Hoover MPWR 40V Cordless Upright CH95519 User Guide

HOOVER MPWR 40V Cordless Upright CH95519

WARNING ALWAYS REMOVE THE BATTERY PACK from the appliance before making any adjustments, changing accessories, storing product, cleaning or when not in use.

Assembly & Daily Operation

  1. Make sure Upper Tube Connector A is installed on Upper Tube B
  2. Insert Upper Tube into the top of Debris Transfer Tube C until it locks in place,
  3. Twist Upper Tube Connector A clockwise until it clicks to secure Upper Tube B
  4. Route wire through clip D on side of pole,

BATTERY STATUS

When charging, the fully lit LEDs on the battery will indicate charge level

INSERTING BATTERY

  1. Remove fully charged battery from charger,
  2. Insert into housing and push firmly until locked into place,

HANDLE RELEASE

Step on A power head and pull handle bock to lower into operating position, Return handle to full upright position to engage lock, This product features Auto Stop and will not operate in the upright position by disengaging power to the motor,

POWER

Push fingertip controls on the handle forward to select Hush mode or Boost. Push controls backward into the “OFF” position to turn off,

CHANGING THE BAG

  1. Unzip the Filtration Bog Cose completely,
  2. Pull the cardboard collar on the filtration bog downward to release the bog dock from the dock port.
  3. Gently pull the cardboard collar on the filtration bog up to engage the self sealing lock and remove from the bog dock, Discard.
  4. Slide new filtration bog collar firmly into the bog dock ensuring hooks on dock door ore inserted on the collar,
  5. Rotate bog dock up and press firmly on the filtration bog at indicated points until it snops into place,
  6. Zip up the filtration bog case completely,

REPLACEMENT FILTER
AH1D159 – Standard Filtration

REPLACEMENT BAGS
AH10330 – HEPA Filtration