Philips Pluto AC0819 Air Purifier User Guide
PHILIPS Pluto AC0819 Air Purifier
Control
Display
Maintenance
Clean the surface of the filter
- Clean the surface of the filter every 4 weeks.
Replace filter when display shows
- Replace the NanoProtect Filter Series 2 (AC0819/AC0820: FY0194, AC0830: FY0293). Long press the
The filter may produce smell after being used for a while because of the absorption of indoor air. Remove the filter and place it where it has direct sunlight and ventilation for several hours. Re-install and try using it again. If the odor remains, please replace the filter.
Was this manual helpful?
Thank you for your feedback!