Honeywell HE220, HE260 Humidifier Installation Kit Installation Guide
Honeywell HE220, HE260 Humidifier Installation Kit
APPLICATION
This installation kit contains all the parts necessary to install your new Honeywell HE220 or HE260 Humidifier
INSTALLATION
Please see www.yourhome.honeywell.com for complete installation instructions and owner’s manual.
Preparing for the Installation
Be sure to identify all the required (Table 1) accessories (included) and make sure the appropriate tools are available before beginning the installation.
Included Accessories
Table 1. Included Accessories
Quantity | Accessory |
6 ft (1.85M) | Bypass ducting including: 6 in. (155 mm) diameter flexible duct Starter collar Summer shut-off damper Duct tape |
20 ft (6.2m) | 18 gauge, two-strand thermostat wire |
20 ft (6.2m) | 1/4 in. (6.35 mm) OD feed water tubing |
10ft(3.1m) | 1/2 in (12.7 mm) ID drain tubing |
1 bag | Connecting and mounting hardware: Wire nuts (4) No. 8 sheet metal screws (18) Drain tube clamps (2 sizes) Feed tube mounting clamps (6) Brass inserts (2) Plastic compression rings (2) |
Required Tools
Tools required for installation include:
- Tin snip.
- Screwdriver.
- Adjustable or open-end wrench.
- Drill, punch or awl.
- Level.
Automation and Control Solutions
Honeywell International Inc. 1985 Douglas Drive North Golden Valley, MN 55422 customer.honeywell.com
® U.S. Registered Trademark
© 2011 Honeywell International Inc.
69-2633ES—03 M.S. Rev. 07-11 Printed in U.S.A
Was this manual helpful?
Thank you for your feedback!