Motorola MOTOTRBO Professional Portable Two Way Radio User Guide
MOTOTRBO™
XPR 7550 IS, XPR 7580e
IS SERIES PORTABLE RADIOS
Your Quick Reference Guide
This Quick Reference Guide covers the basic operation of the radio. Check with your dealer or system administrator because your radio may have been customized for your specific needs.
For more operational details and information on warnings and safety, refer to the following User Guide:
Full Keypad Portable
68009593001
Important Safety Information
RF Energy Exposure and Product Safety Guide for Portable TwoWay Radios
Product Safety and RF Exposure Compliance
Before using this product, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet enclosed with your radio.
ATTENTION!
This radio is restricted to occupational use only. Before using the radio, read the RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and Regulations.
Any modification to this device, not expressly authorized by Motorola Solutions, may void the user’s authority to operate this device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.
This radio transmitter has been approved by Industry Canada to operate with Motorola Solutions-approved antenna with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, is strictly prohibited for use with this device.
Computer Software Copyrights
The Motorola Solutions products described in this manual may include copyrighted Motorola Solutions computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola Solutions certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program.
Accordingly, any copyrighted Motorola Solutions computer programs contained in the Motorola Solutions products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola Solutions. Furthermore, the purchase of Motorola Solutions products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola Solutions, except for the normal nonexclusive license to use that arises by operation of law in the sale of a product.
Radio Control
| 1. Channel Selector Knob 2. On/Off/Volume Control Knob 3. LED Indicator 4. Programmable Side Button 1 5. Push-to-Talk (PTT) Button 6. Programmable Side Button 2 7. Programmable Side Button 3 8. Programmable Front Button P1 9. Menu/OK Button 10. 4-Way Navigation Button |
11. Keypad 12. Back/Home Button 13. Programmable Front Button P2 14. Display 15. Microphone 16. Speaker 17. Universal Connector for Accessories 18. Programmable Emergency Button 19. Antenna |
Attaching the Battery
- Align the battery with the rails on the back of the radio.
- Slide the battery upwards until the latch snaps into place.
- Lock the battery latch.
Attaching the Antenna
- Turn off the radio.
- Set the antenna in the receptacle and turn clockwise.
Turning the Radio On and Off
Rotate the On/Off/Volume Control Knob clockwise or counterclockwise until a click sounds.
Adjusting the Volume
Rotate the On/Off/Volume Control Knob clockwise or counterclockwise.
LED Indicators
Blinking Red
Radio has failed the self-test upon powering up, has moved out of range if Auto-Range Transponder System is configured, has Mute mode enabled, is receiving an emergency transmission, is transmitting in low battery state, or is indicating a battery mismatch.
Solid Green
Radio is powering up, transmitting, or sending a Call Alert or an emergency transmission.
Blinking Green Radio is receiving a call or data, detecting activity over the air, or retrieving Over-the-Air Programming transmissions.
Double Blinking
Green Radio is receiving a privacy-enabled call or data.
Solid Yellow
Radio is monitoring a conventional channel.
Blinking Yellow
Radio is scanning for activity, has yet to respond to a Call Alert, or all Capacity Plus-Multi-Site channels are busy.
Double Blinking
Yellow Radio has Auto Roaming enabled, has yet to respond to a Group Call Alert, is actively searching for a new site, is not connected to the repeater while in Capacity Plus, is locked, or all Capacity Plus channels are busy.
Display Icons
The following icons appear on the status bar at the top of the radio display. The icons are arranged left most in order of appearance or usage and are channel-specific.
| Emergency | Secure | ||
| Scan¹ | Unsecure | ||
| High Volume Data | Site Roaming | ||
| Mute Mode | Option Board | ||
| Tones Disabled | Power Level | ||
| Ring Only | Sign In | ||
| Notification | Sign Out |
- Not available for Capacity Max.
NOTES
Motorola Solutions, Inc.
500 W Monroe Street
Chicago, IL 60661 U.S.A.
www.motorolasolutions.com/mototrbo Motorola Solutions, Inc.
500 W Monroe Street Chicago, IL 60661 U.S.A.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS, and the Stylized M Logo are trademarks or registered trademarks of
Motorola Trademark Holdings, LLC and are used under license.
All other trademarks are the property of their respective owners.
© 2013 and 2020 Motorola Solutions, Inc.
All rights reserved.
AUGUST 2020
© 2020 Motorola Solutions, Inc. All rights reserved.
