Pioneer SDA-8TAB Car Multimedia Receiver User Manual

8″ Tablet
SDA-8TAB SDA-80TAB
Operation Manual

Installing/Removing a microSD card (not included)

You can install a microSD card (not included) to add additional memory space to your tablet.
Note: The microSD card is not included. This tablet supports microSD cards with capacities up to 2 GB, and microSDHC cards with capacities up to 32 GB.
1. microSD card

Turning the tablet on/off

When charged, press and hold the power button to power on the tablet. Press and hold the power button to power off after using.
To turn the display off, press the power button shortly.

Setting up the tablet

When you first turn the tablet on, Setup Wizard guides you through the following setup process.

Language selection
Wi-Fi network settings (Wi-Fi connection required)
Copy apps & data (Wi-Fi connection required)
Google Account settings
Date and time settings
Google terms of service
Screen lock settings
Google Assistant settings

Turn on the tablet.
Select a language.
Tap [START].
Select a Wi-Fi network you want to connect to and enter the password on
the next screen.
Tap [SKIP] if you want to skip connecting to Wi-Fi, then tap [CONTINUE] on the next screen. Proceed to Step 8.
Transfer your data from another device (s) after connecting to a Wi-Fi network.
Sign in to your existing Google Account or create a new account after connecting to a Wi-Fi network.
Set the date and time.
Confirm the screen of Google terms of service, then tap [ACCEPT].
Set up your lock-screen security.
If you are not setting a screen lock, tap [SKIP], then [SKIP ANYWAY] on the next screen.
Set up Google Assistant.
Confirm that the home screen is displayed after setup is complete.

Home screen
Tap the APP icon to configure the general settings.

Additional Information

Troubleshooting

The unit cannot be turned on
→The built-in battery is empty.
– Charge the battery.
→The unit was left in an environment with conditions beyond its guaranteed operating range.
– Turn on the unit when it reaches a temperature within the guaranteed operating range.
The battery cannot be charged
→The micro USB plug has not been inserted correctly into the unit’s micro USB port
– Correctly insert the micro USB plug of the USB cable into the micro USB terminal of the main unit.
→The unit’s temperature protection function was activated because of the increase in the unit’s temperature caused by the usage conditions.
– Charge the battery after the unit cools down.
→The unit’s temperature protection function was activated because of the decrease in the unit’s temperature caused by a low-temperature environment.
– Charge the battery after the unit warms up.
Even when fully charged, the battery life is exceptionally short
→The built-in battery has short battery life.
– Contact your dealer or an authorized Pioneer Service Station for assistance.
There is no sound, or the sound volume is low
→Audio volume is set to 0, or the audio volume is set very low.
– Turn up the audio volume.
There are tiny black or bright spots showing up on the screen
→This is a phenomenon unique to liquid crystal displays and is not a malfunction.
– N/A.

Copyright and trademark

Google™ and Android™
Google and Android are trademarks of Google LLC.
microSD, microSDHC

microSD, microSDHC Logos are trademarks of SD-3C LLC.

Specifications

Operating System: Android 9 Pie
CPU: ARM Quad-core Cortex-A7 1.8 GHz
RAM: 2 GB
ROM: 16 GB
Display: Screen size 8 inch Screen resolution WXGA (800 × 1280) IPS
Touch Panel: 5 Points capacitive touch panel Glass + Glass
Camera: Front side 0.3 M pixel Fixed Focus Rear side 2.0 M pixel Fixed Focus
GNSS: Positioning method (GPS / Glonass)
Sensor: Acceleration sensor: 3 Axis Illuminance sensor
Speaker: Built-in speaker 1.0 W/8 (Mono)
Microphone: Built-in microphone (Mono)
Network Connections
Wi-Fi: IEEE802.11b/g/n (2.4 GHz)
Bluetooth
Ver: Bluetooth 4.2 (Class 2) Profiles SPP/A2DP/AVRCP
Interface Configuration: Headphone jack (1-input)
φ3.5 mm standard headphone jack CTIA
USB Interface: Micro USB type-B × 1 (USB-OTG)
Memory Card: Slot microSD card × 1 Supported SD Memory Card: microSD, microSDHC
SD Speed Class: Class 10
Playable video format MPEG4-SP, H.264/AVC, H.263, AVI, H-265/HEVC, -VP9, MPEG2, FLV
Playable image format (Google_CDD required) JPEG, GIF, PNG, BMP, WebP, Raw, HEIF
Playable audio format (Google_CDD required) AAC_LC, AAC+, enhanced_AAC+, AAC ELD, xHE-AAC (USAC/AMR-NB/AMR-WB), FLAC, MP3, PCM/WAVE
Dimensions:
213 × 125 × 11.4 mm
217 × 141 × 15 mm (with tablet case)
Weight:
393 g
490 g (with tablet case)
Built-in Battery
Capacity: About 4000 mAh
Power supply
USB or Built-in Battery
Operating temperature -10°C~60°C (When operating)
Accessories
USB cable (microUSB_B – USB_A), Tablet Case, Owner’s manual, Warranty card, Caution card
Bluetooth
Output power: +4 dBm Maximum (Power class 2)
Frequency band(s): 2 400 MHz to 2 483.5 MHz

https://www.pioneer-car.eu/eur/
Visit www.pioneer-car.eu/uk/ (or www.pioneer-car.eu/eur/) to register your product.

Download

Pioneer SDA-8TAB Car Multimedia Receiver User Manual

Was this manual helpful?