Canon imagePRESS C10010VP/C9010VP User Guide

imagePRESS C10010VP/C9010VP

Quick Guide
Read this guide first.
Please read “Important Safety Instructions” before operating this product. After you finish reading this guide, store it in a safe place for future reference. The information in this document is subject to change without notice.
Guide rapide
Veuillez d’abord lire ce guide.
Prenez connaissance des “Consignes de sécurité importantes” avant toute utilisation de ce produit. Après en avoir pris connaissance, conservez ce guide dans un endroit sûr en vue de consultations ultérieures. Les informations contenues dans ce document sont sujettes à modification sans préavis.
Kurzanleitung
Bitte lesen Sie dieses Handbuch zuerst.
Lesen Sie die “Wichtigen Sicherheitshinweise”, bevor Sie dieses Produkt verwenden. Bewahren Sie diese Anleitung an einem sicheren Ort zwecks künftiger Einsichtnahme auf, nachdem Sie sie gelesen haben. Die Informationen in diesem Dokument können ohne vorherige Ankündigung geändert werden.
Guida rapida
Leggere questa guida.
Prima di utilizzare il prodotto, leggere le “Importanti istruzioni per la sicurezza”. Dopo aver completato la lettura di questa guida, conservarla in un luogo sicuro per riferimenti futuri. Le informazioni contenute in questo documento sono soggette a modifiche senza preavviso.
Guía breve
Lea esta guía primero.
Lea las “Instrucciones de seguridad importantes” antes de utilizar este producto. Al acabar de leer esta guía, guárdela en un lugar seguro para futuras consultas. La información de este documento puede ser modificada sin previo aviso.
https://oip.manual.canon/

imagePRESS C10010VP / C9010VP
Practical Features
Auto Gradation Adjustment for Various Paper Types
The gradation, density, and color tone of an image can be automatically corrected by outputting test pages and scanning them using the color sensor built into the machine. This function can be used for various weights of paper so that a high quality print result can be obtained in different paper types.
“Adjustment for Image Quality and Finishing (Calibration)” in the User’s Guide
Achieve High Quality Color Reproduction with Auto Color Tone Correction
The color tone of an image can be automatically corrected by outputting test pages and scanning them using the color sensor built into the machine. Compared to the Auto Adjust Gradation function, which adjusts CMYK, the Auto Correct Color Tone function adjusts mixed colors that are expressed with multiple toner. By using these functions together, you can perform the precise color adjustment.
“Adjustment for Image Quality and Finishing (Calibration)” in the User’s Guide
Optimum Print Result for Each Paper Type
Paper information, which includes the basis weight, finish, fixing, and curl correction level, can be registered as the paper characteristics. As the detailed information can be specified for each different paper type, you can obtain the fine print result with considering the paper characteristics. This function is also effective for improving paper conveyance and print quality.
“Paper Type Management” in the User’s Guide
Curl Correction for Stable Paper Conveyance
The machine constantly corrects the paper curl which occurs due to the pressure applied when toner is fixed. Moreover, by correcting the paper curl during outputting, the machine reduces the risk of a paper jam, and achieves the stable paper conveyance. The curl correction can be specified for each paper type you want to use.
“Adjustment for Image Quality and Finishing (Calibration)” in the User’s Guide “Paper Type Management” in the User’s Guide

Easy Operation for Adjusting Image Position
You can adjust the image positions easily with this machine. All you need is measuring marks on the test page and then entering the measured values on the touch panel display. After that, the machine will automatically adjust the image positions. You can make the complicated adjustment easily by entering values for each edge of front and back sides on a single screen.
“Paper Type Management” > “Adjusting the Image Position” > “Adjusting Individual Image Position Setting by Using the Test Page” in the User’s Guide
You can adjust the image position quickly by using the guide sheet. (This adjustment can be performed when the Duplex Color Image Reader Unit-M is attached.)
“Paper Type Management” > “Adjusting the Image Position” > “Adjusting Image Position by Using the Guide Sheet” in the User’s Guide
Quick Access to Frequently Used Settings
Different settings are required, depending on the printing purpose or paper types, but accessing setting items located in various menus every time is a quite complicated operation. In this case, register frequently used settings in “Settings/Registration Shortcut” button. You can directly access to the setting screen with this button and save the effort to search necessary setting items.
“Settings/Registration” in the User’s Guide
Alternative Settings for Your Needs, “Productivity” or “Quality”
You can set a priority to either print productivity or image quality. For instance, select “Productivity Priority” when printing a large number of documents to achieve speedy printing. On the other hands, select “Quality Priority” when printing documents which contain many pictures to obtain precisely printed images. This function can be set for each paper type to suit your various needs for printing.
“Settings/Registration” in the User’s Guide

Test page Guide sheet

Contents

Thank you for purchasing this Canon product. Please read this manual thoroughly before operating the machine to familiarize yourself with its capabilities, and to make the most of its many functions. For more information on the detailed settings for the functions, see the User’s Guide. After reading this manual, store it in a safe place for future reference.

Parts and Their Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . 6 External View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Internal View (Marking Engine). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Internal View (Fixing Station). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Control Panel (Upright Control Panel-F) OPTION . . . . . . . . . . . 9
Status Monitor/Cancel Screen . . . . . . . . . . . . . . . . . . . . . 11
How to Turn ON the Main Power. . . . . . . . . . . . . . . . . . . 12 Turning ON the Main Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Shutting Down the Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Paper Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Registering Paper Types in the Paper Database . . . . . . . . . . . . . . .16 Loading Paper into the Paper Deck . . . . . . . . . . . . . . . . . . . . . . . . . .17 Registering Custom Paper Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Cleaning and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 22 Cleaning the Platen Glass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Cleaning the Original Scanning Area . . . . . . . . . . . . . . . . . . . . . . . . .22 Cleaning the Feeder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Automatic Feeder Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Cleaning the Inside of the Main Unit . . . . . . . . . . . . . . . . . . . . . . . . .25 Refreshing the Fixing Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Cleaning the Touch Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Clearing Paper Jams and Staple Jams . . . . . . . . . . . . . . . . . . . . . . . .29 Reducing the Frequency of Paper Jams . . . . . . . . . . . . . . . . . . . . . .29 When an Error Message Is Displayed . . . . . . . . . . . . . . . . . . . . . . . . .30 Contacting Your Local Authorized Canon Dealer . . . . . . . . . . . . .31 If Memory Becomes Full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 If the Main Power Does Not Turn ON . . . . . . . . . . . . . . . . . . . . . . . . .32
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Symbols Used in This Manual

CAUTION IMPORTANT
NOTE

Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always pay attention to these cautions.
Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly, and avoid damage to the machine or property.
Indicates a clarification of an operation, or contains additional explanations for a procedure. Reading these notes is highly recommended.

Indicates useful functions or tips for using the machine.

OPTION

You can find further information from the online manual site (https://oip.manual.canon/). A detailed explanation is described on the specified page of this manual. Indicates an optional product which can be used with this machine.

Keys and Buttons Used in This Manual
The followings are examples of how keys and buttons are expressed in this manual. · Touch Panel Display Keys: [Key Name]

[Copy]

[Close]

· Control Panel Keys: Key Icon
· Buttons on Computer Operation Screens: [Button Name] [OK], [Add], [Cancel]

You can access https://oip.manual.canon/ to read the User’s Guide that describes all functions of this machine.
You can download the manual for each model as follows: · For the PRISMAsync model, access the Canon Production Printing website. · For the imagePRESS Server model, access the EFI website.

Parts and Their Functions
This section provides you with the names and functions of all the parts of the machine. The keys and display on the control panel are also described. Read this section to use the machine’s various functions smoothly.
“Optional Products” in the User’s Guide

External View Back side 1
8

2 Right side 3
4 5

6 7

1 Upright Control Panel-F
Includes the keys, touch panel display, and indicators required for operating the machine.
2 Main Power Switch
Press to the “|” side to turn the power ON.
3 Power Supply Unit
Provides power to the marking engine and fixing station.
4 Marking Engine Front Right Cover/Front Left Cover
Open these covers to clear a paper jam inside the marking engine.

5 Open Button
Press to open the paper deck when you need to load paper or check for a paper jam. The paper supply indicator enables you to check the amount of paper remaining in the paper deck.
6 Right/Left Paper Deck
Holds up to 1,000 sheets of paper (80 g/m2) for each paper deck.
7 Fixing Station Front Right Cover/Front Left Cover
Open these covers to clear a paper jam inside the fixing station.
8 Power Cord
Supplies power from an AC outlet to the main unit and Duplex Color Image Reader Unit-M (option).

Internal View (Marking Engine)

8 7

Back side

Parts and Their Functions
1 2 3

1 Toner Cartridge
Open the cover to replace the toner cartridge.
2 ITB (Intermediate Transfer Belt)
Transfers the toner to the paper.
3 Feeding Unit
Delivers paper that is fed from the paper deck to the fixing station via the toner transfer position. Also, the Feeding Unit delivers paper from the fixing station when the 2nd side of 2-Sided page mode is set. Pull out this unit to clear a paper jam inside the unit.
4 Skew Correction Roller
Compensates for paper skewing or dispersion of side edges.

5 Test Button
Located on the back of the power supply unit. Press this button to periodically test the circuit breaker.
6 Breaker
Located on the back of the power supply unit. Detects excess current or leakage current.
7 LAN Port
Located on the upper left area of the marking engine. Use this port to connect the machine to the network (imagePRESS Server).
8 USB Port
Located on the upper left area of the marking engine. This connector is not normally used as it is for service representatives.

Internal View (Fixing Station)

1 Primary Fixing Assembly
Fixes toner that has transferred to paper. Pull out the primary fixing unit to clear a paper jam inside the assembly.
2 Secondary Fixing Assembly
Some paper types need to pass through the secondary fixing assembly after passing through the primary fixing assembly to fix the toner securely. Pull out the secondary fixing unit to clear a paper jam inside the assembly.
3 Waste Toner Container Tray
Pull out this tray to replace the waste toner container.

4 Reverse Unit
Reverses paper and returns it to the marking engine when performing two-sided printing. This unit also reverses paper to output the printed side face up or down according to the Face Up/Face Down mode settings. Pull out the delivery/reverse unit to clear a paper jam inside the unit.
5 Decurler Unit
Corrects paper curling caused by heat. Pull out this unit to clear a paper jam inside the unit.

Parts and Their Functions

Control Panel (Upright Control Panel-F) OPTION

18
6

16 15 14

13 12 11 10

1 Processing/Data Indicator
Blinks green when the machine is performing operations, and maintains a steady green light when received data is stored in memory.
2 Error Indicator
Blinks or lights if there is an error in the machine. When the Error indicator blinks, follow the instructions that appear on the touch panel display. When the Error indicator maintains a steady red light, contact your local authorized Canon dealer.
3 Settings/Registration key
Press to register and specify settings.
4 Energy Saver key
Press to set the Energy Saver mode or Sleep mode. The mode activated after pressing the Energy Saver key can be selected beforehand. This key lights when the machine enters either mode. To reactivate the machine, press this key again.

5 Counter Check key
Press to display the copy and print count totals.
6 Numeric keys
Press to enter numerical values.
7 Clear key
Press to clear entered values or characters.
8 Main Power Indicator
Lights when the main power is turned ON.
9 Edit Pen
Use when operating the touch panel display, such as to enter characters.
10 Stop key
Press to stop a job in progress.
11 Start key
Press to start an operation, such as scanning or copying.

12 Reset key
Press to restore the standard settings of the machine.
13 ID (Log In/Out) key
Press to log in/out when a login service such as Department ID Management has been set.
14 Touch Panel Display
The settings screen for each function is shown on this display.
15 Brightness Adjustment Dial
Use to adjust the brightness of the touch panel display.
16 Volume Settings key
Press to display the screen to specify the audible tones.

17 Status Monitor/Cancel key
Press to check the status of jobs or to cancel print jobs. Also, press to check status of the machine, such as checking the amount of paper remaining.
18 Quick Menu key
Press to retrieve favorite functions stored in Quick Menu. Also, if you are using authentication, Quick Menu set for each individual user can be displayed.
19 Main Menu key
Press to return to the Main Menu screen, such as when you want to switch functions.

Setting the Energy Saver mode/Sleep mode to minimize energy consumption
You can save energy consumption by using the Energy Saver mode/Sleep mode when the machine is not being used for a prolonged period of time, such as a lunch time. To use these modes, press [Energy Saver] after pressing on the control panel. If the machine is idle for a certain period of time, the machine will enter the Sleep mode (Auto Sleep mode). For more information on the mode which activates after is pressed, and detailed information on the Auto Sleep mode, see the User’s Guide.
“Basic Operations” > “Energy Saving Features” in the User’s Guide

Status Monitor/Cancel Screen

If you press

, the Status Monitor/Cancel screen appears, and you can confirm the status of jobs and

consumables on this screen. By obtaining information, such as the completion time of the current job or the amount

of paper remaining, you can perform smooth printing operation without interruption.

Useful situations
· When you want to know the completion time of jobs · When you want to check the amount of paper remaining for efficient paper loading · When you want to cancel a job which is registered by mistake
[Job] screen
The [Job] screen enables you to check the status of jobs in the job list. On this screen, you can cancel a job in progress and change the order of waiting jobs to print your job prior to others.

[Paper] screen
You can check the paper information and the remaining amount of paper in all paper sources. You can also specify the paper type for each paper source in [Paper Settings].

[Toner/Other] screen
The remaining amount of toner is displayed in illustrations. You can also check the remaining amount of staples, the amount of punch waste, and the percentage of memory usage.

How to Turn ON the Main Power
This section explains how to turn ON the main power.
Turning ON the Main Power
Make sure that the power plug is firmly inserted into the power outlet, and the breaker is turned ON.
1 Open the main power switch cover. 2 Press the main power switch to the “|” side.
· The main power indicator on the control panel lights.
IMPORTANT
If you want to turn ON the main power again, wait for at least 10 seconds after the main power and the main power indicator are turned OFF.
NOTE
The response of the keys and buttons may not be optimal immediately after turning ON the main power of the machine.
12

Shutting Down the Machine

How to Turn ON the Main Power

Do not turn OFF the main power in the following situations
· When using the I-Fax function · When the message <Backing up stored data from the Remote UI…> is displayed · When operating scan or print function
1 Press .

2 Press [Shutdown].
· The main power indicator on the control panel turns OFF.
IMPORTANT
· The machine may take some time to completely shutdown. Do not unplug the power cord until the main power indicator of the machine is OFF.
· The machine may continue to operate during or after the shutdown process. Do not unplug the power cord until the device sounds stop. When the shutdown process completes, the main power switch of the machine switches to the ” ” side automatically.

Loading Paper

Load paper by following the procedure below. In this section, A4 custom size paper is used as an example.

Confirmation

Confirm the paper types that can be loaded.
“Basic Operations” > “Available Paper Stock” in the User’s Guide

Preparation

Operation

Load paper in the paper deck. “Loading Paper into the Paper Deck,” on p. 17

Registration

Specify the loaded paper size and type for the paper deck. “Registering Custom Paper Types,” on p. 20

Loading Paper

Paper Source
This section describes available paper sources. Paper that can be loaded differs, depending on the paper sources. The
following description includes the optional products as well as the standard paper decks. The optional products are
indicated with OPTION icon.

Long Sheet Tray-D
OPTION

Paper Deck of the Main Unit

POD Deck Lite-C
OPTION

Document Insertion Unit-N
OPTION

POD Deck-D/ Secondary POD Deck-D
OPTION

POD Deck Lite XL-A
OPTION

NOTE
For details on paper that can be loaded, see the User’s Guide.
“Basic Operations” > “Available Paper Stock” in the User’s Guide

Registering Paper Types in the Paper Database
Register all paper types you are going to use with this machine. You can register paper types by selecting paper types from the Paper Database.
NOTE
· If you load paper which is already registered in the machine, such as plain or recycled paper, this step is not necessary. Proceed to the next step “Loading Paper into the Paper Deck”.
· You cannot change the settings of the default paper types registered in the machine. If you edit the settings, make sure to duplicate and register them as a new one beforehand.
1 Press .
2 Press [Preferences] [Paper Settings] [Paper Type Management Settings].
3 Press [Paper Database].
4 Select the paper type from the list press [OK].
5 Confirm that the selected paper type is displayed in the <Paper Type Management Settings> screen press [OK]. · If the desired paper type is not listed in the Paper Database, select and duplicate a paper type that closely matches the characteristics of the desired paper type, and then change the necessary settings. “Paper Type Management” in the User’s Guide
16

Loading Paper

Loading Paper into the Paper Deck
1 Register the paper size for the paper deck at [Paper Settings] in [Preferences] (Settings/Registration).
“Settings/Registration” > “Preferences” > “Paper Settings” > “Registering the Paper Size and Type for a Paper Source” in the User’s Guide

2 1

2 Open the paper deck.
1 Press the button on the paper deck.
2 Pull out the paper deck until it stops.
· Check that the inside lifter descends to the paper loading position.
IMPORTANT
If the machine is in the Sleep mode (the touch panel is not displayed, and only is lit), you may be unable to open the paper deck. In this case, press to reactivate the machine, and then press the open button on the paper deck.

3 Squeeze the lever on the paper holder plate as shown below. Without releasing the lever, slide the paper holder plate until it does not catch on the paper to set.

4 Move the size change plates to a position where it does

not catch on the paper.

1 Remove the size change plates lock.

2 Slide the size change plates to a position where it does not catch

on the set paper.

2
2 1

5 Adjust the position of the size change plates to align with paper. 1 Set the paper of the target size to approximately 10 mm high. 2 Slide the size change plates (front) and size change plates (back) to match the paper size.
IMPORTANT
· Do not give a strong shock to the paper holder plate when loading paper into the paper deck, as this may result in a malfunction or damage to the machine.

· Adjust the guides correctly to avoid causing a paper jam, dirty prints, or making the inside of the machine dirty.
6 Lock the lever of the size change plate and fix it.
7 Squeeze the lever on the paper holder plate as shown below. Without releasing the lever, slide the paper holder plate to align it with the desired paper size.
8 Load all remaining paper into the paper deck.

Loading Paper
9 Change the paper deck’s size plate to match the new paper size.
10 Gently push the paper deck back into the machine until it clicks into place in the closed position. · The inside lifter automatically rises, and prepares the paper deck for printing. CAUTION When returning the paper deck to its original position, be careful not to get your fingers caught, as this may result in personal injury.
NOTE
· Make sure to fan the paper stack, and align the edges before loading paper. · Curled paper must be straightened out prior to use. · Make sure that the height of the paper stack does not exceed the loading limit mark ( ). · When loading pre-punched paper, transparencies/clear film, and tab paper, make sure to load paper in an
appropriate orientation as the paper orientation differs, depending on the paper source. · If there are instructions on the package of paper about which side of the paper to load, follow those instructions. · When the paper is loaded into the paper deck, the side facing down is the one printed on. · If problems occur, such as poor print quality or paper jams, try turning the paper stack over, and reload it. However,
you cannot turn the 1-Sided Coated paper over. Change to the new paper. · For more information on the print direction of preprinted paper (paper which has logos or patterns already printed
on it), see the User’s Guide. · When loading paper, make sure that the height of the paper stack does not exceed 20 mm. If the height of the
paper stack exceeds 20 mm, the edges of the paper stack may become curled or creased, and poor print quality may result.
“Maintenance” > “Loading Paper” in the User’s Guide “Copy” > “Appendix” in the User’s Guide
19

Registering Custom Paper Types
You can register the paper size and type for each paper source.
1 Press . 2 Press [Preferences] [Paper Settings] [Paper Settings]. 3 Select the paper deck in which you loaded paper
press [Set].
4 Select the same paper type as the one you loaded press [Next]. · You can select the paper type from the simple or detailed setting screen. For paper types that are not displayed on the simple setting screen, press [Detailed Settings] select the paper type from the detailed setting screen.
Simple Settings Screen

Detailed Settings Screen

5 Select the same paper size as the one you loaded press [OK]. · If you load paper other than standard paper, select [Custom Size].
6 Confirm that the selected paper type and size are displayed in <Details of Selected Paper> press [OK].

Loading Paper

Cleaning and Maintenance
For optimum operation of the machine, we recommend to clean and check the machine regularly.
NOTE
The following cleaning should be performed only when the Duplex Color Image Reader Unit-M is attached. · Cleaning the Platen Glass · Cleaning the Original Scanning Area · Cleaning the Feeder · Automatic Feeder Cleaning
Cleaning the Platen Glass
If originals cannot be scanned properly, follow the cleaning procedure below. Clean with a cloth which is wrung after being dampened in water, and then clean with a soft and dry cloth. Use the provided glass cleaning cloth for simple cleaning.
1 Shutting down the machine.
“Shutting Down the Machine,” on p. 13
2 Clean the Platen Glass.
· Clean the platen glass and the underside of the feeder.
3 Turning on the main power.
“Turning ON the Main Power,” on p. 12
Cleaning the Original Scanning Area
If originals which are fed from the feeder cannot be scanned properly, follow the procedure below.
1 Press .
2 Press [Adjustment/Maintenance] [Maintenance] [Original Scanning Area Cleaning Method].
22

3 Follow the cleaning instructions on the touch panel display.

Cleaning and Maintenance

Cleaning the Feeder
If originals which are fed from the feeder become dirty, follow the cleaning procedure below. Clean with a cloth which is wrung after being dampened in water, and then clean with a soft and dry cloth. Use the provided glass cleaning cloth for simple cleaning.
1 Shutting down the machine.
“Shutting Down the Machine,” on p. 13
2 Pull the lever, and open the feeder cover.

3 Clean the rollers and surrounding areas of them inside

the feeder cover.

1 Clean the rollers. 2 Clean the surrounding areas of the rollers (if they are very dirty).

IMPORTANT
Make sure that no trash such as pieces of paper gets into the groove of the multiple sheet feed detection sensor. If trash does get in, remove it using a soft cloth.
2

4 Gently close the feeder cover.

5 Clean the original scanning area.
· Open the feeder and clean the original scanning area (thin glass strip).

6 Open the document scan cover.

1 Pull the lever above the feeder.

2 Open the document scan cover.

7 Open the inside cover.

Wipe the thin glass strip area.

8 Clean the original scanning area of the feeder.

9 Close the inside cover and document scan cover in order, and then close the feeder.
10 Turning on the main power.
“Turning ON the Main Power,” on p. 12

Cleaning and Maintenance
Automatic Feeder Cleaning
If originals which are fed from the feeder become dirty, follow the procedure below.
1 Place 10 sheets of blank paper into the feeder.
· Use A4 plain paper.
2 Press . 3 Press [Adjustment/Maintenance] [Maintenance] [Clean Feeder]. 4 Press [Start].
Cleaning the Inside of the Main Unit
If output paper becomes dirty, follow the procedure below.
1 Press . 2 Press [Adjustment/Maintenance] [Maintenance] [Clean Inside Main Unit]. 3 Press [Start].
NOTE
Similarly perform [Adjustment/Maintenance] [Maintenance] [Clean Wire] and [Adjustment/Maintenance] [Maintenance] [Clean Roller].
25

Refreshing the Fixing Roller
If streaks appear on the output paper, or gloss unevenness occurs in the high density area of the printed heavy paper, follow the procedure below.
IMPORTANT
This function is displayed only if the settings are made available by your local authorized Canon dealer. Even if this function is displayed, do not allow anyone to change the settings except for the system manager. For more information on changing the settings, contact your local authorized Canon dealer.
1 Press . 2 Press [Adjustment/Maintenance] [Maintenance] [Refresh Fixing Roller]. 3 Press [Start].
NOTE
The fixing roller is refreshed automatically every several sheets of paper is printed. You can adjust the refresh frequency and time in [Fixing Roller Auto Refresh Level].
Cleaning the Touch Panel Display
Wipe the touch panel display with a cloth dampened in water or a mild cleaning agent, and then wipe with a soft, dry cloth.
26

Consumables
The following consumables are available for this machine. For more information, contact your local authorized Canon dealer. For information on using and storing consumables, see “Consumables,” on p. 35.
Paper
In addition to plain paper, other types of paper stock are available, such as recycled paper, color paper, transparencies/ clear film (recommended for this machine)/translucent film (recommended for this machine), and labels. For highquality printouts, use paper recommended by Canon.
Toner
If a message prompting you to replace the toner cartridge appears on the touch panel display, replace the used toner cartridge with a new one. For information on how to replace the toner cartridge, see the User’s Guide. For optimum print quality, using Canon genuine toner is recommended.
“Maintenance” > “Replacing the Toner Cartridge” in the User’s Guide
Supported Canon Genuine Toner
Canon imagePRESS Toner T02 Black Canon imagePRESS Toner T02 Cyan Canon imagePRESS Toner T02 Magenta Canon imagePRESS Toner T02 Yellow
Be careful of counterfeit toners
Please be aware that there are counterfeit Canon toners in the marketplace. Use of counterfeit toner may result in poor print quality or machine performance. Canon is not responsible for any malfunction, accident or damage caused by the use of counterfeit toner. For more information, see global.canon/ctc.
27

Staple Cartridge for the Stapler Unit
The Staple-N1 can be attached to the Finisher-AN/Saddle Finisher-AN for stapling. For information on how to replace the staple cartridge, see the User’s Guide.
“Maintenance” > “Replacing the Staple Cartridge (For Optional Products)” > “Replacing the Staple Cartridge in the Stapler Unit (Finisher-AN/Saddle Finisher-AN)” in the User’s Guide.

Staple-N1

Staple Cartridge for the Saddle Stitcher Unit
The Staple-P1 can be attached to the Saddle Finisher-AN for saddle stitching. For information on how to replace the staple cartridge, see the User’s Guide.
“Maintenance” > “Replacing the Staple Cartridge (For Optional Products)” > “Replacing the Staple Cartridge in the Saddle Stitcher Unit (Saddle Finisher-AN)” in the User’s Guide.

Staple-P1

Genuine Consumables
Canon continuously develops technology innovations in Canon manufactured Toner, Cartridge, and Parts, specifically designed for use in Canon Multi-Functional machines. Experience the benefits of optimal print performance, print volume and high quality outputs, achieved through Canon’s new advanced technologies. Therefore, the use of Canon genuine consumables is recommended for your Canon Multi-Functional machines.

Troubleshooting
This section explains how to solve problems when paper jam occurs frequently or error messages are displayed. For information on the detailed procedures and precautions, see the User’s Guide.
“Problem Solving” in the User’s Guide
Clearing Paper Jams and Staple Jams
If a paper jam or staple jam occurs, follow the instructions displayed on the touch panel display to clear the jam. If you press [Close], you can continue operations, such as scanning originals, even if the jammed paper is not removed.

Paper Jam screen The location of a paper jam is displayed with animations.

Staple Jam screen The location of a staple jam and procedures for clearing the jam are displayed.

Reducing the Frequency of Paper Jams
If paper jams occur frequently, the following reasons may be the cause.
There are torn pieces of paper left inside the machine.
As a result of pulling jammed paper out by force, torn pieces of paper may be left inside the machine. Remove all of the torn pieces.
Paper which does not match with the setting is loaded.
Make sure that the paper loaded in the paper drawer matches the paper size and type registered in [Paper Settings] in [Preferences]. “Registering Custom Paper Types,” on p. 20
Paper jams occur frequently only when using the specific custom paper.
The paper information may be registered incorrectly. Confirm the paper information settings for the paper you are using.
“Paper Type Management” in the User’s Guide

When an Error Message Is Displayed
If a malfunction occurs and the machine cannot operate normally, a screen shown on the right appears. If the machine cannot operate normally after turning the main power OFF and then ON, contact your local authorized Canon dealer.
“Contacting Your Local Authorized Canon Dealer,” on p. 31
If a key for the Limited Functions mode is displayed:
If [Limited Functions Mode] is displayed, you can temporally set the Limited Functions mode to continue to use some functions.
“Problem Solving” > “Service Call Message” in the User’s Guide
If a message is displayed on the bottom of the screen:
If an error message appears on the bottom of the screen, printing and scanning functions are restricted, but some functions may still be available.
“Problem Solving” > “Service Call Message” in the User’s Guide
30

Troubleshooting
Contacting Your Local Authorized Canon Dealer
If you cannot operate the machine normally after turning the main power OFF and then ON, contact your local authorized Canon dealer by following the procedure below.
1 Note the error code.
· Write down the error code “EXXXXXX-XXXX-XX”.
2 Turn OFF the main power.
· Press [Shutdown] on the touch panel display.
3 Remove the power plug from the power outlet. 4 Confirm the product name, and contact your local authorized Canon dealer.
31

If Memory Becomes Full
If memory becomes full during scanning, the following messages appear on the touch panel display. Follow the
procedures on the screen, and then delete unnecessary files stored in the Mail Box and Fax/I-Fax Inbox to make more
memory available.

Scanning will be canceled because the memory is full. Do you want to print (send, store)* the scanned pages?
* A part of the message differs, depending on the function used.

[Yes]: [No]:

A job for the pages scanned into memory is processed. After processing the job, scan the remaining pages. A job for the pages scanned into memory is canceled. Scan the whole pages again.

Scanning will be canceled because the memory is full. Wait a moment, then try again. [OK]: Scan the whole pages again after the current operation is complete.
Could not perform the operation because the memory is full. [OK]: Delete unnecessary data from memory, and then scan the whole pages again.

If the Main Power Does Not Turn ON
If the machine cannot operate when the main power is turned ON, check the breaker. If the breaker is switched to the OFF position, do not attempt to turn ON the breaker yourself, and be sure to contact your local authorized Canon dealer.

“Maintenance” > “Routine Cleaning” > “Inspection of the Breaker” in the User’s Guide
32

Appendix

Important Safety Instructions
This chapter describes important safety instructions for the prevention of injury to users of this machine and others, and damage to property. Read this chapter before using the machine, and follow the instructions to use the machine properly. Do not perform any operations not described in this manual. Canon will not be responsible for any damages resulting from operations not described in this manual, improper use, or repair or changes not performed by Canon or a third party authorized by Canon. Improper operation or use of this machine could result in personal injury and/or damage requiring extensive repair that may not be covered under your Limited Warranty.
WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings.
CAUTION Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always pay attention to these cautions.
IMPORTANT Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly and avoid damage to the machine or property.
Installation
To use this machine safely and comfortably, carefully read the following precautions and install the machine in an appropriate location.
WARNING
Do not install in a location that may result in a fire or electrical shock
· A location where the ventilation slots are blocked (too close to walls, beds, sofas, rugs, or similar objects)
· A damp or dusty location · A location exposed to direct sunlight or
outdoors · A location subject to high temperatures · A location exposed to open flames · Near alcohol, paint thinners or other
flammable substances
Other warnings · Do not connect unapproved cables to this machine. Doing so may result in a fire or electrical shock. · Do not place necklaces and other metal objects or containers filled with liquid on the machine. If foreign substances come in contact with electrical parts inside the machine, it may result in a fire or electrical shock. · If any foreign substance falls into this machine, unplug the power plug from the AC power outlet and contact your local authorized Canon dealer.

CAUTION
Do not install in the following locations The machine may drop or fall, resulting in injury.
· An unstable location · A location exposed to vibrations
Other cautions · Do not connect any unauthorized optional products to the outlet for connecting optional products, as this could result in a fire or smoke. · When disconnecting the power cord, wait at least 5 seconds before connecting the power cord again. · Excessive voltage drop may cause a malfunction or loss of data in the machine and computers.
Leveling feet (only for products with leveling
feet) Do not remove the machine’s leveling feet after the machine has been installed, as this may cause the machine to fall or tip over, resulting in personal injury.
IMPORTANT
Do not install in the following locations
Doing so may result in damage to the
machine. · A location subject to temperature and humidity extremes, whether low or high · A location subject to dramatic changes in temperature or humidity · A location near equipment that generates magnetic or electromagnetic waves · A laboratory or location where chemical reactions occur · A location exposed to corrosive or toxic gases · A location that may warp from the weight of the machine or where the machine is liable to sink (a carpet, etc.)
Avoid poorly ventilated locations This machine generates a slight amount of ozone and other emissions during normal use. These emissions are not harmful to health. However, they may be noticeable during extended use or long production runs in poorly ventilated rooms. To maintain a comfortable working environment, it is recommended that the room where the machine operates be appropriately ventilated. Also avoid locations where people would be exposed to emissions from the machine.
Do not install in a location where
condensation occurs Water droplets (condensation) may form inside the machine when the room where the machine is installed is heated rapidly, and when the machine is moved from a cool or dry location to a hot or humid location. Using the machine under these conditions may result in paper jams, poor print quality, or damage to the machine. Let the machine adjust to the ambient temperature and humidity for at least 2 hours before use.
Avoid installing the machine near computers
or other precision electronic equipment. Electrical interference and vibrations generated by the machine while printing can adversely affect the operation of such equipment.

Avoid installing the machine near televisions,
radios, or similar electronic equipment. The machine might interfere with sound and picture signal reception. Insert the power plug into a dedicated power outlet, and maintain as much space as possible between the machine and other electronic equipment.
In altitudes of above sea level 3,000 m or
higher Machines with a hard disk may not operate properly when used at high altitudes of about 3,000 meters above sea level, or higher.
If the operating noise concerns you Depending on the use environment and operating mode, if the operating noise is of concern, it is recommended that the machine be installed in a place other than the office.
Moving the Machine If you intend to move the machine, even to a location on the same floor of your building, contact your local authorized Canon dealer beforehand. Do not attempt to move the machine yourself.
Power Supply
WARNING
· Use only a power supply that meets the specified voltage requirements. Failure to do so may result in a fire or electrical shock.
· The machine must be connected to a socket-outlet with grounding connection by the provided power cord.
· Do not use power cords other than the one provided, as this may result in a fire or electrical shock.
· The provided power cord is intended for use with this machine. Do not connect the power cord to other devices.
· Do not modify, pull, forcibly bend, or perform any other act that may damage the power cord. Do not place heavy objects on the power cord. Damaging the power cord may result in a fire or electrical shock.
· Do not plug in or unplug the power plug with wet hands, as this may result in an electrical shock.
· Do not use extension cords or multi-plug power strips with the machine. Doing so may result in a fire or electrical shock.
· Do not wrap the power cord or tie it in a knot, as this may result in a fire or electrical shock.
· Insert the power plug completely into the AC power outlet. Failure to do so may result in a fire or electrical shock.
· Remove the power plug completely from the AC power outlet during a thunder storm. Failure to do so may result in a fire, electrical shock, or damage to the machine.
· Make sure that the power supply for the machine is safe, and has a steady voltage.
· Keep the power cord away from a heat source; failure to do this may cause the power cord coating to melt, resulting in a fire or electrical shock.
Avoid the following situations: If excessive stress is applied to the connection part of the power cord, it may damage the power cord or the wires inside the machine may disconnect. This could result in a fire.
· Connecting and disconnecting the power cord frequently.

· Tripping over the power cord. · The power cord is bent near the connection
part, and continuous stress is being applied to the power outlet or the connection part. · Applying excessive force on the power plug.
CAUTION
Install this machine near the power outlet and leave sufficient space around the power plug so that it can be unplugged easily in an emergency.
IMPORTANT
When connecting power · Do not connect the power cord to an uninterruptible power source. Doing so may result in malfunction of or damage to the machine at power failure. · If you plug this machine into an AC power outlet with multiple sockets, do not use the remaining sockets to connect other devices. · Do not connect the power cord to the auxiliary AC power outlet on a computer.
Other precautions Electrical noise may cause this machine to malfunction or lose data.
Handling
WARNING
· Immediately unplug the power plug from the AC power outlet and contact an authorized Canon dealer if the machine makes an unusual noise, emits an unusual smell, or emits smoke or excessive heat. Continued use may result in a fire or electrical shock.
· Do not disassemble or modify this machine. There are high-voltage and high-temperature components inside the machine. Disassembly or modification may result in a fire or electrical shock.
· Place the machine where children will not come in contact with the power cord and other cables or gears and electrical parts inside the machine. Failure to do so may result in unexpected accidents.
· Do not use flammable sprays near this machine. If flammable substances come into contact with electrical parts inside this machine, it may result in a fire or electrical shock.
· When moving this machine, be sure to turn OFF the power of this machine, and then unplug the power plug and interface cables. Failure to do so may damage the power cord or interface cables, resulting in a fire or electrical shock.
· When plugging or unplugging a USB cable when the power plug is plugged into an AC power outlet, do not touch the metal part of the connector, as this may result in an electrical shock.
If you are using a cardiac pacemaker This machine generates a low level magnetic flux and ultrasonic waves. If you use a cardiac pacemaker and feel abnormalities, please move away from this machine and consult your physician immediately.
CAUTION
· Do not place heavy objects on this machine as they may fall, resulting in injury.
· For safety, unplug the power plug if the machine will not be used for a long period of time.

· Use caution when opening and closing covers to avoid injury to your hands.
· Keep hands and clothing away from the rollers in the output area. If the rollers catch your hands or clothing, this may result in personal injury.
· The inside of the machine and the output slot are very hot during and immediately after use. Avoid contact with these areas to prevent burns. Also, printed paper may be hot immediately after being output, so use caution when handling it. Failure to do so may result in burns.
· Do not use the machine in a location where there may be children.
Feeder · Do not press down hard on the feeder when using the platen glass to make copies of thick books. Doing so may damage the platen glass and result in personal injury. · Close the feeder gently to avoid catching your hands, as this may result in personal injury. · Be careful not to put your hands or fingers into the feeder. Otherwise, you may be injured.
Finisher · Do not place your hands in the part of the tray where stapling is performed (near the rollers), especially pay careful attention to the sharp staples, as this may result in personal injury.
Paper drawer · Do not insert your hand into the machine while the paper drawer is removed, as this may result in personal injury.
Energy Saver key · Press (Energy Saver) for safety when the machine will not be used for a long period of time, such as overnight. Also, turn OFF the main power switch, and disconnect the power cord for safety when the machine will not be used for an extended period of time, such as during consecutive holidays.
Laser Safety This product is confirmed as a Class 1 laser product in IEC60825-1:2014 and EN60825-1:2014.
CLASS 1 LASER PRODUCT LASER KLASSE 1 APPAREIL À LASER DE CLASSE 1 APPARECCHIO LASER DI CLASSE 1 PRODUCTO LÁSER DE CLASE 1 APARELHO A LASER DE CLASSE 1 LUOKAN 1 LASER-TUOTE LASERPRODUKT KLASS 1
The laser beam can be harmful to human bodies. Since radiation emitted inside the product is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation. Read the following remarks and instructions for safety.

· Never open covers other than those instructed in the manuals for this machine.
· If the laser beam should escape and enter your eyes, exposure may cause damage to your eyes.
· Use of controls, adjustments, or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.
Laser Safety Caution
Fixing Unit When removing jammed paper or when inspecting the inside of the machine, do not expose yourself to the heat emitted from the fixing unit and its surroundings for a prolonged period of time. Doing so may result in low temperature burns, even though you did not touch the fixing unit and its surroundings directly.

Appendix

IMPORTANT
· Follow the caution instructions on labels and the like found on this machine.
· Do not subject the machine to strong shocks or vibration.
· Do not forcibly open and close doors, covers, and other parts. Doing so may result in damage to the machine.
· Do not turn the main power switch OFF or open the covers while the machine is in operation. This may result in paper jams.
· Use a modular cable that is shorter than 3 meters.
· Use a USB cable that is shorter than 3 meters.
Safety-Related Symbols
Power switch: “ON” position
Power switch: “OFF” position
Power switch: “STAND-BY” position
Push-push switch “ON” “OFF”
Protective earthing terminal
Dangerous voltage inside. Do not open covers other than instructed.
CAUTION: Hot surface. Do not touch.
Class II equipment
Moving parts: Keep body parts away from moving parts
CAUTION: An electrical shock may occur. Remove all the power plugs from the power outlet.
There are sharp edges. Keep body parts away from sharp edges.
[NOTE] Some of symbols shown above may not be affixed depending on the product.
Maintenance and Inspections
Clean this machine periodically. If dust accumulates, the machine may not operate properly. When cleaning, be sure to observe the following. If a problem occurs during operation, see “Problem Solving” in the User’s Guide.
WARNING
· Before cleaning, turn OFF the power and unplug the power plug from the AC power outlet. Failure to do so may result in a fire or electrical shock.
· Unplug the power plug periodically and clean with a dry cloth to remove dust and grime. Accumulated dust may absorb humidity in the air and may result in a fire if it comes into contact with electricity.
· Use a damp, well wrung-out cloth to clean the machine. Dampen cleaning cloths with water only. Do not use alcohol, benzine, paint thinner, or other flammable substances. Do not use tissue paper or paper towels. If these substances come into contact with electrical parts inside the machine, they may generate static electricity or result in a fire or electrical shock.
· Check the power cord and plug periodically for damage. Check the machine for rust, dents, scratches, cracks, or excessive heat generation. Use of poorly-maintained equipment may result in a fire or electrical shock.

CAUTION
· The inside of the machine has hightemperature and high-voltage components. Touching these components may result in burns. Do not touch any part of the machine that is not indicated in the manual.
· When loading paper or removing jammed paper, be careful not to cut your hands with the edges of the paper.
Consumables
WARNING · Do not throw toner cartridges or waste toner
containers into open flame, or do not store them or printing/copy paper in a place exposed to open flame. This may cause them to ignite, resulting in burns or fire. · If you accidentally spill or scatter toner, carefully gather the toner particles together or wipe them up with a soft, damp cloth in a way that prevents inhalation. Never use a vacuum cleaner that does not have safeguards against dust explosions to clean up spilled toner. Doing so may cause a malfunction in the vacuum cleaner, or result in a dust explosion due to static discharge.
CAUTION · Keep toner and other consumables out of
the reach of small children. If these items are ingested, consult a physician immediately. · If toner touches your clothes or skin, wash it away with water immediately. Do not use warm water, as this may cause toner to fix, resulting in a permanent stain. · Do not dismantle the toner cartridge, as doing so may cause toner to fly out and enter your eyes or mouth. If toner gets into your eyes or mouth, wash them immediately with cold water and immediately consult a physician. · If toner escapes from the toner cartridge, make sure not to ingest the toner or allow it to directly touch your skin. If toner touches your skin, wash it away with soap and water. If your skin still feels irritated after washing it or you ingest toner, consult a physician immediately. · When pulling out the waste toner container, be careful not to let it fall. This may result in injury.
IMPORTANT · Store toner cartridges in a cool location,
away from direct sunlight.
Notice
Product Name Safety regulations require the product’s name to be registered. In some regions where this product is sold, the following name(s) in parentheses ( ) may be registered instead.
imagePRESS C10010VP / C9010VP (F174000)

EMC requirements of EC Directive This equipment conforms with the essential EMC requirements of EC Directive. We declare that this product conforms with the EMC requirements of EC Directive at nominal mains input 230 V, 50 Hz although the rated input of the product is 220 to 240 V, 50/60 Hz. Use of shielded cable is necessary to comply with the technical EMC requirements of EC Directive.
· Equipment complying with IEC 61000-3-12
WARNING
· This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
EU WEEE and Battery Directives You can see the WEEE and Battery Directives information in the latest User’s Guide (HTML manual) from the Canon website (https://oip.manual.canon/).
E-Waste Rules
India only This product is not to be disposed of with your household waste, according to the E-Waste (Management) Rules, 2016. This product should be handed over to a designated collection point, e.g., to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information regarding return and recycling of WEEE products, please visit http://www.canon.co.in/ environment or write to us at
Also, this product complies with the “E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 % by weight and 0.01 % by weight for Cadmium, except for the exemptions set in Schedule II of the Rule.

Legal Limitations on the Usage of Your Product and the Use of Images
Using your product to scan, print or otherwise reproduce certain documents, and the use of such images as scanned, printed or otherwise reproduced by your product, may be prohibited by law and may result in criminal and/or civil liability. A non-exhaustive list of these documents is set forth below. This list is intended to be a guide only. If you are uncertain about the legality of using your product to scan, print or otherwise reproduce any particular document, and/or of the use of the images scanned, printed or otherwise reproduced, you should consult in advance with your legal advisor for guidance.
· Paper Money · Travelers Checks · Money Orders · Food Stamps · Certificates of Deposit · Passports · Postage Stamps (canceled or uncanceled) · Immigration Papers · Identifying Badges or Insignias · Internal Revenue Stamps (canceled or
uncanceled) · Selective Service or Draft Papers · Bonds or Other Certificates of Indebtedness · Checks or Drafts Issued by Governmental
Agencies · Stock Certificates · Motor Vehicle Licenses and Certificates of
Title · Copyrighted Works/Works of Art without
Permission of Copyright Owner
Disclaimers · The information in this document is subject to change without notice. · CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE, OR NON-INFRINGEMENT. CANON INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.

About This Manual
Screens Screens of the touch panel display used in this manual are those taken when the imagePRESS C10010VP has the following optional equipment attached to it:
· Two-Knife Booklet Trimmer-A · Booklet Trimmer-F · Saddle Finisher-AN · Puncher Unit-BT · Paper Folding Unit-J · High Capacity Stacker-H · Perfect Binder-E · Document Insertion Unit-N · Duplex Color Image Reader Unit-M · POD Deck-D · Upright Control Panel-F Note that functions that cannot be used depending on the model or options do not appear on the touch panel display. Illustrations Illustrations used in this manual are those displayed when the imagePRESS C10010VP has the following optional equipment attached to it: · Duplex Color Image Reader Unit-M · Upright Control Panel-F · Saddle Finisher-AN
If your machine is of the model dedicated to printing only The machine dedicated to printing only cannot be used for any other functions than printing. Although this Guide contains the descriptions of the functions and operations for copying, faxing, and scanning as well as printing, please read only the necessary descriptions to use your machine. Trademarks QR Code is a trademark of DENSO WAVE INCORPORATED. All brand names and product names appearing on this manual are registered trademarks or trademarks of their respective owners.

Third Party Software
This Canon product (the “PRODUCT”) includes third-party software modules. Use and distribution of these software modules, including any updates of such software modules (collectively, the “SOFTWARE”) are subject to license conditions (1) through (9) below. (1) You agree that you will comply with any
applicable export control laws, restrictions or regulations of the countries involved in the event that this PRODUCT including the SOFTWARE is shipped, transferred or exported into any country. (2) Rights holders of the SOFTWARE retain in all respects the title, ownership and intellectual property rights in and to the SOFTWARE. Except as expressly provided herein, no license or right, expressed or implied, is hereby conveyed or granted by rights holders of the SOFTWARE to you for any intellectual property of rights holders of the SOFTWARE. (3) You may use the SOFTWARE solely for use with the PRODUCT. (4) You may not assign, sublicense, market, distribute, or transfer the SOFTWARE to any third party without prior written consent of rights holders of the SOFTWARE. (5) Notwithstanding the foregoing, you may transfer the SOFTWARE only when (a) you assign all of your rights to the PRODUCT and all rights and obligations under the license conditions to transferee and (b) such transferee agrees to be bound by all these conditions. (6) You may not decompile, reverse engineer, disassemble or otherwise reduce the code of the SOFTWARE to human readable form. (7) You may not modify, adapt, translate, rent, lease or loan the SOFTWARE or create derivative works based on the SOFTWARE. (8) You are not entitled to remove or make separate copies of the SOFTWARE from the PRODUCT. (9) The human-readable portion (the source code) of the SOFTWARE is not licensed to you.
Notwithstanding (1) through (9) above, the PRODUCT includes third-party software modules accompanying the other license conditions, and these software modules are subject to the other license conditions. Please refer to the other license conditions of third-party software modules described in Appendix of Manual for the corresponding the PRODUCT. This Manual is available at https://oip.manual.canon/.

By using the PRODUCT, you shall be deemed to have agreed to all applicable

Download

Canon imagePRESS C10010VP/C9010VP User Guide

Was this manual helpful?