Sony PlayStation Media Remote CFI-ZMR1 Instruction Manual
Media Remote
Precautions
Before using this product, carefully read this manual and any manuals for compatible hardware. Retain instructions for future reference.
Safety
- If a battery is leaking, do not touch the material from the leaking battery with bare hands.
–If a battery is leaking, stop using the product immediately and contact Customer Support.
–If the material gets into the eyes, immediately flush the eyes with clean water and seek medical attention. It may cause blindness.
–If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water. Consult your doctor if inflammation or soreness develops. - If a battery is leaking, immediately move the leaking battery away from fire. The material from the leaking battery or gas may ignite, causing fire or explosion.
- Do not place batteries in water or fire. Do not disassemble, heat, modify, or charge the batteries. Doing so may cause the batteries to leak or become damaged, which may lead to injury or burns.
- Use only specified batteries. Do not combine old and new, or different types of batteries.
Using batteries of different capacities may cause explosion or leakage, which may lead to injury or burns. - Insert batteries in the correct direction. Batteries can short-circuit when their positive and negative ends are reversed. This may cause batteries to overheat, explode, or leak, which may lead to injury or burns.
- Dispose of used batteries according to the battery manufacturer’s instructions or local regulations.
- Remove batteries when they have reached the end of their life, or when storing the media remote for an extended period of time. Leaving them in the remote may cause leakage due to battery over-discharge, which may lead to injury or burns.
- Keep the product out of the reach of small children.
Use and handling
- Do not allow liquid or small particles to get into the product.
- Do not touch the product with wet hands.
- Do not throw or drop the product or subject it to strong physical shock.
- Do not stand on or put objects on the product.
- Never disassemble or modify the product.
- Do not place this product on an unstable surface or leave it on the floor.
- The product and its parts are made from metal and plastic materials. When disposing of the product, follow local regulations for the proper disposal of such materials.
Cleaning
Follow the instructions below to help prevent the product exterior from deteriorating or becoming discolored.
- Wipe with a soft, dry cloth.
- Do not apply insecticides or other volatile substances.
- Do not place any rubber or vinyl materials on the product exterior for an extended period of time.
- Do not use solvents or other chemicals. Do not wipe with a chemically-treated cleaning cloth.
Storage conditions
- Do not expose the console or accessories to high temperatures, high humidity, or direct sunlight during operation, transportation, and storage.
- Do not leave the product in a car with the windows closed, particularly in hot weather.
- Do not expose the product to dust, smoke, or steam.
Set up your media remote
Turn on the power
- Press the PUSH button on the back of the media remote and remove the rear cover. Keep pressing the PUSH button until the lock disengages. PUSH button
- Insert batteries with their positive and negative ends pointing in the correct direction
- Replace the rear cover. Align the protruded part on the cover with the recessed part on the media remote, and then press until you hear a “click”.
When the battery charge runs low, the media remote may not operate properly or the distance you can operate the remote may be reduced. When this happens, replace both batteries with new ones.
Pair and set up your media remote
To use the media remote as a controller for your PlayStation®5 console as well as a TV remote, you’ll need to pair the remote with your console and then set up the remote with your compatible TV.
Go to the home screen on your PS5™ console and select
Hints
- One media remote can operate only one PS5 console.
- If you switch TVs, you’ll need to reconfigure the media remote’s settings.
- Be sure to always update your PS5 system software to the most recent version.
Hardware part names
A ) TV volume + button TV volume – button
B )
C ) TV power button
D )
E ) Directional buttons
F ) Enter button
G ) (back) button
G )
H )
I )
J ) Service launch buttons
K )
Hint
The TV volume + button and the
Specifications
Power source Size AA batteries (2 pcs)
External dimensions Approx. 45 × 145 × 26 mm (width × height × depth)
Mass Approx. 55 g (Without batteries)
Operating temperature 5 °C to 35 °C
Design and specifications are subject to change without notice.
Complies with
IMDA Standards
DB102988
“
“SONY” and “
© 2020 Sony Interactive Entertainment Inc.
