KitchenAid KEK1025 Precision Gooseneck Electric Kettle Owner’s Manual

KEK1025

PARTS AND FEATURES

PARTS AND ACCESSORIES

PRECISION KETTLE SAFETY

Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word ‘DANGER’ or ‘WARNING.” These words mean:

DANGER You can be killed or seriously injured If you don’t Immediately follow the Instructions.
DANGER You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

  1. Read all instructions.
  2. Do not touch hot surfaces. Use handles.
  3. To protect against fire, electrical shock, and injury to persons do not immerse base, cord, plug, or the Precision Kettle in water or other liquids.
  4. Use close supervision when using the Precision Kettle near or by children.
  5. Unplug the Precision Kettle from the outlet when not in use and before cleaning.
    Allow cooling before putting on or taking off parts and before cleaning the appliance.
  6. Do not operate the Precision Kettle with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest Authorized Service Center for examination, repair, or adjustment.
  7. Use of replacement parts or accessory attachments not recommended by the manufacturer may result in fire, shock, or injury to persons.
  8. Do not use outdoors.
  9. Do not let cord hang over counter or table edges, or allow to come into contact with heated surfaces.
    PRECISION KETTLE SAFETY
  10. Do not place on or near a hot gas or electric burner, or in a heated oven.
  11. The Precision Kettle should only be used to heat water.
  12. Do not use the Precision Kettle without the lid properly closed.
  13. Do not use the Precision Kettle with a loose or weakened handle. 1
  14. Do not use the appliance for other than intended use.
  15. Do not clean the Precision Kettle with abrasive cleaners, steel wool, or other abrasive materials.
  16. Do not overfill the Precision Kettle.
  17. Scalding may occur if the lid is removed during the heating cycle.
  18. To disconnect, turn the control to “off,” then remove the plug from the wall outlet.

SAVE THESE INSTRUCTIONS
This product is designed for household use only.

ELECTRICAL REQUIREMENTS
 WARNING
Electrical Shock Hazard Plug into a grounded 3 prong outlet.
Do not remove the ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.

Voltage: 120 VAC
Frequency: 60 Hz
Wattage: 1000 W

NOTE: The Precision Kettle has a 3 prong grounded plug. To reduce the risk of electrical shock, this plug will fit in an outlet only one way. If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plugin anyway.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.
A short power-supply cord (or detachable power-supply cord) should be used to reduce the risk resulting from becoming entangled in or tripping over a longer cord.

USING THE PRECISION KETTLE

PREPARING THE PRECISION KETTLE FOR USE
Before first use
Before using your Precision Kettle for the first time, wash the kettle and all accessories, including the lid, in warm, soapy water, then rinse with clean water and dry. Fill the Precision Kettle with water to the “Max” fill line (see example below) and run one cycle at the maximum temperature. To avoid damage, do not fully immerse the Precision Kettle in water, and do not use abrasive cleaners or scouring pads.
NOTE: The entire Precision Kettle is hand wash only. To avoid damage, do not wash any part of the Precision Kettle, its accessories, or the base with a power cord in a dishwasher.

Fill the Precision Kettle with water to the “Max” fill line inside the kettle.
WARNING
Electrical Shock Hazard Plug into a grounded 3 prong outlet.
Do not remove the ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
IMPORTANT: Be sure that the vent holes at the top of the kettle are clean and free of obstructions, or the Precision Kettle may overflow.

  1. Place the base with the power cord on a flat, sturdy surface and plug it into a 3 prong grounded outlet.

FOR DETAILED INFORMATION ON USING THE PRECISION KETTLE
Visit kitchenaid.com/quickstart for additional instructions with videos and tips on how to use your Precision Kettle.
BREW/STEEP TEMPERATURE SUGGESTIONS
The KitchenAid® Precision Kettle allows you to confidently pour with precision.
It features the industry-standard 1-liter capacity carafe. The gooseneck spout and three unique flow rate settings deliver precise and consistent pour control for a pour-over, tea, or beverage of choice.
A brew-range thermometer is displayed in the lid to keep track of your water temperature while you pour so you know you are within your preferred brewing range.
NOTE: The Precision Kettle is designed for water only. Do not put any other liquids or substances in the Precision Kettle.

BEVERAGE  Coffee Green Tea White Tea Oolong Tea Black Tea Herbal Tea
SUGGESTED TEMPERATURE (C°/F°) 92-96° 80° 85° 90° 95° 100°
196-205° 176° 185° 194° 203° 212°
SUGGESTED BREW/
STEEP TIME (MINUTES)		 5-Mar 3-Jan 5-Mar 5-Mar 5-Apr 7-May

The above suggestions are points of reference. KitchenAid recommends that you experiment with temperature and brew/steep times to find the perfect formula for your preferred cup of coffee or tea.
For easy reference, the suggested temperature range for brewing coffee is shown in red on the built-in thermometer.

ALTITUDE BOILING POINT REFERENCE GUIDE
This chart shows the boiling point of water at different altitudes. Please refer to this chart when using the Precision Kettle and be aware of the boiling point in your particular area.

BOILING POINT °C/°F
*Elevation is shown in feet above sea level.

CHANGING THE FLOW CONTROL

TIP: Prior to first use, fill the Precision Kettle with room temperature water and pour at each flow control setting to become familiar with the different flow rates.

  1. Your Precision Kettle has 3 flow control settings. The flow control lever inside the kettle is used to change the settings.
  2. Push the lever down for more restricted flow; pull the lever up for less restricted flow.

NOTE: After heating water, be sure to empty the Precision Kettle and allow it to cool completely before changing the flow rate settings.
TIP: The flow control lever is meant to come out for cleaning. If you pull up too far while changing the flow rate settings and the lever comes out, it can easily slide back into place.
FILLING THE PRECISION KETTLE WITH WATER

  1. Remove the lid from the Precision Kettle and fill it with water.
  2. Replace the lid and put the Precision Kettle back on the base.

NOTE: There must be a minimum of 1 cup (.25 L) of water for the Precision Kettle to operate. Do not fill past the “Max” fill line of 1 quart (1 L).

OPERATING THE PRECISION KETTLE

  1. When placed on the base, turn the Precision Kettle on by pressing the switch down. The LED indicator will light up.
  2. The Dry Boil Protection feature will turn the Precision Kettle off automatically once the water has reached the boiling point.
    IMPORTANT: Please see the “Altitude boiling point reference guide” for peak boiling temperature at your altitude. If using the Precision Kettle at higher altitudes, the Precision Kettle will boil continuously at a lower temperature until all the water has evaporated. The kettle will need to be manually turned off.
  3. You may also manually turn off the Precision Kettle by flipping the switches up to the off position or by removing the Precision Kettle from the base.
    NOTE: Unplug the Precision Kettle when not in use.

    4. FOR DETAILED INFORMATION ON USING THE PRECISION KETTLE
    Visit kitchenaid.com/quickstart for additional instructions with videos and tips on how to use your Precision Kettle.

    CARE AND CLEANING

    CLEANING THE EXTERIOR
    IMPORTANT: Before cleaning, be sure to unplug the Precision Kettle from the electrical outlet. Make sure the Precision Kettle has cooled completely.

    The exterior of the Precision Kettle may be cleaned with a damp cloth. Dry and polish the Precision Kettle with a soft cloth. Abrasives and scouring agents of any kind are not recommended.
    REMOVING MINERAL DEPOSITS FROM THE INTERIOR
    To get the best performance from your Precision Kettle, decalcification will be necessary. Calcium deposits may form on the interior of the Precision Kettle. The cleaning interval will depend on the hardness of the water you put in the Precision Kettle.

    IMPORTANT: Be sure that the vent holes at the top of the kettle are clean and free of obstructions, or the Precision Kettle may overflow.

    1. Fill the Precision Kettle with 1 cup (.25 L) of white vinegar and 3 cups (.75 L) of water. Boil and allow to stand overnight.
    2. Empty the solution from the Precision Kettle.
    3. Fill the Precision Kettle with water, bring it to a boil, and drain out the water. Complete this step twice. The Precision Kettle is now ready to use.

      4. NOTE: If desired, the flow control lever and built-in thermometer can be removed for further cleaning. FOR DETAILED INFORMATION ON CLEANING THE PRECISION KETTLE
      Visit kitchenaid.com/quickstart for additional instructions with videos and tips on how to use your Precision Kettle.

      WARRANTY AND SERVICE

      KITCHENAID® PRECISION KETTLE WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA, PUERTO RICO, AND CANADA
      This warranty extends to the purchaser and any succeeding owner for Precision Kettles operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada.

      Length of Warranty:

      One Year Full Warranty from date of purchase.

      KitchenAid Will Pay
      for Your Choice of:

      		 Hassle-Free Replacement of your Precision Kettle.
      See the next page for details on how to arrange for service, or call the Customer eXperience Center toll-free at 1-800-541-6390. OR The replacement parts and repair labor costs to correct
      defects in materials and workmanship. Service must be provided by an Authorized KitchenAid Service Center.

      KitchenAid Will
      Not Pay for:

      		 A. Repairs when your Precision Kettle is used in other than normal single-family home use.
      B. Damage resulting from accident, alteration, misuse, or abuse.
      C. Any shipping or handling costs to deliver your Precision Kettle to an Authorized Service Center.
      D. Replacement parts or repair labor costs for Precision Kettles operated outside the 50 United States, District of Columbia, Puerto Rico, and Canada.

      DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
      IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
      IF THIS PRODUCT FAILS TO WORK AS WARRANTED, THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.
      HASSLE-FREE REPLACEMENT WARRANTY–50 UNITED STATES, DISTRICT OF COLUMBIA, AND PUERTO RICO
      We’re so confident the quality of our products meets the exacting standards of KitchenAid that, if your Precision Kettle should fail within the first year of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Precision Kettle returned to us. Your replacement unit will also be covered by our one-year limited warranty. If your Precision Kettle should fail within the first year of ownership, simply call our
      toll-free Customer eXperience Center at 1-800-541-6390 Monday through Friday. Please have your original sales receipt available when you call. Proof of purchase will be required to initiate the claim. Give the consultant your complete shipping address (no P.O. box numbers, please).
      When you receive your replacement Precision Kettle, use the carton, packing materials, and prepaid shipping label to pack up your original Precision Kettle and send it back to KitchenAid.
      HASSLE-FREE REPLACEMENT WARRANTY–CANADA
      We’re so confident the quality of our products meets the exacting standards of the KitchenAid brand that, if your Precision Kettle should fail within the first year of ownership, we will replace your Precision Kettle with an identical or comparable replacement. Your replacement unit will also be covered by our one-year limited warranty.
      If your Precision Kettle should fail within the first year of ownership, simply call our toll-free Customer eXperience Center at 1-800-807-6777 Monday through Friday. Please have your original sales receipt available when you call. Proof of purchase will be required to initiate the claim. Give the consultant your complete shipping address.
      When you receive your replacement Precision Kettle, use the carton, packing materials, and prepaid shipping label to pack up your original Precision Kettle and send it back to KitchenAid.
      ARRANGING FOR SERVICE AFTER THE WARRANTY EXPIRES, OR ORDERING ACCESSORIES AND REPLACEMENT PARTS
      In the United States and Puerto Rico:
      For service information, or to order accessories or replacement parts, call toll-free at 1-800-541-6390 or write to
      Customer eXperience Center, KitchenAid Small Appliances, P.O. Box 218, St. Joseph, MI 49085-0218
      Outside the United States and Puerto Rico:
      Consult your local KitchenAid dealer or the store where you purchased the Precision Kettle for information on how to obtain service.
      For service information in Canada:
      Call toll-free at 1-800-807-6777.
      For service information in Mexico:
      Call toll-free 01-800-0022-767.

      ®/TM ©2018 KitchenAid. All rights reserved.
      KITCHENAID and the design of the stand mixer are trademarks in the U.S. and elsewhere.
      Used under license in Canada.
      DISCOVER MORE. 
      KITCHENAID.COM/QUICKSTART PRODUCT QUESTIONS OR RETURNS
      USA: 1.800.541.6390 | KitchenAid.com
      CANADA: 1.800.807.6777 | KitchenAid.ca
      MEXICO: KitchenAid.com.mx
      LATIN AMERICA: KitchenAid-Latam.com ®/™ ©2018 KitchenAid. All rights reserved.
      KITCHENAID and the design of the stand mixer are trademarks in the U.S.
      and elsewhere. Used under license in Canada.
      W11165139A
      01/18