Sony MDR-E9LP In Ear Stereo Headphones Instruction Manual
SONY MDR-E9LP In Ear Stereo Headphones Instruction Manual
Stereo headphones
Feature
300 kJ/m3 high power neodymium magnet is used to reproduce powerful bass sound.
Specifications
Type: Open air, dynamic / Driver units: 13.5 mm (CCAW), dome type / Power handling capacity: 100 mW (IEC*) /Impedance: 16 Ω at 1 kHz / Sensitivity: 104 dB/mW /
Frequency response: 18 Hz – 22,000 Hz / Cable: Approx. 1.2 m (47.25 in), Y-type / Plug: L-shaped stereo mini plug / Mass: Approx. 6 g (0.22 oz.) without cable / Supplied accessories: Earpads (2)
* IEC = International Electrotechnical Commission Design and specifications are subject to change without notice.
Replacement parts: earpads
Please consult your nearest authorized Sony retailer or www.sony.com for information about replacement parts.
Precautions
- High volume may adversely affect your hearing.
- Do not use the unit while walking, driving, or cycling. Doing so may cause traffic accidents.
- Do not use in hazardous areas unless the surrounding sound can be heard.
- There is a danger that small parts may be swallowed. After use, store in a location out of reach of small children.
- Do not put weight or pressure on the headphones as it may cause the headphones to deform during long storage.
- The earpads may deteriorate due to long-term storage or use.
Note about static electricity
If you use the unit when the air is dry, you may experience discomfort due to static electricity accumulated on your body. This is not a malfunction of the unit. You can reduce the effect by wearing clothes made of natural materials that do not easily generate static electricity.
How to use
Wear the earpiece marked R in your right ear and the one marked L in your left ear.
There is a tactile dot on the unit marked to distinguish the left side.
If the headphones do not fit your ears, put on the supplied earpads.
