Dell v2.60.60.60 Lifecycle Controller Remote Services User Guide

v2.60.60.60 Lifecycle Controller Remote Services

Dell Lifecycle Controller Remote Services v2.60.60.60
Quick Start Guide
April 2018 Rev. A00

Notes, cautions, and warnings
NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Copyright © 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.

Contents

Chapter 1: Introduction………………………………………………………………………………………………….. 5 Advantages of using Lifecycle Controller………………………………………………………………………………………………………. 5 Benefits of using iDRAC with Lifecycle Controller………………………………………………………………………………………… 6 Key features……………………………………………………………………………………………………………………………………………………..6 New in this release………………………………………………………………………………………………………………………………………….. 6 Advantages of using Lifecycle Controller Remote Services…………………………………………………………………………. 7 Licensable features in Lifecycle Controller……………………………………………………………………………………………………..7 About iDRAC RESTful API with Redfish and Web Service APIs…………………………………………………………………… 7 About Lifecycle Controller API……………………………………………………………………………………………………………………….. 7 About one-to-many management achieved…………………………………………………………………………………………………… 8 Other information that you may need……………………………………………………………………………………………………………. 9 Social Media Reference………………………………………………………………………………………………………………………………9 Accessing documents from the Dell EMC support site………………………………………………………………………………….9 Contacting Dell………………………………………………………………………………………………………………………………………………. 10
Chapter 2: Remote Services Features……………………………………………………………………………….11 Deployment and configuration………………………………………………………………………………………………………………………..11 Server configuration profiles……………………………………………………………………………………………………………………..11 BIOS configuration……………………………………………………………………………………………………………………………………..11 iDRAC configuration………………………………………………………………………………………………………………………………….. 11 RAID configuration……………………………………………………………………………………………………………………………………. 12 NIC configuration……………………………………………………………………………………………………………………………………… 13 Operating system deployment…………………………………………………………………………………………………………………. 13 Near Field Communication using the QuickSync feature……………………………………………………………………….. 13 Configuring advanced security using hash password………………………………………………………………………………14 Configuring USB management port………………………………………………………………………………………………………….14 Monitor…………………………………………………………………………………………………………………………………………………………… 14 Collecting system inventory…………………………………………………………………………………………………………………….. 15 Hardware inventory………………………………………………………………………………………………………………………………….. 15 Lifecycle log……………………………………………………………………………………………………………………………………………….15 System event log……………………………………………………………………………………………………………………………………….16 Firmware inventory…………………………………………………………………………………………………………………………………… 16 Event alerts………………………………………………………………………………………………………………………………………………. 16 SupportAssist Collection………………………………………………………………………………………………………………………….. 16 Out-of-band server performance monitoring…………………………………………………………………………………………..16 Maintain………………………………………………………………………………………………………………………………………………………….. 17 Server configuration profiles–export or import…………………………………………………………………………………….. 17 Firmware update………………………………………………………………………………………………………………………………………..18 Part replacement……………………………………………………………………………………………………………………………………….18 Server profile–export or import………………………………………………………………………………………………………………18 Server license — import………………………………………………………………………………………………………………………….. 19 Provisioning Server……………………………………………………………………………………………………………………………………19 Retire or repurpose the server………………………………………………………………………………………………………………… 19 Managing the web server certificate………………………………………………………………………………………………… 19

Contents

3

Viewing the managed computer system using the Physical Computer System View……………. 20 Job management…………………………………………………………………………………………………………………………………………… 20
Job types………………………………………………………………………………………………………………………………………………….. 20 System status…………………………………………………………………………………………………………………………………………… 21
Chapter 3: Getting started with API collateral and links…………………………………………………….. 22 WSMAN Profiles…………………………………………………………………………………………………………………………………………….22 Lifecycle Controller-related profiles…………………………………………………………………………………………………………22 WSMAN MOF WSDL and XSD API definitions……………………………………………………………………………………………. 25 Managed object file…………………………………………………………………………………………………………………………………..26 Web service description language……………………………………………………………………………………………………………26 XML schema description…………………………………………………………………………………………………………………………. 26 Web services interface guide……………………………………………………………………………………………………………………….. 26 WSMAN Best practices guide……………………………………………………………………………………………………………………….26 Attribute registry XML………………………………………………………………………………………………………………………………….. 27 Event message registry XML…………………………………………………………………………………………………………………………27 XML schemas………………………………………………………………………………………………………………………………………………… 27 Redfish…………………………………………………………………………………………………………………………………………………………… 27 Authorization and licensing requirements for API access…………………………………………………………………………… 27 White papers…………………………………………………………………………………………………………………………………………………. 28 Lifecycle Controller and iDRAC white papers………………………………………………………………………………………….28
Chapter 4: Integrating the Lifecycle Controller API…………………………………………………………… 29 API clients……………………………………………………………………………………………………………………………………………………… 29 Best practices workflow references……………………………………………………………………………………………………………..29 Sample scripts and tools………………………………………………………………………………………………………………………………..29 Applications using Lifecycle Controller-Remote Services……………………………………………………………………………30 WinRM and OpenWSMAN installation and configuration…………………………………………………………………………… 30
Chapter 5: Social media reference………………………………………………………………………………….. 31
Chapter 6: Terms and definitions…………………………………………………………………………………… 32

4

Contents

1
Introduction
Dell Lifecycle Controller provides advanced embedded systems management to perform systems management tasks such as deploy, configure, update, maintain, and diagnose. It is delivered as part of integrated Dell Remote Access Controller (iDRAC) out-of-band solution and embedded Unified Extensible Firmware Interface (UEFI) applications in the latest Dell servers. iDRAC works with the UEFI firmware to access and manage every aspect of the hardware, including component and subsystem management that is beyond the traditional Baseboard Management Controller (BMC) capabilities.
Dell Lifecycle Controller Remote Services further enables remote systems management in a one-to-many method. Remote services is accessible over the network using the secure web services interface and can be programmatically utilized by applications and scripts. Remote services enable management consoles to perform one-to-many bare-metal server provisioning. The combination of the Provisioning Server feature to identify and authenticate the attached Dell system to the network and integration with oneto-many management consoles reduces the manual steps required for server setup and management. The Server Configuration Profiles provide a single view of all the system settings that can be imported and exported from the server to perform one-to-many cloning operations. The interface is aimed at simplifying many tasks, some of which include remotely deploying an operating system, remote update and inventory, and remotely automating the setup and configuration of new and already-deployed Dell systems.
Lifecycle Controller reduces the time and number of steps taken to accomplish tasks, reduces potential for error, enhances server and application uptime and security, and results in more efficient IT management. Developed on the industry standard Unified Extensible Firmware Interface (UEFI) platform, Web Services for Management (WSMAN) interfaces, and Redfish management interfaces, Lifecycle Controller provides an open environment for console integration that also allows custom scripting for Lifecycle Controller. Leading systems management consoles such as, Microsoft System Center Configuration Manager, BMC Software BladeLogic Operations Manager, VMware vCenter have integrated Dell Lifecycle Controller to utilize its features and capabilities to an existing infrastructure, where these consoles are installed.
Topics:
· Advantages of using Lifecycle Controller · Benefits of using iDRAC with Lifecycle Controller · Key features · New in this release · Advantages of using Lifecycle Controller Remote Services · Licensable features in Lifecycle Controller · About iDRAC RESTful API with Redfish and Web Service APIs · About Lifecycle Controller API · About one-to-many management achieved · Other information that you may need · Accessing documents from the Dell EMC support site · Contacting Dell
Advantages of using Lifecycle Controller
The iDRAC with Lifecycle Controller technology in the server’s embedded management allows you to perform useful tasks such as configuring BIOS and hardware settings, deploying operating systems, changing RAID settings, and saving hardware profiles. Together, iDRAC and Lifecycle Controller provide a robust set of management functions that can be used throughout the entire server lifecycle.
Dell Lifecycle Controller simplifies server lifecycle management — from provisioning, deployment, patching and updating to servicing and user customization — both locally and remotely. Lifecycle Controller includes managed and persistent storage that embeds systems management features and Operating System device drivers directly on the server. This eliminates the media-based system management tools and utilities traditionally needed for systems management.

Introduction

5

Benefits of using iDRAC with Lifecycle Controller
The benefits include: Increased Uptime — Early notification of potential or actual failures that help prevent a server failure or reduce recovery
time after a failure. Improved Productivity and Lower Total Cost of Ownership (TCO) — Extending the reach of administrators to larger
numbers of distant servers can make IT staff more productive while driving down operational costs such as travel. Enhanced Security– By providing secure access to remote servers, administrators can perform critical management
functions while maintaining server and network security. Increased Efficiency– With Lifecycle Controller Remote Services, you can automate the server configuration management
using Dell OpenManage Essentials and Dell partner consoles, which enables efficient administration as server deployments scale.
For more information about iDRAC, see the Integrated Dell Remote Access Controller User’s Guide available at www.dell.com/ esmmanuals
Key features
You can perform the following systems management tasks using Lifecycle Controller-Remote Services: Install operating systems and drivers Manage licensing Perform server firmware update including BIOS, iDRAC/LC, backplane and enclosure controllers, RAID, NIC/CNA, Fibre
Channel host bus adapters, PCIe SSDs, SAS HDDs and SSDs, and SATA HDD Part Replacement and automatic restore of server configuration Get hardware inventory information Get and set NIC/CNA, Fibre Channel host bus adapters (FC-HBA), PCIe SSDs, and RAID configuration Get and set BIOS configuration and BIOS passwords Full export of Lifecycle log and add work notes Export current- and factory-shipped hardware inventory log Manage, attach, and boot to vFlash SD card partitions Lock the controllers using the local key Export and import the server profile Import server license View firmware details during server update Export and import Server Configuration Profiles Schedule and track the status of the update and configuration Import and export Server Configuration Profiles file that contains information about a component configuration Out-of-band server performance monitoring Enhance security using hash password View logs, monitoring, and server information, and configure the network parameters of a server using a mobile device Delete server-related information View the managed system using Physical Computer System View Manage the web server certificate Configure the USB management port View SupportAssist Collection to resolve business-critical issues Replace motherboard using Import Server Profile feature
New in this release
The updates supported in this release are:
Added support for OS deployment through bootable USB device. Added support for HBA330 on FD332 storage sled. Added support for SMBv2 replacing the deprecated SMBv1/CIFS.

6

Introduction

Added support to configure RAID for setting the boot VD, change PD state (force offline/online), change persistent hot spare setting, replace VD physical disk, and unlock secure foreign configuration.
Advantages of using Lifecycle Controller Remote Services
When Dell examined the most common management tasks and the inefficiencies associated with them, it discovered that the additional time taken for performing management tasks was not because of the tools, but it was because of how the functions were split between several tools. For example, the most common tasks such as provisioning, deploying, and updating required not only multiple tools and multiple media format, but also searching the Web for tools such as drivers and firmware. This traditional delivery model resulted in inefficient use of time, potential errors, and possible security risks. Lifecycle ControllerRemote Services addresses all these system management issues.
Licensable features in Lifecycle Controller
The Web Services-Management (WS-MAN) License and Privilege Specification encompasses all the license and privilege information required to utilize the WS-MAN API provided by the integrated Dell Remote Access Controller (iDRAC) with Lifecycle Controller. It was delivered as part of the iDRAC (Express and Enterprise licenses, and vFlash SD card feature) starting with the 11th generation of Dell PowerEdge servers. On 12th and 13th generation of PowerEdge servers, the vFlash feature is included with the iDRAC Enterprise license, so you need not separately license vFlash with Lifecycle Controller 2.0 and later. The 12th and 13th generation of PowerEdge servers of Dell use only Express or Enterprise licensing.
The Lifecycle Controller management capabilities are partitioned into distinct areas and represented by the Dell Common Information Model (DCIM) profile specifications that provide comprehensive details about each manageability feature or capability. These features may be free, partially licensed, or fully licensed. Also, the accessibility of a feature is defined by the credentials provided with the WS-MAN request and maps to the user-assigned privilege credentials, such as administratoror read-only access.
About iDRAC RESTful API with Redfish and Web Service APIs
Web Services-Management (WSMan) is a Distributed Management Task Force’s (DMTF) open standard, defining a Simple Object Access Protocol (SOAP)–based protocol for managing servers, devices, applications, and various Web Services. WSMAN provides a common way for systems to access and exchange management information across the IT infrastructure.
DMTF is an industry organization that develops, maintains, and promotes standards for systems management in enterprise IT environments. The DMTF data model is complex and typically requires multiple transactions to accomplish simple operations such as specifying a user name and password, or giving administrator privileges to a user account. To reduce the number of transactions, Lifecycle Controller also offers a Dell data model for management that is based on an attribute model.
The iDRAC RESTful API expands upon the DMTF Redfish standard with Dell EMC-specific operations. It includes RESTful server configuration, modular server feature support, and detailed OS networking inventory and status. The Scalable Platforms Management Forum (SPMF) has published the Distributed Management Task Force (DMTF)’s Redfish API. It is an open industry standard specification and schema which is designed to meet the needs of IT administrators for simple, modern, and secure management of scalable platform hardware. Redfish is a NextGen management standard using a data model representation inside a hypermedia RESTful interface. The data model is defined in terms of a standard and machine-readable schema, with the payload of the messages expressed in JSON and the protocol using OData v4. Redfish is a hypermedia API, and can represent various implementations using a consistent interface. It has mechanisms for discovering and managing data center resources, handling events, and managing long-lived tasks.
About Lifecycle Controller API
Lifecycle Controller-Remote Services is a standards-based interface that enables consoles to integrate, for example, bare-metal provisioning and one-to-many operating system deployments for remotely located servers. Dell’s Lifecycle Controller takes

Introduction

7

advantage of the capabilities of both Lifecycle Controller GUI and Lifecycle Controller-Remote Services to deliver significant improvement and simplification of server deployment.
Lifecycle controller also supports local one-to-one system management tasks through a graphical user interface (GUI) using the server’s KVM or the Virtual Console in iDRAC for operating system installation, updates, configuration, and for running diagnostics on single and local servers. This eliminates the need for multiple option ROMs for hardware configuration. For more information, see Lifecycle Controller User’s Guide, available at www.delltechcenter.com/lc.
Lifecycle Controller-Remote Services features are available based on the type of license (that is, Basic Management, iDRAC Express, iDRAC Express for Blades, or iDRAC Enterprise) you purchase. Only licensed features are available in the iDRAC web interface and Lifecycle Controller-Remote Services. For more information about managing licenses, see iDRAC User’s Guide. For more information about Lifecycle Controller-Remote Services licensing, see Licensing.
About one-to-many management achieved
A management station sends WS-MAN and iDRAC RESTful API with Redfish commands over a network and these commands pass securely through the network from outside the firewall and maintain security.

8

Introduction

Other information that you may need
In addition to this guide, you can refer the following guides available at dell.com/support/home or dell.com/idracmanuals:
The Lifecycle Controller Online Help provides information about the fields available on the GUI and the descriptions for the same. To view the online help information in Lifecycle Controller user interface, click Help in the upper-right corner, or press <F1>.
The Lifecycle Controller Release Notes is available with the product. To read the Release Notes in Lifecycle Controller user interface, click About , and then click View Release Notes. A web version is also given to provide last-minute updates to the system or documentation or advanced technical reference material intended for users or technicians.
The Dell iDRAC Licensing White paper at www.delltechcenter.com. This document provides an overview of iDRAC digital licensing and how the latest licensing is different from iDRAC available in the Dell PowerEdge servers. The white paper also provides information on iDRAC Express and other Enterprise value offerings.
The Dell Lifecycle Controller Remote Services For Dell PowerEdge Servers Quick Start Guide provides information about using remote services.
The Systems Management Overview Guide provides brief information about the various Dell software available for performing systems management tasks.
The Integrated Dell Remote Access Controller (iDRAC) User’s Guide provides information about configuring and using iDRAC for rack, tower, and blade servers to remotely manage and monitor a system and the system’s shared resources through a network.
The Dell Repository Manager User’s Guide provides information about creating customized bundles and repositories comprised of Dell Update Packages (DUPs) for systems running supported Microsoft Windows operating systems.
The “Lifecycle Controller Supported Dell Systems and Operating Systems” section in the Dell Systems Software Support Matrix provides the list of Dell systems and operating systems that you can deploy on target systems.
The Dell PowerEdge RAID Controller (PERC) 9 User’s Guide provides specification and configuration-related information about the PERC 9 controllers.
The Glossary provides information about the terms used in this document. The Dell OpenManage Server Update Utility User’s Guide provides information about using the DVD-based application for
identifying and applying updates to the system.
The following system documents are available to provide more information:
The safety instructions that are included with a system provide important safety and regulatory information. For additional regulatory information, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Warranty information may be included within this document or as a separate document.
The Rack Installation Instructions included with a rack solution describe how to install a system into a rack. The Getting Started Guide provides an overview of system features, setting up the system, and technical specifications. The Owner’s Manual provides information about system features and describes how to troubleshoot the system and install
or replace system components. Lifecycle Controller Web Services Interface Guide­Windows and Linux.
Social Media Reference
To know more about the product, best practices, and information about Dell solutions and services, you can access the social media platforms such as Dell TechCenter and YouTube. You can access blogs, forums, white papers, how-to videos, and so on from the Lifecycle Controller wiki page at www.delltechcenter.com/lc.
For Lifecycle Controller documents and other related firmware documents, see www.delltechcenter.com.
Accessing documents from the Dell EMC support site
You can access the required documents using the following links: For Dell EMC Enterprise Systems Management documents — www.dell.com/SoftwareSecurityManuals For Dell EMC OpenManage documents — www.dell.com/OpenManageManuals For Dell EMC Remote Enterprise Systems Management documents — www.dell.com/esmmanuals For iDRAC and Dell EMC Lifecycle Controller documents — www.dell.com/idracmanuals For Dell EMC OpenManage Connections Enterprise Systems Management documents — www.dell.com/
OMConnectionsEnterpriseSystemsManagement For Dell EMC Serviceability Tools documents — www.dell.com/ServiceabilityTools

Introduction

9

1. Go to www.dell.com/Support/Home. 2. Click Choose from all products.
3. From All products section, click Software & Security, and then click the required link from the following: Enterprise Systems Management Remote Enterprise Systems Management Serviceability Tools Dell Client Command Suite Connections Client Systems Management
4. To view a document, click the required product version.
Using search engines: Type the name and version of the document in the search box.
Contacting Dell
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1. Go to Dell.com/support. 2. Select your support category. 3. Verify your country or region in the Choose a Country/Region drop-down list at the bottom of the page. 4. Select the appropriate service or support link based on your need.

10

Introduction

2
Remote Services Features
Using Lifecycle Controller-Remote Services, you can perform the following operations: Deploy and Configure Monitor Maintain Create and schedule jobs
Topics:
· Deployment and configuration · Monitor · Maintain · Job management
Deployment and configuration
Using various Lifecycle Controller-Remote Services’ capabilities, you can perform different configurations on a system throughout its lifecycle. You can perform operations such as BIOS, iDRAC, RAID, FC-HBA, and NIC configurations, and operating system deployment on the system.
Server configuration profiles
The server configuration profiles file contains the component configuration information that is used to apply the configuration for BIOS, iDRAC, RAID, NIC, FC-HBA, System, and Lifecycle Controller by importing the file to a target system. The export and import of Server Configuration Profiles are supported by the WS-MAN and iDRAC RESTful API with Redfish APIs. For more information and white papers, see Server Cloning with Server Configuration Profiles and Creating and Managing Server Configuration Profiles documents available at www.delltechcenter.com.
BIOS configuration
The BIOS and boot configuration feature gets and sets any of the configurable BIOS attributes that are exposed in BIOS UEFI HII. You can perform the following operations: Retrieve current configuration of BIOS inventory Retrieve current boot configuration settings Manage the boot order configuration Change the BIOS boot mode or UEFI boot mode Manage BIOS passwords Change the boot order Enable or disable boot sources One-time boot support to any device listed in the boot order
iDRAC configuration
The iDRAC configuration feature is used to manage the properties and interfaces for running system management tasks related to the management of basic properties of iDRAC. The remote access controller properties and attributes are divided into views to provide a simple methodology for the clients to query the iDRAC views and set the iDRAC attributes. You can perform the following operations:

Remote Services Features

11

Retrieve current iDRAC configuration and inventory Get and set any configurable iDRAC attribute Manage iDRAC user accounts
RAID configuration
The RAID configuration feature is used to manage the properties and capabilities of the RAID storage. The RAID storage is modeled using a collection of attributes, where there are collections for the enclosures, storage adapters, logical disks, physical disk drives, and PCIeSSD devices. Also, there is a configuration service that contains all the methods used to configure the RAID storage.
You can perform the following operations: Setting the boot VD Change PD state (force offline/online) Change persistent hot spare setting Replace VD physical disk Unlock secure foreign configuration Perform prepare to remove method for PCIe SSD drives. Perform secure erase method for PCIe SSD devices and SED drives. Clear preserve cache. Expand the online capacity. Migrate the RAID level. Set external enclosure asset tag / name. Cancel rebuild physical disk. Retrieve current configuration of RAID inventory. Delete all virtual disks and unassign all the hot spare physical disk drives. Prepare any foreign physical disk drives for inclusion in the local configuration. Manage hot spares (assign / unassign global and dedicated). Manage keys for self-encrypting drives. Manage virtual disks. You can perform the following:
Create a single virtual disk. After the virtual disk is created, the FQDD of the virtual disk changes.
Initialize (fast or slow) the virtual disk using the physical disk drives attached to the PERC controller.
Delete a virtual disk from the PERC controller.
Configure the following RAID attributes: Virtual disks–Read Policy, Write Policy, and Disk Cache Policy
Controllers–Background Initialization Rate, Check Consistency Mode, Check Consistency Rate, Copy Back Mode, Possible load balance modes, Patrol Read Mode, Rebuild Rate, and Reconstruction Rate.
Change RAID-ready states of the physical disk drives. View PCIeSSD and extended card information. Reset PERC controller configuration. Import foreign configurations such that virtual disks are not lost after moving physical disks. The controllers provide support
for auto import of foreign configuration. Clear foreign configuration on physical disk drives attached to a controller. Set patrol read mode to avoid disk failures and data loss or corruption. Check the consistency of the redundancy information for redundant virtual disks. Cancel the check consistency operation that is in progress on a virtual disk. Blink or unblink the LEDs on the physical disk drives included in the virtual disk. Create, change, or delete the security key using the Local Key Management (LKM) feature on controllers that support
encryption of the drives.
NOTE: On Dell’s 13th generation PowerEdge server, you can now perform all RAID configuration jobs in real time without rebooting the host.
For more information on RAID configuration, see the SimpleRaid profile document available at en.community.dell.com/ techcenter/systems-management/w/wiki/1906.dcim-library-profile.aspx. Also, see the iDRAC User’s Guide available at www.dell.com/esmmanuals.

12

Remote Services Features

NIC configuration
Network Interface Controller (NIC) configuration feature is used to set up or modify configuration settings for supported NIC cards (for example, Intel, QLogic, and Broadcom). These configuration settings can be set or updated both locally and remotely using Lifecycle Controller-Remote Services.
The NICs supported by Lifecycle Controller provide an array of networking features converged into a single controller: Traditional NIC capabilities Internet Small Computer System Interface over Ethernet (iSCSI) capabilities Fibre Channel over Ethernet (FCoE) capabilities You can configure various device capabilities such as: Personalities (FCoE, ISOE, Layer 2 NIC) NIC partition bandwidth allocation Boot versus Offload I/O Identity
Operating system deployment
The operating system deployment feature is used to remotely deploy an operating system using WSMAN web services protocols that use CIFS and NFS network file sharing protocols. Remote activation of locally exposed embedded drivers such as a USB drive eliminates the need for physical media.
NOTE: By default the drivers are available with iDRAC and Lifecycle Controller for all the Dell supported operating systems.
You can perform the following operations:
Get installed driver pack version and list of supported operating systems. Expose embedded OS deployment drivers for a selected operating system remotely. The drivers are attached to the server
on an emulated USB device. Remote acquisition of embedded drivers for the selected operating system to a CIFS or NFS network share that can be used
later for operating system deployment. Boot to an ISO image on a CIFS or NFS network share to initiate an operating system installation. Download ISO to vFlash SD card and boot from the card to initiate an operating system installation. Connect an ISO from CIFS or NFS network share, attaching it as virtual USB CD-ROM device to the server, and booting the
server to the ISO, every time the server restarts. One time boot to PXE. One time boot to hard disk. Get the list of MAC addresses of all supported NICs present on the server. Deploy operating system on iSCSI and FCoE LUN.
Near Field Communication using the QuickSync feature
Using the QuickSync feature, you can: View basic server information such as Service Tag, MAC address, NIC data, firmware versions, operating system, and so on.
View log and monitoring information of a server.
Configure network parameters of a server.
After viewing or editing the information, you can troubleshoot or configure using a mobile device. To use this feature, you must install the OpenManage Mobile (OMM) software application on your mobile device and enable the bezel on the server. The QuickSync feature enables your mobile device to act as a proximity reader which reads data on the server when held at a distance of less than 20 mm from the server front panel. You can perform most of the tasks that you complete by using an LCD panel. The system information is the basic hardware inventory information retrieved from NFC. The attributes allow you to set the access, check the presence of QuickSync feature, enable or disable the Inactivity Timer, set the inactivity timeout value.
NOTE: This feature is supported only on Android mobile devices.

Remote Services Features

13

For more information on the QuickSync feature, see the System QuickSync profile document available at en.community.dell.com/techcenter/systems-management/w/wiki/1906.dcim-library-profile.aspx. Also, see iDRAC User’s Guide available at www.dell.com/esmmanuals.
Configuring advanced security using hash password
You can set user passwords and BIOS passwords using a one-way hash format in iDRAC available on the 13th generation Dell PowerEdge servers. The user authentication mechanism is not affected (except for SNMPv3 and IPMI) and you can provide the password in plain text format. With the new password hash feature, you can: Generate your own SHA256 hashes to set iDRAC user passwords and BIOS passwords. New attributes are created to
represent the hash representation of the password. Export the Server Configuration Profiles file with the password that has the hash values. Use the
ExportSystemConfiguration method and include the password hash values that should be exported to the IncludeInExport parameter. The hash password can be generated with and without Salt using SHA256. Whether the Salt string is used or null, it should always be set along with the SHA256SystemPassword.
NOTE: If the iDRAC user account’s password is set with the SHA256 password hash (SHA256Password) only and not the other hashes (SHA1v3Key, MD5v3Key), authentication through SNMPv3 is lost. Authentication through IPMI is always lost when hash is used to set the user account’s password.
For more information on using hash password, see the iDRAC Card and BIOS and BootManagement profile documents available at en.community.dell.com/techcenter/systems-management/w/wiki/1906.dcim-library-profile.aspx.
Configuring USB management port
On the 13th generation of PowerEdge servers monitored by iDRAC, you can perform the following functions on a USB port and USB drive: Manage the status of the server’s USB management port. If the status is disabled, iDRAC does not process a USB device or
host connected to the managed USB port.
Configure the USB Management Port Mode to determine whether the USB port is used by iDRAC or the operating system. View the overcurrent alert generated when a device exceeds the power requirement permitted by USB specification.
Configure the overcurrent alert to generate the WS-Events.
View the inventory of the USB device such as FQDD, device description, protocol, vendor ID, product ID, and so on, when the device is connected.
Configure a server by using files stored on a USB drive that is inserted in to a USB port, which is monitored by an iDRAC. This configuration allows creation of a job to track progress and logging the results in the Lifecycle log. The rules for discovering the Server Configuration profile and naming are the same as DHCP provisioning. For more information, see en.community.dell.com/techcenter/extras/m/white_papers.
NOTE: The USB configuration setting controls whether the configuration of the system is allowed from a USB drive. The default setting only applies the configuration from the USB when the iDRAC user password and BIOS are still default.
For more information about the USB device management, see the USB device profile document available at en.community.dell.com/techcenter/systems-management/w/wiki/1906.dcim-library-profile.aspx.
Monitor
Using various Lifecycle Controller-Remote Services capabilities, you can monitor a system throughout its lifecycle. Current and factory-shipped hardware inventory, Lifecycle Log, System Event Log, Firmware Inventory are some of the features that help you monitor the system.

14

Remote Services Features

Collecting system inventory
When Collect System Inventory On Restart (CSIOR) is set to enabled, Lifecycle Controller performs an inventory and collects the configuration information for all hardware on every system restart. Also, the system inventory collection also detects any changes in hardware. If the Part Replacement feature is enabled and CSIOR detects that the managed hardware is replaced, Lifecycle Controller restores the previous configuration and firmware on the newly installed device based on the inventory collected during the previous system restart.
The CSIOR setting is enabled by default and it can be disabled locally by using Lifecycle Controller or remotely with RACADM, WS-MAN, or iDRAC RESTful API with Redfish. You can change the settings to one of the following: Enable–Hardware inventory and configuration information is collected on every system restart. Collecting system inventory
may affect the boot time depending on the hardware present in the system. Disable–Hardware inventory and configuration information is not collected on every system restart. The usage of many
features depends on the inventory information updates. Features such as Easy Restore and Part Replacement may not contain the latest information when CSIOR is disabled. In-band tools such as OMSA and DTK cannot configure BIOS when CSIOR is disabled. Also, system information reported from out-of-band interfaces such as WS-MAN, iDRAC RESTful API with Redfish, and RACADM may not have correct information.
Hardware inventory
The hardware inventory information is cached on the persistent storage of Lifecycle Controller and is available to iDRAC and UEFI applications. It is used to export the hardware inventory from Lifecycle Controller to a text file on a remote share.
You can remotely query the inventory of hardware components. Each hardware inventory class contains important attributes about the hardware components.
For example, the LastSystemInventoryTime attribute identifies the last time a Collect System Inventory on Restart (CSIOR) was run. It is an important attribute as it indicates how recently the inventory was updated.
Hardware inventory and configuration information is available for the following components: Power Supply Unit Fan Memory CPU iDRAC PCI Device Video Card vFlash SD Card NIC RAID BIOS System Sensor
Lifecycle log
Lifecycle logs contain entries for configuration and firmware updates of BIOS, Storage Controllers, LOMs, and add-in NIC cards, if supported. The Lifecycle log can be exported to a network share or saved to a USB drive. The Lifecycle Log is accessible through the iDRAC web interface, RACADM iDRAC RESTful API with Redfish, and WS-MAN interface.
The Lifecycle log provides the following information: iDRAC, BIOS, NIC, and RAID configuration change Logs of all the remote operations Firmware update history based on device, version, and date Error message IDs Host power events or reboots POST errors User login to any iDRAC interface For more information about Event and Error Messages, see the Dell Event Message Reference Guide available at www.dell.com/ support/manuals

Remote Services Features

15

System event log
The Lifecycle Log contains events related to system, storage devices, network devices, firmware updates, configuration changes, license messages, and so on. However, the system events are also available as a separate log called the System Event Log (SEL). When a system event occurs on a managed system, it is recorded in the SEL. The same SEL entries are also available in the Lifecycle Log.
Firmware inventory
Lifecycle Controller-Remote Services provide information about each of the component firmware installed on the target system and the available firmware images are cached in the Lifecycle Controller. Additional information contained in the available properties is: Firmware type Installed and previous (rolled back) firmware versions Installation date Vendor IDs Revision number
NOTE: Configuration changes and firmware updates made within the operating system may not be properly reflected in inventory until a server restart is performed.
Event alerts
Alerts and actions can be set for certain events that occur on a managed system. An event occurs when the status of a system component has changed to the predefined condition. If an event matches an event filter and this filter is configured to generate an alert (email, SNMP trap, or IPMI alert), an alert is sent to one or more configured destinations. If the same event filter is also configured to perform an action (such as reboot, power cycle, or power off the system), the action is performed. You can set only one action for an event.
SupportAssist Collection
SupportAssist Collection is used to provide information about health report of hardware, Operating System (OS), and software applications installed on a server. This feature includes application information collected by Dell System E-Support Tool (DSET). This report is used by administrators to resolve business-critical issues. Examples of data collected in the SupportAssist Collection are: Hardware inventory Information on the server, Lifecycle Controller, and its components BIOS order boot information Lifecycle Controller log entries Firmware-related information vFlash SD Card partition information TTY logs for PERC controllers and NVMe PCIe SSD drives
NOTE: The Tech Support Report feature is renamed as SupportAssist Collection in the iDRAC web interface. This feature is still referred as Embedded Tech Support Report in the RACADM and WS-MAN interfaces.
Out-of-band server performance monitoring
Using this feature, you can monitor the performance index of CPU, memory, and I/O. Intel ME supports Compute Usage Per Second (CUPS) functionality for monitoring the performance. The monitoring is independent of the OS and does not use CPU resources. The Intel ME displays a platform CUPS sensor that provides the computation, memory and I/O resource utilization value in the form of a platform CUPS Index. iDRAC monitors this CUPS index for overall system utilization and also the instant value of CPU, Memory, and I/O utilization index.

16

Remote Services Features

NOTE: To use this feature, iDRAC enterprise license is required.
For more information about monitoring the out-of-band performance, see the Dell Base Metrics Profile and Dell Sensors Profile document available at www.delltechcenter.com/systemsmanagement.
Maintain
Using various Lifecycle Controller-Remote Services capabilities, you can maintain the health of a system throughout its lifecycle. You can use features such as remote firmware management, part replacement, server profile import or export, and provisioning server to maintain a system using Lifecycle Controller-Remote Services.
Server configuration profiles–export or