KitchenAid KSB1575 Stand Blender Owner’s Manual

KitchenAid KSB1575 Stand Blender Owner's Manual

PARTS AND FEATURES

Lid with ingredient cup
BPA Free pitcher
Stainless steel blade
Clean touch control pad
Die-cast metal base
Speed selection buttons
1: Stir, 2: Chop, 3: Mix, 4: Puree, and 5: Liquify.
Crush Ice function
Pulse function
Power function
Light Indicator

PRODUCT SAFETY

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

Read all instructions.
To protect against the risk of electrical shock, do not put Blender in water or other liquid.
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning the use of the appliance by a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
Avoid contact with moving parts.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Contact the manufacturer at their customer service telephone number for information on examination, repair, or adjustment.
Do not use the appliance outdoors.
Do not let cord hang over edge of table or counter.
Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the Blender. A scraper may be used but must be used only when the Blender is not running.
Blades are sharp. Handle carefully
Always operate Blender with cover in place.
The use of attachments, including canning jars, not recommended by KitchenAid may cause a risk of injury to persons.
When blending hot liquids, remove center piece of two-piece cover.
Flashing light indicates ready to operate – avoid any contact with blades or moveable parts.

SAVE THESE INSTRUCTIONS

This product is designed for household use only

ELECTRICAL REQUIREMENTS

Voltage: 120 V
Frequency: 60 Hz
Amperage: 6.0 A
NOTE: If the plug does not fit in the outlet, contact a qualified electrician or service technician. Do not modify the plug in any way. Do not use an adapter.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or service technician to install an outlet near the appliance.

MOTOR HORSEPOWER

Motor horsepower for the Blender motor was measured using a dynamometer, a machine that laboratories routinely use to measure the mechanical power of motors. Our 0.9 peak horsepower (HP) motor reference reflects the horsepower output of the motor itself and not the Blender’s horsepower output in the Blender pitcher. As with any blender, the power output in the pitcher is not the same as the horsepower of the motor itself.

GETTING STARTED

First, clean all parts and accessories (see “Care and Cleaning” section).
Be sure the countertop beneath the Blender and surrounding areas are dry and clean.
The Blender pitcher ingredient cup can be used to measure and add ingredients. Remove cup and add ingredients at 1 Stir, 2 Chop, or 3 Mix speeds. When operating at higher speeds with a full pitcher or with hot contents, stop the Blender and then add ingredients.
The Soft Start blending feature automatically starts the Blender at a lower speed to draw ingredients into the blades, then quickly increases to the selected speed for optimal performance. The Soft Start blending feature only works when a speed is selected and does not work with the Pulse mode or Crush Ice features.

SPEED CONTROL GUIDE

PRODUCT ASSEMBLY

IMPORTANT: When moving your Blender, always lift from the Blender base. Base will become disengaged from pitcher if carried by Blender pitcher or Blender pitcher handle only.

NOTE: When properly positioned, the pitcher will rest completely on the Blender base. If not, repeat step 2. Make sure the pitcher is properly locked onto the Blender base.

IMPORTANT: If blending hot foods or liquids, do not fill to the top of the pitcher, and operate only on 1 Stir speed. Remove center cap and place towel over lid.

While the Blender Power indicator light or the Pulse mode indicator light is blinking:

Do not interfere with blade movement.
Do not remove pitcher lid.

PRODUCT USAGE

USING THE CRUSH ICE FUNCTION

Blender offers a CRUSH ICE feature. When selected, the Blender will automatically pulse for 30 seconds at staggered intervals at the optimal speed for crushing ice or other ingredients.

TIP: Process up to 1/2 standard ice cube tray or 6 to 7 standard ice cubes at a time. Occasional stirring with a spatula will be helpful only when Blender is off.
The Crush Ice feature has been optimized to crush and chop ice without adding any liquid ingredients.

USING PULSE MODE

CARE AND CLEANING

NOTE: Do not immerse the Blender base or cord in water. Do not use abrasive cleansers or scouring pads to avoid scratching. Unplug the Blender before cleaning.

TROUBLESHOOTING GUIDE

TIP: The Blender will not operate at any speed unless the POWER button is pressed first.

If the problem is not due to one of the above items, see the “Warranty and Service” sections.Do not return the Blender to the retailer. Retailers do not provide service.

WARRANTY AND SERVICE

KITCHENAID® BLENDER WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA, PUERTO RICO, AND CANADA

This warranty extends to the purchaser and any succeeding owner for Blender operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada.

HASSLE-FREE REPLACEMENT WARRANTY – 50 UNITED STATES, DISTRICT OF COLUMBIA, AND PUERTO RICO

We’re so confident the quality of our products meets the exacting standards of KitchenAid that, if your Blender should fail within the first year of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to
have your original Blender returned to us. Your replacement unit will also be covered by our one year limited warranty. Please
follow these instructions to receive this quality service.
If your Blender should fail within the first year of ownership, simply call our toll-free Customer eXperience Center at 1-800-541-6390 Monday through Friday. Please have your original sales receipt available when you call. Proof of purchase will be required to initiate the claim. Give the consultant your complete shipping address. (No P.O. Box numbers, please.) When you receive your replacement
Blender, use the carton and packing materials to pack up your original Blender. In the carton, include your name and address on a sheet of paper along with a copy of the proof of purchase (register receipt, credit card slip, etc.).

HASSLE-FREE REPLACEMENT WARRANTY—CANADA

We’re so confident the quality of our products meets the exacting standards of the KitchenAid® brand that, if your Blender should fail within the first year of ownership, KitchenAid Canada will replace your Blender with an identical or comparable replacement. Your replacement unit will also be covered by our one year limited warranty. Please follow these instructions to receive this quality service.
If your Blender should fail within the first year of ownership, take the Blender or ship collect to an Authorized KitchenAid Service Centre. In the carton include your name and complete shipping address along with a copy of the proof of purchase (register receipt, credit card slip, etc.). Your replacement Blender will be returned prepaid and insured. If you are unable to obtain satisfactory service in this manner
call our toll-free Customer eXperience Centre at 1-800-807-6777. Or write to us at: Customer eXperience Centre KitchenAid Canada 200 – 6750 Century Ave. Mississauga, ON L5N 0B7

ARRANGING FOR SERVICE AFTER THE WARRANTY EXPIRES, OR ORDERING ACCESSORIES AND REPLACEMENT PARTS

In the United States and Puerto Rico: For service information, or to order accessories or replacement parts, call tollfree at 1-800-541 6390 or write to: Customer eXperience Center, KitchenAid Portable Appliances, P.O. Box 218, St. Joseph, MI 49085-0218 Outside the United States and Puerto Rico: Consult your local KitchenAid dealer or the store where you purchased the Blender for information on how to obtain service. For service information in Canada: Call toll-free 1-800-807-6777. Or write to: Customer eXperience Centre KitchenAid Canada 200 – 6750 Century Ave. Mississauga, ON L5N 0B7

PRODUCT QUESTIONS OR RETURNS

USA: 1.800.541.6390 | KitchenAid.com
CANADA: 1.800.807.6777 | KitchenAid.ca
MEXICO: KitchenAid.com.mx
LATIN AMERICA: KitchenAid-Latam.com

W11382494A 08/19

Download

KitchenAid KSB1575 Stand Blender Owner’s Manual

Was this manual helpful?