Dell S2319H Monitor Teardown Instructions
Mechanical Instruction
1.1Disassembly Procedures
Tools: 2 Power screwdrivers (φ=5mm, L=60mm); 1 small cross screwdriver; turnbuckle driver; Setting: Power screwdriver torque A=6 kgF.Cm
1.2. Product material information
The following substances, preparations, or components should be disposed of or recovered
separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC.
Capacitors / condensers (containing PCB/PCT) | No used |
Mercury-containing components | No used |
Batteries | No used |
Printed circuit boards (with a surface greater than 10 square cm) | The product has printed circuit boards (with a surface greater than 10 square cm) |
The component contains toner, ink, and liquids | No used |
Plastic containing BFR | No used |
Component and waste contain asbestos | No used |
CRT | No used |
Component contain CFC, HCFC, HFC and HC | No used |
Gas discharge lamps | No used |
LCD display > 100 cm2 | The product has an LCD greater than 100 cm2 |
External electric cable | The product has external cables |
The component contains refractory ceramic fibers | No used |
Component contains radioactive substances | No used |
Electrolyte capacitors (height > 25mm, diameter > 25mm) | Product has electrolyte capacitors (height > 25mm, diameter > 25mm) |
1.3. Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
Tool Description:
‐ Screwdriver (Phillip-head, Hexagonal head)
‐ Penknife
‐ Soldering iron and absorber
Was this manual helpful?
Thank you for your feedback!