Yamaha RX-A4A Home Theatre Receiver User Guide
AV Receiver RX-A4A
Manual Development Group © 2021 Yamaha Corporation
Published 03/2021 KSEM-A0
VDN9560
- Be sure to read the supplied “Safety Brochure” before using the unit.
- This document explains the basic speaker system setup and unit configuration.
RX-A4A
AV SETUP GUIDE is an app that guides you through the process of connecting a TVplayback device, and speakers to the AV receiver. Search “AV SETUP GUIDE” on the App Store or Google Play for details.
Confirming accessories and preparing cables (not supplied)
Accessories
|
8. Power cable (×1) The supplied power cable varies depending on the region of purchase. • Quick Start Guide (this booklet) • Safety Brochure 1) 1. Except for models for U.K., Europe, Russia, and Australia 1. Models for U.K., Europe, Russia, and Australia onlyCables (not supplied) • Speaker cables (depending on the number of speakers) • Audio pin cable (×1) • HDMI cables (×3) |
Connecting speakers/subwoofer
Positioning speakers for the 5.1.2-channel system
Do not connect speaker cables improperly. Failure to observe this precaution could cause a short circuit resulting in damage to, or malfunctioning of, the unit or
speakers.
• Other speaker configurations
• Information regarding the speaker impedance
Connecting external devices
https://manual.yamaha.com/av/20/rxa4a/q2connectingtv.html
Connecting the FM/AM antennas or DAB/FM antenna
Connecting the power cable to an AC wall outlet
Turning on the unit
- Press
- Select this unit as the input source on the TV.
If “Check SP Wires” is shown on the front display when the unit is turned on, turn off the unit and be sure that speaker cables have not caused a short circuit.
The network setting screen is displayed on the TV. Press
Connecting to a network with the MusicCast CONTROLLER app
- Download the dedicated MusicCast CONTROLLER app to your mobile device on the App Store or Google Play.
- Follow the app’s on-screen instructions to configure network settings.
Important notice regarding information security
Visit the website shown at right for details.
https://manual.yamaha.com/av/policy/mcc/
Optimizing the speaker settings automatically (YPAO)
The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections measures the distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room.
Note the following regarding YPAO measurement
• Do not let children or pets into the room as test tones are output at high volume. (Test tone volume cannot be adjusted.)
- Turn on the subwoofer and set the volume to half. If the crossover frequency can be adjusted, set it to the maximum.
- Connect the YPAO microphone to the unit. The start-up screen is displayed on the TV. A
- Press
(ENTER) on the remote control. The measurement will start in 10 seconds. It takes about 3 minutes to measure. The screen is displayed on the TV when the measurement finishes. Select “Measurement result” and press (ENTER) to display the measurement result if required. B - Use the cursor keys (∧/∨) on the remote control to select “Save” and press
(ENTER) on the remote control. - Disconnect the YPAO microphone from the unit.
https://manual.yamaha.com/av/20/rxa4a/q3ypao.html
Playing a BD/DVD
|
https://manual.yamaha.com/av/20/rxa4a/q4scene.html
Playing music files on a Bluetooth ® device
|
AirPlay
Click or tap the AirPlay icon in iTunes or on the iPhone, and select the unit as the audio output destination to listen to music using the AirPlay function.