Sony KD-X7050 Series User Guide
SONY KD-X7050 Series
Dismantling information for use by professional recyclers
Model
KD-43X7052
KD-43X7053
KD-43X7055
Conditions of Use:
(1) Please use this information only for the purpose of repair and recycling of Sony products. Using this information for any purpose other than the purpose described foregoing is forbidden.
(2) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part without the prior written permission of the author.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is upto-date before using it.
MODEL LIST
MODEL | REMOTE | DESTINATION |
KD-43X7052 | RMT-TX300E | UKA |
KD-43X7053 | RMT-TX300E | UKA |
KD-43X7055 | RMT-TX300E | CEI |
TOOLS & EQUIPMENTS
LIST OF ITEMS TO BRING
- Screwdriver (e.g. #2 Phillips Screwdriver)
- Multimeter
- ESD Wrist Straps
- Metal Washer (Flat) or Coin (for remove Rear Cover)
- Ruler (for remove Rear Cover)
OPTIONAL EQUIPMENT
- Screwdriver (e.g. #0 Phillips Screwdriver)
- Parts Tray for loose screws and small items
- Flashlight
For Surface Mounted Parts/Connectors;
Hot-Air Type soldering Iron is needed.
Thickness: approx. 1.5mm
Diameter: 20~25mm
Ruler: (L=50mm)
Plastic or Metal (In case of Metal ruler, wrap in tape (L=50mm) for prevent scratches)
DISSASSEMBLY AND REMOVAL CAUTION
SECTION1
1) Rear cover Disassemble and Re-assemble Method
Reference |
43″ |
49″ |
Screw Type |
12 |
13 |
4-167-0 19-22 | |
2 |
2 |
7-685-647-79 |
* Rear Cover can be disassembled without removing stand
* Ensure all screws are removed before removing rear cover
2) Unhook rear cover from bezel
3) Remove rear cover
Sharp Edge Information
Caution Point:
Please wear glove while removing rear cover to avoid sharp edge at bottom area as shown in figure below.
EXPLODED VIEW
Connectors
REF. NO | PART NO. | DESCRIPTION | REMARKS |
80 | 1-910-806-10 | CONNECTOR ASSY 30P | CN5500(BB9)-CN3000(LD)(1) |
81 | 1-910-806-48 | HARNESS ASSY | CN9501(BB9)-CN203(SM)-CN001(HZI / CN3109(BB9)-SP(1) |
82 | 1-003-714-11 | FLEXIBLE FLAT CABLE 51P | CN9000(BB9)-TCON (1) |
83 | 1-912-077-11 | FLEXIBLE FLAT CABLE 5P | CN9500(BB9)-WIFI (1) |
Set Parts
REF. NO | PART NO. | DESCRIPTION | REMARKS | |
12 |
A-5018-137-A | LD4_SG2_ 43 MOUNT | Printed Circuit Board, incl. capacitors | |
15 | A-5015-143-A | COMPL_SVC_ BB9_SG2_EU_ADP | KD-43X7053/7055 | Printed Circuit Board, incl. capacitors |
15 | A-5015-145-A | COMPL_SVC_BB9_SG2_EU_ADP_DERI5 | KD-43X7052 | Printed Circuit Board, incl. capacitors |
17 | 1-001-519-11 | MOUNTED PWB E-T-CON (43) | Printed Circuit Board, incl. capacitors | |
18 |
A-5017-622-A | P-MOD (YS9S043HNG01)(! SERVICE) | Liquid Crystal Display |
Other Parts
PART NO. | DESCRIPTION | REMARKS | |
1-493-333-16 | AC ADAPTOR (100W) | External Power Supply | |
1-846-421-11 |
CORD SET, POWER-SUPPLY | KD-43X7052/7053 | Cable |
1-912-186-12 |
POWER SUPPLY CORD SET | KD-43X7055/7056 | Cable |
Sony Home Entertainment & Sound Products Inc.