Dell T340 EMC PowerEdge User Guide
DELL EMC PowerEdge T340
Getting Started Guide
Before you begin
Setting up your system
- Extend the system feet
- Connect the network cable and the optional I/O devices
- Connect the system to the power source
- Loop and secure the power cable using the retention strap
- Turn on the system
Technical specifications
The following specifications are only those required by law to ship with your system. For a complete and current listing of the specifications for your system, see Dell.com/poweredgemanuals.
Power supply | Wattage at 100–240 V | Derated Wattage at 100–120 V – Low Line |
495 W Platinum AC 50/60 Hz, 6.5 A–3 A 350 W Bronze AC 50/60 Hz, 5.5 A–3 A |
495 W 350 W |
NA NA |
System battery: 3 V CR2032 lithium coin cell
Temperature: Maximum ambient temperature for continuous operation: 35°C/95°F
For information about Dell Fresh Air and supported expanded operating temperature range, see the Installation and Service Manual at Dell.com/poweredgemanuals.
Dell End User License Agreement
Before using your system, read the Dell Software License The agreement shipped with your system. If you do not accept the terms of the agreement, see Dell.com/contactdell.
Regulatory model/type | E60S Series/E60S001 |
Quick Resource Locator
Scan to see how-to videos, documentation, and troubleshooting information.
© 2018 Dell Inc. or its subsidiaries.
P/N RKCKK
Rev. A00
2018-12