subwoofer. If this is the case, connect them in the following order.

1. Press the Power button on the sound bar to turn it off.
2. Press the PAIRING button on the back of the disconnected wireless subwoofer. Check if LED blinks green.
   – If you still see a red LED on the back of the wireless subwoofer, press and hold the button on the back of the subwoofer again.
3. Press the Power button on the sound bar to turn it on.
4. When the connection is established, you will see a green LED light on the back of the wireless subwoofer.
   Keep the soundbar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
   .Some speakers may not make sound depend on the input source. Select CINEMA sound mode to listen through all speakers.

• Design and specifications are subject to change without notice.
• Google Play is a trademark of Google LLC.

Specification

Power consumption

• Refer to the main label.

AC adapter

• Model: DA-50F25
• Manufacturer: Asian Power Devices Inc.
• Input: 100 – 240 V ~ 50 – 60 Hz y Output: 25 V 0 2 A
• Model: MS-Z2000R250-050D0-P
• Manufacturer: MOSO POWER SUPPLY TECHNOLOGY CO., LTD.
• Input: 100 – 240 V ~ 50/60 Hz
• Output: 25 V

Dimensions (W x H x D): Approx. 1000.0 mm x 63.0 mm x 105.0 mm Bus Power Supply (USB): 5 V 500 mA Amplifier (Total RMS Output power): 440 W RMS OPEN SOURCE SOFTWARE NOTICE INFORMATION To obtain the source code under GPL, LGPL, MPL, and other open-source licenses, that are contained in this product, please visit https://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers, and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to . This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

POWER: This unit operates on a mains supply of 100 – 240 V ~ 50 – 60 Hz.
Wiring: This unit is supplied with a BS 1363 approved main plug. When replacing the fuse, always use a fuse of the same rating and approved to BS 1362. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer. If the type of plug supplied is not suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions below:
Warning: A mains plug removed from the mains lead of this unit must be destroyed. A mains plug with bared wires is hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or with the earth symbol 6 or colored green or green and yellow. If any other plug is fitted, use the same rating of fuse in the plug.
Important: The wires in this mains lead are colored in accordance with the following codes:
– BLUE: NEUTRAL, BROWN: LIVE – Like the colors of the wires in the mains lead of this unit may not correspond with the colored marking identifying the terminals in your plug, proceed as follows: The wire which is colored blue must be connected to the terminal which is marked with the letter N or colored black. The wire which is colored brown must be connected to the terminal which is marked with the letter L or colored red.

 

www.lg.com