NEC PX1005QL Laser Projector Installation Guide

Sharp NEC Display Solutions
PX1005QL Installation Guide
Desktop and Ceiling Mount
Rev 1.7

Product Description

Type:  1 chip DMD Reflection Type 0.66 in. TRP DMD
  DMD Resolution: 2716 x 1528 (16:9) WQXGA
Output Resolution:  3840 x 2160 (16:9) UHD
Fan Noise:  42 dB / 39dB @ 1 meter
Power Consumption: 1222W (max)
Dimensions:  19.7” (W) x 8.49” (H) x 23.0” (D)
Weight: 68.8  lbs. / 31.2kg
Brightness: 10,000 Lumens
BTU’s:  4166 BTU/hour

Network Ready, RJ45
Powered: Lens Shift, Horizontal & Vertical /Zoom/ Focus

Lens Specifications

NP39ML-4K: Throw Ratio: – 0.38:1 Screen Sizes: 85″-350″ Focal Length: 11.4mm
F/#: 1.85
Weight: 6.0Ibs. / 2.7kg
NP16FL-4K: Throw Ratio: – 0.76:1 Screen Sizes: 50″-300″ Focal Length: 11.6mm
F/#: 1.85
Weight: 3.3lbs. / 1.5kg
NP17ZL-4K: Throw Ratio: 1.24 – 1.78:1 Screen Sizes: 50″-300″ Focal Length: 18.7 – 26.5nnm
F/#: 1.85
Weight: 2.0Ibs. / 0.9kg
NP18ZL-4K: Throw Ratio: 1.71 – 2.25:1 Screen Sizes: 50-300″ Focal Length: 26.0 – 34.0nnnn
F/#: 1.70-1.90
Weight: 2.4Ibs. / 1.1kg
NP19ZL-4K: Throw Ratio: 2.20 -3.67:1 Screen Sizes: 50-300″ Focal Length: 32.9 – 54.2mm
F/#: 1.86 – 2.48
Weight: 1.9Ibs. / 0.84kg
NP2OZL-4K: Throw Ratio: 3.54 – 5.36:1 Screen Sizes: 50″-300″ Focal Length: 52.8 – 79.1 mm
F/#: 1.85-2.41
Weight: 2.2lbs. / 1.0kg
NP21ZL-4K: Throw Ratio: 5.25 – 8.28:1 Screen Sizes: 50″-300″ Focal Length: 78.5 -121.9mm
F/#: 1.85-2.48
Weight: 2.2lbs. / 1.0kg
NP31ZL-4K: Throw Ratio: 0.74 – 0.93:1 Screen Sizes: 50-300″ Focal Length: 11.3 -14.1 mm
F/#: 1.96-2.3
Weight: 3.1Ibs. / 1.4kg

Screen/Aspect Ratio

4:3, 16:9, and 16:10 screens are fully supported with proper aspect ratio control for both types of sources using NEC-developed scaling technology. Menu selections have settings for each screen type and aspect ratio control for each source type.
Notes

  • For screen sizes not indicated on the projection tables, use the formulas below.
    If the figures on the tables do not match the results of formulas, use the figures in the table.
  • Distances are in inches, for millimeters multiply by 25.4.
  • Distances may vary ±5%.

Formulas: 16:9 Aspect Ratio (UHD)

The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size varies. For proper projector placement, determine the image width for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plugin the image width for “W” in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on pages 2 and 3:
Projection Formulas:

NP16FL-4K: C = 0.794W – 1.85
NP17ZL-4K: C(Wide) = 1.269W – 2.091  ——  C(Tele) = 1.802W – 1.910
NP18ZL-4K: C(Wide) = 1.748W – 2.673  ——  C(Tele) = 2.290W – 2.633
NP19ZL-4K: C(Wide) = 2.241W – 3.150  ——  C(Tele) = 3.713W – 3.114
NP20ZL-4K: C(Wide) = 3.618W – 5.319  ——  C(Tele) = 5.434W – 5.299
NP21ZL-4K: C(Wide) = 5.412W – 11.622  —-  C(Tele) = 8.438W – 11.531
NP31ZL-4K: C(Wide) = 0.768W – 1.795  ——  C(Tele) = 0.953W – 1.705
NP39ML-4K: Ultra-Short Throw lens   (See page 3 for Formulas)

Definitions:
W = Image Width
H = Image Height (size)
C = Throw distance
16:9 Screen Formulas
W = H x 16/9
H = W x 9/16
Screen Diagonal = W x 18.358/16

Distance Chart

Screen Size (16:9)

Rear Lens Zoom Lenses
NP16FL-4K NP31ZL-4K NP17ZL-4K NP18ZL-4K NP19ZL-4K NP20ZL-4K

NP21ZL-4K

Diagonal

Width(W)

Height (H)

0.76:1 0.74-0.93:1 1.24-1.78:1 1.71-2.25-1 2.20-3.67:1 3.54-5.36:1 5.25-8.28:1

inches

inches inches inches inches inches inches inches inches

inches

30 26 15 18.9 18.3 23.2 31.1 45.2 43.0 57.2 55.4 94.0 89.3 136.8 129.9 209.1
59 51 29 39.0 37.7 47.3 63.2 90.8 87.2 115.1 112.1 187.8 180.7 274.1 266.7 422.4
67 58 33 44.5 43.1 53.9 72.0 103.3 99.4 131.1 127.7 213.7 206.0 312.0 304.4 481.2
70 61 34 46.6 45.1 56.4 75.3 108.0 104.0 137.1 133.6 223.4 215.4 326.2 318.6 503.3
83 72 41 55.6 53.8 67.2 89.7 128.4 123.8 163.0 159.0 265.5 256.4 387.8 379.9 598.9
106 92 52 71.5 69.2 86.3 115.1 164.6 158.8 208.9 203.9 339.9 328.9 496.7 488.4 768.0
110 96 54 74.3 71.8 89.7 119.6 170.8 164.9 216.9 211.7 352.9 341.5 515.7 507.2 797.4
126 110 62 85.3 82.5 102.9 137.3 196.0 189.3 248.8 242.9 404.6 392.0 591.4 582.7 915.1
133 116 65 90.2 87.2 108.8 145.0 207.0 199.9 262.8 256.6 427.3 414.1 624.6 615.7 966.6
159 139 78 108.2 104.6 130.4 173.8 247.8 239.6 314.7 307.4 511.4 496.1 747.7 738.4 1157.8
184 160 90 125.5 121.4 151.1 201.4 287.1 277.6 364.6 356.2 592.3 574.9 866.1 856.3 1341.6
202 176 99 137.9 133.4 166.1 221.3 315.3 305.1 400.5 391.4 650.6 631.6 951.4 941.2 1474.0
220 192 108 150.4 145.5 181.0 241.2 343.6 332.5 436.5 426.5 708.8 688.4 1036.6 1026.1 1606.4
263 229 129 180.1 174.2 216.7 288.8 411.1 398.0 522.3 510.5 848.0 824.0 1240.3 1228.9 1922.6
299 261 147 205.1 198.3 246.6 328.6 467.7 452.8 594.1 580.8 964.5         _ 937.5 1410.8 1398.7 2187.4

Formulas: 16:9 Aspect Ratio (UHD)

The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size varies. For proper projector placement,  determine the image width for the desired screen size. Use the Screen Formulas below to calculate all screen dimensions. Plugin the image width for “W” in the Projection formulas.
Refer to the diagrams and charts for popular screen sizes on pages 2 and 3:
Projection Formulas:
NP39ML-4K:

A=(0.348*W)-30.6
B=0.588*W
C=(0.348*W)+2.488
D=(0.284*W)-2.262
E=(0.284*W)+5.738
Definitions:
W = Image Width
H = Image Height (size)
C = Throw distance
16:9 Screen Formulas
W = H x 16/9
H = W x 9/16
Screen Diagonal = W x 18.358/16

NP39ML-4 Installation

Screen Size (16:9)

A B C D

E

Diagonal

Width(W)

Height (H)

inches inches inches inches inches inches inches

inches

107 93 52 2 55 35 24.2 32.2
113 98 55 4 58 37 257 33.7
130 113 64 9 67 42 29.9 37.9
137 119 67 11 70 44 31.6 39.6
164 143 80 19 84 52 38.3 46.3
189 165 93 27 97 60 44.5 52.5
208 181 102 32 107 66 49.2 57.2
226 197 111 38 116 71 53.7 61.7
270 235 132 51 138 84 64.6 72.6
300 261 147 60 154 93 72.0 80.0
350 305 172 76 179 109 84.4 92.4

Ceiling Mount Installation

Note: Lens Shift Feature is not available for the NP16F-4KL.This lens should only be used for “zero degrees”/” no offset” applications.

Lens Shift Adjustable Range

Lens Shift Range for Desktop and Ceiling Mount Application
The diagram below shows the location of the image position in the lens. The lens can be shifted within the shaded area as shown using the normal projection position as a starting point.
Note: The lens shift feature is not available with NP16FL-4K (rear lens).NP16FL-4K should be used only for “zero degrees” / no offset” applications.
Note: Projector is set out of the box at maximum lens shift, which is how it is depicted above. (W: width of the projected image, H: height of the projected image)

Cabinet Dimensions

The following diagrams show the cabinet dimensions for the PX1005QL.
Dimensions are in inches. For millimeters multiply by 25.4.
Note: Dimensions are below shown without a lens

Cabinet Dimensions

Optional Lens Dimensions

Ventilation Requirements

  • If there are walls on both sides of the projector :
  • If there’s a wall behind the projector :

Portrait Requirements

Reference drawings
The drawing showing the dimensional requirements is not an actual stand design drawing.
(Unit. mm)

Regulatory Labels

CAUTION
POSS48LY HAZARDOUS OPTICAL RADIATION EMITTED FROM THIS PRODUCT.
0O NOT STA£ AT OPERATING LAMP.
IT MAY BE HARMFUL TO THE EYES,
R4SK GROUP2 IC 62471.2006
COMPLIES WITH 21 CFR 1040.10
AND 1040,11 EXCEPT FOR DEVIATIONS
PURSUANT TO LASER NOTICE N, S0,
DATED JUNE 24, 2007
LASER RADA TON
AVOID DIRECT EYE EXPOSURE CLASS 3R LASER PRODUCT
WAVELENGTH: 450-460 nm
MAX. PULSE ENERGY 0,76ml
PULSE DURA TON 0.74 ms
I£GI£N 608251.200
CUA$$ 1 LASER PRODUCT
EC/EN 60825+1 2014
LASER APERTURE

Input Panel

Control Panel

PC Control Codes

Function Code Data
POWER ON 02H OOH OOH OOH OOH 02H
POWER OFF 02H 01H OOH OOH OOH 03H
INPUT SELECT HDMI 1 02H 03H OOH OOH 02H 01H A1H A9H
INPUT SELECT HDMI 2 02H 03H OOH OOH 02H 01H A2H AAH
INPUT SELECT DisplayPort 1 02H 03H OOH OOH 02H 01H A6H ASH
INPUT SELECT DisplayPort 2 02H 03H OOH OOH 02H 01 H A7H AFH
INPUT SELECT HDBaseT 02H 03H OOH OOH 02H 01H 20H 28H
INPUT 3G SDI1 02H 03H OOH OOH 02H 01H C4H CCH
INPUT 3G SDI2 02H 03H OOH OOH 02H 01H C5H CDH
INPUT 3G SDI3 02H 03H OOH OOH 02H 01H C6H CEH
INPUT 3G SDI4 02H 03H OOH OOH 02H 01H C7H CFH
INPUT SELECT SLOT 02H 03H OOH OOH 02H 01H ABH B3H
PICTURE MUTE ON 02H 10H OOH OOH OOH 12H
PICTURE MUTE OFF 02H 11H OOH OOH OOH 13H

Cable Connection

Communication Protocol:

Baud Rate:   38400 bps (for cable lengths longer than 20’, it is recommended changing to 9600 bps in the setup menu)
Data Length:   8 bits
Parity:  No Parity
Stop Bit:   One bit
X on/off:  None
Communications: Full duplex

PC Control Connector (D-Sub 9P)

Note 1: Pins 1, 4, 6, and 9 are used inside the projector.
Note 2: For long cable runs it is recommended to set communication speed within the projector to 9600 bps.
Note 3: Jumper “Request to Send” and “Clear to Send” together on both ends of the cable to simplify cable connection.

www.sharpnecdisplays.us
PX1005QL