D-Link Gigabit Industrial Unmanaged Switches Datasheet
Product Highlights
Robust Design
High EMC endurance, fanless design, and a wide operating temperature range combined with IP40 housing to withstand harsh operating environments
Industrial Deployment
Compact, plug-and-play form factor design that supports DIN rail mounting to allow for flexible and swift deployment
Flexible Availability
4 and 8 1GBASE-T port options are available for varying network deployments, in addition to 2 SFP uplink ports on both models for long distance connections
DIS-100G-6S and DIS-100G-10S Gigabit Industrial Unmanaged Switches
Features
Adaptable Application
- SFP ports for long-distance connections
- Plug-and-play installation
Robust and High-Redundancy Design
- Fanless, passive cooling design
- Industrial grade operating temperature (-20 ~65 °C)
- High EMS endurance
- Durable IP40-rated housing
- Dual power input for redundant power supplies
- Built-in 6 kV surge protection on copper ports
Advanced Features
- 9.6 KB Jumbo Frame
- IEEE 802.3x Flow Control
- IEEE 802.1q Quality of Service (QoS) with 8 hardware queues per port
- IEEE802.3az Energy Efficient Ethernet
The DIS-100G-6S and DIS-100G-10S Gigabit Industrial Unmanaged Switches are equipped with a variety of port combinations including 10/100/1000BASE-T ports and SFP ports. These switches feature a robust design making them ideal for deployment in industrial and outdoor cabinet surveillance settings and capable of withstanding the harshest environments. In addition, the DIS-100G-6S and DIS-100G-10S are plug-and-play, allowing for effortless and swift deployment.
Durable, Reliable, and Efficient
The DIS-100G-6S and DIS-100G-10S switches are housed in a highly resistant IP40-rated metal casing to protect the switches from harsh environmental conditions. High electromagnetic susceptibility (EMS) protects the DIS-100G-6S and DIS-100G-10S from undesirable effects when operating in environments with strong electromagnetic interference. Meanwhile, the fanless design extends the life of the DIS-100G-6S and DIS-100G-10S while also enabling them to operate in a wide temperature range from -20 °C up to 65 °C. With DIN rail mounting capability, the DIS-100G-6S and DIS-100G-10S can fit seamlessly into your industrial equipment infastructure. In addition, the DIS-100G-6S and DIS-100G-10S supports dual power input, which allows for a redundant power supply configuration to make sure the switches continue to operate in the event of a primary power supply failure.
Meanwhile, a powerful IEEE 802.1p Quality of Service (QoS) engine prioritizes network traffic so that high-priority data is delivered effectively and efficiently, even during bursts of high network traffic. This helps ensure an optimal experience for streaming critical data such as surveillance and recognition systems.
Green Ethernet Technology
The DIS-100G-6S and DIS-100G-10S features green technology; IEEE 802.3az Energy-Efficient Ethernet (EEE). Energy-Efficient Ethernet reduces the power consumption of the switches when network utilization is low, effectively lowering the cost of ownership during periods of inactivity.
Deployment Scenario
AP/Surveillance
Technical Specifications
| General | DIS-100G-6S | DIS-100G-10S |
| Hardware Version | • A2 | |
| Number of Ports | • 4 x 10/100/1000BASE-T ports • 2 x SFP port |
• 8 x 10/100/1000BASE-T ports • 2 x SFP port |
| Port Functions | • IEEE 802.3 for Ethernet | |
| Media Interface Exchange | • Auto-MDI/MDIX adjustment for all twisted pair ports | |
| Performance | ||
| Switching Capacity | • 12 Gbps | • 20 Gbps |
| Maximum Forwarding Rate | • 8.928 Mpps | • 14.88 Mpps |
| MAC Address Table Size | • Up to 4K entries | |
| Transmission Method | • Store-and-forward | |
| Jumbo Frame | • 9.6 KB | |
| Advanced Features | • IEEE 802.1p Quality of Service (QoS) – 8 hardware queues per port | |
| Physical | ||
| Diagnostic LEDs | • PWR | |
| Power Input | • 12 to 48 VDC terminal block dual input | |
| Power Consumption | • Maximum: 4.89 W • Standby: 1.48 W |
• Maximum: 7.61 W • Standby: 2.08 W |
| Alarm Relay | • 1 A at 24 V | |
| Heat Dissipation | • 16.68 BTU/hr | • 25.97 BTU/hr |
| Weight | • 0.4596 kg (1.0132 lbs) | • 0.5666 kg (1.2491 lbs) |
| Dimensions | • 162 x 102 x 28 mm (6.38 x 4.02 x 1.10 in) | • 190 x 100 x 28 mm (7.48 x 3.94 x 1.10 in) |
| Ventilation | • Fanless, passive cooling | |
| Operating Temperature | • -20 to 65 °C (-4 to 149 °F) | |
| Storage Temperature | • -40 to 85 °C (-40 to 185 °F) | |
| Operating Humidity | • 5% to 95% RH, non-condensing | |
| Storage Humidity | • 5% to 95% RH, non-condensing | |
| Material | • IP40-rated metal casing | |
| Installation | • DIN rail | |
| MTBF | • 794,683 hrs | • 490,031 hrs |
| Certifications | • CE | |
| EMI | • 47 CFR FCC Part 15 Subpart B (Class A) | |
| EMS | • EN 61000-4-2 ESD | |
| Environmental Tests | • IEC 60068-2-27 Shock | |
| Order Information | ||
| Part Number | Description | |
| DIS-100G-6S | 4 x 10/100/1000 Mbps ports + 2 x SFP port switch, -20 to 65 °C operating temperature | |
| DIS-100G-10S | 8 x 10/100/1000 Mbps ports + 2 x SFP port switch, -20 to 65 °C operating temperature | |
| Optional SFP Transceivers | ||
| DIS-S310LX | 1000BASE-LX, single-mode, 10 km, -40 to 85 °C operating temperature | |
| DIS-S301SX | 1000BASE-SX, multi-mode, 550 m, -40 to 85 °C operating temperature | |
| DIS-S302SX | 1000BASE-SX, multi-mode, 2 km, -40 to 85 °C operating temperature | |
| DIS-S330EX | 1000BASE-EX, single-mode, 30 km, -40 to 85 °C operating temperature | |
| DIS-S350LHX | 1000BASE-LHX, single-mode, 50 km, -40 to 85 °C operating temperature | |
| DIS-S380ZX | 1000BASE-ZX, single-mode, 80 km, -40 to 85 °C operating temperature | |
| Optional Accessories | ||
| DPE-SP110 | Outdoor PoE Ethernet Surge Protector | |
| DPE-SP110I | Ethernet Surge Protector | |
Updated 2021/03/31
Specifications are subject to change without notice. D-Link is a registered trademark of D-Link
Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners.
©2021 D-Link Corporation. All rights reserved. E&OE.