Sharp 4T-C65CK1X 4K HDR Android TV User Manual

4T-C65CK1X 4K HDR Android TV

>>
Please choose your favourite page from the content. If you want to close the operation manual, press the
(HOME) button. Also, if you want to return to the previously displayed page, press the (Back) button.

LED BACKLIGHT TV / MONITOR OPERATION MANUAL

<< Contents

1. Get started 1-1. Introduction – Remote Control Unit 1-7. Introduction of Android TVTM Entertainment Hub 1-9. Introduction of Android TV – What Android TV can do 1-9. Introduction of Android TV – Unique feature from SHARP 1-10. Initial setup 1-11. Software Updates via Over-The-Air (OTA) 1-12. Updating the TV’s Software
2. TV and Channel settings 2-1. How to tune the channel 2-1. Auto channel update 2-2. Hong Kong DTV channel setting 2-2. Hong Kong DTV menu setting 2-3. Channel settings-Programme edit 2-3. Channel settings-How to change Audio language and Soundtracks 2-3. Channel settings-How to enable Subtitle (Except Hong Kong) 2-4. Channel settings-How to launch EPG 2-5. Channel settings-How to change Audio channel 2-6. Channel settings-How to operate Parental controls 2-7. Teletext settings (DTV only) (Except Taiwan and Hong Kong) 2-7. Postal code (Indonesia only) 2-7. System information (Except Hong Kong)

3. Connection/External Devices 3-1. Network and Internet 3-4. Chromecast built-in compatible devices 3-4. Audio Devices 3-5. Bluetooth setup 3-6. USB
4. Smart Apps 4-1. The GoogleTM Assistant or Google Search 4-1. Google Play Store 4-1. Google Account setting 4-2. Keyboard 4-3. Unique feature from SHARP 4-4. Tools screen setting
5. Picture settings 5-1. Picture Mode (Changing Pic. Quality) 5-1. Configuring Picture settings 5-2. Configure advanced Picture settings 5-2. HDR related settings 5-3. Unique Picture setting from SHARP 5-4. Input settings
6. Sound settings 6-1. Audio Mode 6-1. Configuring Sound settings 6-2. Configure advanced Sound settings 6-2. Unique Sound setting from SHARP

7. Other 7-1. Sleep Timer 7-1. Switch Off Timer 7-1. No Signal Off 7-1. Screen saver 7-1. Storage 7-1. Accessibility 7-1. Auto sleep 7-1. Reset
8. Appendix 8-1. Troubleshooting 8-2. Troubleshooting – Error Message

<< Introduction
Remote Control Unit

>>
1 (POWER): Switch the TV power on or enter standby. 2 0-9: Set the channel. 3 AD/MPX: Select the sound multiplex mode and audio description. 4 External equipment operational buttons: Operate the external equipment. 5 INFO DTV: Display the programme information.
6 YouTube: Display the YouTubeTM screen. 7 NETFLIX: Display the NETFLIX screen. If you press the NETFLIX button when the TV is turned off, the TV turns on and the NETFLIX screen is displayed.
8 (Back): Return to the previous screen. 9 / / / , ENTER: Select a desired item on the screen. 10 INPUT: Select an input source. 11 VOL+/-: Set the volume.
12 (Mute): Mute the sound. Mute can be cancelled by pressing VOL +/- or .
13 , , , : The coloured buttons are correspondingly used to select the coloured items on the screen.

<< Introduction
Remote Control Unit (Continue)

14 Buttons for useful operations

(Teletext) Select the teletext mode.

(Subtitle) Switch subtitle languages on/off.
15 EPG DTV: Display the EPG screen.
16 TOOLS: Display the Tools screen. You can access menu screen by pressing TOOLS while watching TV in “Live TV” apps.

(The Google Assistant or Google Search)

Speak the word that you want to search for into the ” (Microphone)” at the

upper of the remote control. When you are using the ” (Microphone)”, do

not cover this part with your hand.

18 (HOME): Display the HOME screen. 19 CH / : Select the channel.

The Remote Control Unit illustration in this operation manual is for explanation purpose and may vary slightly from the actual remote control unit depending on the selected region. The Google Assistant is not available in certain languages and countries. Availability of services varies by country and language.

<< Introduction
Remote Control Unit (Taiwan only)

1 ( ) (POWER): Switch the TV power on or enter standby.

2 0-9: Set the channel.

(AUDIO): Selects the audio mode during multichannel audio

broadcasts.

4 External equipment operational buttons: Operate the external

equipment.

(INFO)

DTV: Display the programme information.

6 YouTube: Display the YouTube screen.
7 NETFLIX: Display the NETFLIX screen. If you press the NETFLIX button when the TV is turned off, the TV turns on and the NETFLIX screen is displayed.

8 (Back): Return to the previous screen.

9 / / / ,

(ENTER): Select a desired item on the screen.

(INPUT): Select an input source.

11 +/- (VOL+/-): Set the volume.

(MUTE): Mute the sound.

Mute can be cancelled by pressing

+/- (VOL+/-) or

(MUTE).

13 (R), (G), (Y), (B): The coloured buttons are correspondingly used to select the coloured items on the screen.

<< Introduction
Remote Control Unit (Taiwan only) (Continue)

(Subtitle): Switch subtitle languages on / off.

(SLEEP): Set the sleep timer.

(EPG)

DTV: Display the EPG screen.

(TOOLS): Display the Tools screen.

You can access menu screen by pressing

(TOOLS) while watching TV

in “Live TV” apps.

(The Google Assistant or Google Search)

Speak the word that you want to search for into the ” (Microphone)” at the

upper of the remote control. When you are using the ” (Microphone)”, do

not cover this part with your hand.

19 (HOME): Display the HOME screen.

/ (CH / ): Select the channel.

<< Introduction
Remote Control Unit (Hong Kong only)

>>
1 (POWER): Switch the TV power on or enter standby. 2 0-9: Set the channel. 3 AD/MPX: Select the sound multiplex mode and audio description. 4 External equipment operational buttons: Operate the external equipment. 5 INFO DTV: Display the programme information. If you press the INFO button after channel search, the “TTX”, “SUB”, “HD” and ” ” logo will be displayed. All DTV signal has fixed to 1080P.
6 YouTube: Display the YouTube screen. 7 NETFLIX: Display the NETFLIX screen. If you press the NETFLIX button when the TV is turned off, the TV turns on and the NETFLIX screen is displayed.
8 (Back): Return to the previous screen. 9 / / / , ENTER: Select a desired item on the screen. 10 INPUT: Select an input source. 11 VOL+/-: Set the volume.
12 (Mute): Mute the sound. Mute can be cancelled by pressing VOL +/- or .
13 , , , : The coloured buttons are correspondingly used to select the coloured items on the screen.
NOTE
: Select Hong Kong Digital TV setting menu.

<< Introduction
Remote Control Unit (Hong Kong only) (Continue)

14 Buttons for useful operations

(Teletext) Select the teletext mode.

(The Google Assistant or Google Search)

Speak the word that you want to search for into the ” (Microphone)” at the

upper of the remote control. When you are using the ” (Microphone)”, do

not cover this part with your hand.

18 (HOME): Display the HOME screen. 19 CH / : Select the channel.

<< Introduction of Android TV

Entertainment Hub

Connect to (HOME) for apps, games, movies and more.

Example

Start a Search. Among the applications installed on the TV, the icons for the favourite applications are shown inside here. (Favourite applications can be added / deleted / changes its order by users.)
: Click to jump to Apps screen where all the installed applications are listed. The contents of the programmes that user is watching or watched are displayed here.
Notifications: Display the notifications. Inputs: Icon to select an input source. Network Settings: The network connection status is displayed. Settings: Various settings can be configured here.
EN 1-7 ENGLISH | () | () | | FRANÇAIS | PORTUGUÊS | INDONESIA | | TING VIT | | | | O’ZBEK TILIDA

<< Introduction of Android TV

Entertainment Hub (Continue)

Example

<< Introduction of Android TV
What Android TV can do
Google Play Store Google Play Store is Google’s official store and portal for AndroidTM apps, games and other content for your Androidpowered phone, tablet or Android TV device. (See page 4-1.)
Netflix You can video streaming services to watch internet content. The available services vary depending on your country and region. You can launch this service by selecting their tiles in the HOME menu.

>>
Unique feature from SHARP
Azan An app for Azan and islamic prayer times with accurate prayer time based on your current location. (See page 4-3.)

<< Initial setup
Auto installation
When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another.
Confirm the following before turning on the power Is the antenna cable connected? Is the AC cord plugged in?
1 Press (JOG-KEY) on the TV. The initial auto installation wizard appears.
2 Setting the OSD language. x Press / to select the desired language, and then press ENTER. 3 Press “Continue” to allow Android phone to setup TV.
If select “Skip”, the screen will jump to step 4. 4 Press / to select your Wi-Fi network.
If select “Skip”, the screen will jump to step 6. 5 Press / to sign in Google account.
6 Press / to select “Accept”, “Terms of Service”, “Privacy Policy” and x “Play Terms of Service”.
7 Press “Yes” or “No” to allow Google to use your device location.
8 Press “Yes” or “No” to set permission for Google to use your TV diagnosis x and usage data.
If Wi-Fi network is not connected, the description of Android TV screen will appear, and then press ENTER. 9 Press / to select desired applications, and then press ENTER. The x description of Android TV screen will appear, and then press ENTER. This screen will not appear if Wi-Fi network is not connected.
10 Setting the region. xx Press / to select your region or area, and then press ENTER.

>>
NOTE
Digital (DVB-T/T2) broadcasting cannot be viewed in the area where digital broadcasting is not yet launched. DTV concerned menu may not displayed in some region. Hong Kong digital TV channel setting. (See page 2-1 and 2-2.)
11 Press / to start Channel scan.
12 Press / to view Sharp Terms of Use and Sharp Privacy Policy.
13 Select TV mode. xx Press / to select where you will use this TV, and then press ENTER. Home:
“Home” mode is optimized for efficient energy usage for home use. If you plan to use this TV at home, please select “Yes”.
Retail: “Retail” mode is optimized for store demo with fixed settings. “Retail” mode is for store demo only and setting are not saved. Please select “Yes” to proceed.
NOTE
Retail: A demonstration image will be displayed after initial auto installation is completed. If you have chosen “Retail” by mistake, go to
” (HOME)” > “Settings” > “Device Preferences” > “Retail Mode” > “Continue” > “Off”.
14 Press “Start” or “Skip” to RC setting. Internet connection enables you to use voice search by microphone key on the RC.
15 The description of Netflix screen will appear. Press “Next” to finish Netflix setup procedure. Press “Setup Network” if Wi-Fi network is not connected.
16 Press / to select “Off” or “On” to enable the Chromecast built-in xx function.
17 Initial setup has finished.

<< Software Updates via Over-The-Air (OTA)

To search for new software updates

Refer to ” (HOME)” > “Settings” > “Device Preferences” > “About” > “System update”.
NOTE Make sure your TV is connected to the internet when performing software updates via OTA. After finished downloading, please allow some time to apply the installed updates. During installation, please do not perform any operations, including power off or unplug your TV. Software updates performance is depending on internet connection.

<< Updating the TV’s Software

OAD
Refer to “TOOLS” > “TV options” > “Advanced options” > “OAD”.
This function is for automatically download the data for the version update software over digital broadcasts when the “Auto download” is set to “Yes”. To download, follow the instructions when the download message appears during a digital broadcast. Once the software upgrade is done, the TV will automatically go to standby state with Red LED.
CAUTION
Do not disconnect the AC cord when the software upgrade is in progress, as this may cause the upgrade to fail. If problem arises ask a qualified service personnel before the software upgrade period expires.

Software Version
Refer to ” (HOME)” > “Settings” > “Device Preferences” > “About” > “Software Version”.
You can check the current version of the software on the screen.

Software License
Refer to ” (HOME)” > “Settings” > “Channel” > “Open source licenses”.
You can read the software licenses in the on-screen display menu.
Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.

<< TV and Channel settings
How to tune the channel
Refer to “TOOLS” > “TV options” > “Settings” > “Channel” > “Channels”.
You can tune channels manually. Select from the following available settings.
Channel scan Update scan Single RF scan LCN Channel scan type Channel store type
For Hong Kong only
Refer to “DTV-HK” > “Press ” > “Channel Search” > “Manual Search”.
Select from the following available settings. Current frequency Start Search

>>
Auto channel update
Refer to “TOOLS” > “TV options” > “Settings” > “Channel” > “Auto channel update”.
Select from the following available settings. On Off

<< TV and Channel settings

Hong Kong DTV channel setting

1 Press INPUT to select “DTV-HK” input.

2 Press “Yes” or “No” to start auto search. You do not need to do anything during the auto search. Press
to exit.

(Back)

3 Wait until the Initial setup finishes. Selected channel will be automatically reflected on the background.

Hong Kong DTV menu setting
Press to display menu screen.

Channel
Select from the following available settings. Channel Edit EPG Subtitle Audio Language Channel List Program Info

Channel Search
Select from the following available settings. Auto Search Manual Search
Preference
Select from the following available settings. *OSD Language 1st Preferred Subtitle 2nd Preferred Subtitle For Hearing Impaired 1st Preferred Audio Language 2nd Preferred Audio Language
NOTE * For Hong Kong DTV only have 3 OSD languages.
(English, Simplified Chinese, Traditional Chinese)
Setting
Select from the following available settings. DTV Factory Reset DTV Software Update DTV Version

<< TV and Channel settings
Channel settings-Programme edit
Refer to “TOOLS” > “TV options” > “Settings” > “Channel” > “Channels”.
Use this menu to set up a channel individually. Channel skip You can select the channels to skip. Channel sort Channel position can be sorted freely. Channel move Channels position can be moved freely. Channel edit You can change channel names individually. Clear channel list Channels can be erased individually.
Channel settings-How to change Audio language and Soundtracks
Audio language/Audio language 2nd
Refer to “TOOLS” > “TV options” > “Settings” > “Channel” > “Audio language/Audio language 2nd”.
Switching the multi audio languages Set up to two preferred multi audio languages to display if the audio languages are available. Each time you press AD/MPX on the remote control unit, the audio language switches.
NOTE This function depends on audio language information from broadcasters. If audio for the selected language is not included in a received broadcast, audio will not be output for that language.

>>
Soundtracks Refer to “TOOLS” > “TV options” > “Advanced options” > “Soundtracks”.
You can choose from the multilanguages options based on your preference.
Channel settings-How to enable Subtitle (Except Hong Kong)
Subtitle Refer to “TOOLS” > “TV options” > “Advanced options” > “Subtitle”.
You can display subtitles for the hearing impaired in the Teletext broadcast if the subtitle languages are available.
Analog subtitle Digital subtitle lang. Digital subtitle lang. 2nd Subtitle type NOTE If subtitles for the selected language are not included in a received broadcast, subtitles will not be shown for that language.

<< TV and Channel settings
Channel settings-How to launch EPG
EPG
What is an EPG? An “EPG (Electronic Programme Guide)” is a programme schedule, which is displayed on the TV screen. The EPG is broadcasted together with DTV. The TV screen shows the EPG when the viewer presses EPG on the remote control, provided that the TV is receiving the digital broadcasting signal. The EPG enables you to search for a programme, do timer view the programme schedule in detail.
Basic Operation
Display the EPG screen Press EPG. Press / to select different programme time information. Press / to change the day selection.
Close the EPG screen Press EPG again or (Back) to exit.

>>
Basic Operation (Hong Kong only) Display the EPG screen (Weekly mode)
Press EPG. Press / to select different programme for operation.
Press to change the day selection. Press to change the previous day selection. Change the EPG mode
Press to change the EPG mode selection. You can change to Weekly, Now/Next or Daily mode. Close the EPG screen Press EPG again or (Back) to exit.

<< TV and Channel settings

Channel settings-How to change Audio channel
If multi sound modes are received, each time you press AD/MPX the mode switches.

In the TV mode of A2 TV broadcasts When receiving a stereo signal

Switching the digital audio format (DTV only)
The sound mode screen disappears in six seconds. Selectable items vary depending on the received broadcasts. The audio description sound is selected depending on the main audio.

When receiving a bilingual signal

Switching the analogue audio format You can switch between multiple audio modes when watching a multiple audio or stereo broadcast programme.
In the NICAM TV broadcasts When receiving a stereo signal

When receiving a monaural signal
In the BTSC broadcasts (Philippines only) When receiving a SAP STEREO signal

When receiving a bilingual signal

When receiving a stereo signal

When receiving a monaural signal

When receiving a SAP signal

<< TV and Channel settings
Channel settings-How to operate Parental controls
Refer to ” (HOME)” > “Settings” > “Channel” > “Parental controls”.
This function allows TV channels to be restricted. It prevents children from watching violent or sexual scenes that may be considered inappropriate. If you have already set the password, enter it here.
Channels blocked You can block the viewing of any selected channel.
Inputs blocked You can block the viewing of any selected input.
Change PIN You can set and change the Password by using 0-9.
NOTE As a precautionary measure, make a note of your Password and keep it in a familiar place. PIN input is required when executing “Parental controls” screen. The default PIN is “1234”.

>>
Programme restrictions Used to enable or disable the parental control function. This function will not be selectable from the menu if you do not first configure your password.
Rating (Guaranteed by SHARP)
Singapore G: Suitable for all ages. PG: Suitable for all but parents should guide their young. PG13: Suitable for persons aged 13 and above but parental guidance is advised for children below 13. NC16: Suitable for persons aged 16 and above. M18: Suitable for persons aged 18 and above. R21: Suitable for adults aged 21 and above.
Thailand P: Suitable for children kid 3-6 years. C: Suitable for children kid 6-12 years. G: Suitable for general audience. PG13: Suitable for people aged 13 and above. PG18: Suitable for people aged 18 and above. And parental guidance for children under 18. R: Suitable for adult.

Rating (Not Guaranteed by SHARP) This is used in regions other than Singapore and Thailand.

<< TV and Channel settings

Teletext settings (DTV only) (Except Taiwan and Hong Kong)
Refer to “TOOLS” > “TV options” > “Advanced options” > “Teletext”.
If you set the language of the initial page (this page is displayed for the first
time after pressing ) for teletext in DTV mode, it will start from the selected language page. Select from the following available settings.
Digital teletext language Decoding page language
NOTE
This function is available for teletext in DTV mode. This is not available for teletext in ATV or external input mode. If the initial teletext page of the selected language in this function is not included in a received broadcast, the default initial page will be displayed.

Postal code (Indonesia only)
Refer to “TOOLS” > “TV options” > “Advanced options” > “Postal code”.
This function enable you to select your local postal code. NOTE
“Postal code” will be appear only when region “Indonesia” is selected.
System information (Except Hong Kong)
Refer to “TOOLS” > “TV options” > “Advanced options” > “System information”.
Check for system updates and view various information of signal.

<< Connection/External Devices

Network and Internet

Connecting to the Internet To configure the network settings in order to enjoy streaming content and

internet applications. These settings can be configured from ” “Settings” > “Network & internet”.

(HOME)” >

NOTE
When an Internet connection is made, LAN and wireless connection cannot be used at the same time. Use only one of the connection types.

>>
Using LAN Using a LAN cable (commercially available) to connect the LAN terminal on the TV to your broadband router (commercially available). Wol (wake on LAN) Enable the TV to be started by a signal over a LAN. NOTE
Standby power consumption will be increase when Wol is turned ON.

Using Wi-Fi
This TV is equipped with a wireless LAN function. For a wireless LAN connection, you must use wireless setup to connect the access point and TV.
Wow (wake on wireless network) Enable the TV to be started by a signal over a Wi-Fi.
NOTE Standby power consumption will be increase when Wow is turned ON.

<< Connection/External Devices

Network and Internet (Continue)

NOTE

This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may result in radio communications that do not comply with regulations on radio communications. Therefore, do not use a separate wireless LAN adapter. A wireless LAN connection and performance cannot be guaranteed for all residential environments. In the following cases, the wireless LAN signal may be poor or drop, or the connection speed may become slower. – When used in buildings made with concrete, reinforced steel, or metal – When placed near objects that obstruct the signal – When used with other wireless devices that emit the same frequency – When used in the vicinity of microwave ovens and other devices that emit a magnetic field, electrostatic charge, or electromagnetic interference When there is significant interference in the 2.4-GHz frequency (such as from other wireless LAN devices, Bluetooth® devices, 2.4-GHz cordless telephones, and microwave ovens), it is recommended that you use a wireless LAN router/access point that supports IEEE802.11ac (5 GHz) and set the access point to transmit at 5 GHz. For setup details, see the operation manual of your access point. Operations cannot be guaranteed when used with access points that do not have Wi-Fi® certification. A wireless LAN router/access point is required to connect the TV to the Internet using a wireless LAN. See the operation manual of your access point for setup. If your access point is set to a stealth mode (that prevents detection by other devices), you may not be able to establish a connection. In this case, disable the stealth mode on the access point. A stable connection speed is required to play back streaming content. Use LAN connection if the wireless LAN speed is unstable. Before transferring to a third party or disposal, be sure to initialise the wireless LAN settings. Please follow the legislation in your region when using the wireless LAN outdoors.

If you have failed to connect to the Internet in the above operation, then an error message will appear. In this case, press connected TV feature to make changes to the network settings. If you still cannot connect to the Internet, please consult your Internet service provider or telephone company.

(HOME) to exit from the

You cannot configure the settings from ” (HOME)” > “Settings” > “Network & internet” while using an application. If you must configure your “Network”

settings, press the (HOME) key to exit the function.

<< Connection/External Devices

Network and Internet (Continue)

NOTE

DISCLAIMERS This SHARP device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider. SHARP shall not be liable to you or any third party for your failure to abide by such authorization or terms of use. Unless otherwise specifically authorized by the applicable content or service provider, all third party content and services provided are for personal and non-commercial use; you may not modify, copy, distribute, transmit, display, perform, reproduce, upload, publish, license, create derivative works from, transfer or sell in any manner or medium any content or services available via this device. SHARP is not responsible, nor liable, for customer service-related issues related to the third party content or services. Any questions, comments or service-related inquiries relating to the third party content or service should be made directly to the applicable content or service provider. You may not be able to access content or services from the device for a variety of reasons which may be unrelated to the device itself, including, but not limited to, power failure, other Internet connection, or failure to configure your device properly. SHARP, its directors, officers, employees, agents, contractors and affiliates shall not be liable to you or any third party with respect to such failures or maintenance outages, regardless of cause or whether or not it could have been avoided. ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU ON AN “AS-IS” AND “AS AVAILABLE” BASIS AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY OR REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTIES OF SUITABILITY, AVAILABILITY, ACCURACY, COMPLETENESS, SECURITY, TITLE, USEFULNESS, LACK OF NEGLIGENCE OR ERROR-FREE OR UNINTERRUPTED OPERATION OR USE OF THE CONTENT OR SERVICES PROVIDED TO YOU OR THAT THE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR EXPECTATIONS. SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF THIRD PARTY CONTENT OR SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT OR SERVICE RELATED TO SUCH THIRD PARTY PROVIDERS. IN NO EVENT WILL SHARP AND/OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR OTHER DAMAGES, WHETHER THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT, NEGLIGENCE, BREACH OF WARRANTY, STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

<< Connection/External Devices
Chromecast built-in compatible devices
When you connect a device such as a Chromecast built-in compatible smartphone or tablet to this TV, you can enjoy video and audio from the device on the TV’s large screen and speakers.
NOTE When the TV is turned off or the connection is ended on the device, you must connect the device again. For details about the operation of the Chromecast built-in compatible device, check the manual for that device.

Audio Devices

HDMI Input (Except Hong Kong)

Speaker select ARC
Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Sound” > “Speaker select ARC”.

You can select to listen to the TV sound only from the LINK-compatible audio system.
Internal Speakers External Devices

Inputs Refer to ”

(HOME)” > “Settings” > “Device Preferences” > “Inputs”.

Change the label for an input terminal, and switch between HDMI CEC Control Settings.

Digital Audio Output
Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Sound” > “Digital Audio Output”.
This function allows you to select the digital audio signal type. Auto Bypass PCM Dolby Digital Plus Dolby Digital

<< Connection/External Devices
Bluetooth setup
This feature enable a TV to connect with other Bluetooth devices via Bluetooth connection.
NOTE When you use the Bluetooth device with your TV for the first time, you must make pairing between the device and the TV. Once the pairing is correctly carried out, the Bluetooth device will be registered on the TV. Connectivity and reception range may depend on condition, environment, and distance of Bluetooth devices. Sound quality and compatibility are depending on Bluetooth devices. The Bluetooth format only supports HID, A2DP and AVRCP.
Bluetooth devices
You can add, delete or select Bluetooth devices.

>>
Connection/Selection Procedure
1 Turn the Bluetooth device on and put it in pairing mode. To put your Bluetooth device in pairing mode, refer to the operation manual of the device.
2 Refer to ” (HOME)” > “Settings” > “Remotes & Accessories” > “Add accessory” to put the TV in pairing mode. A list of available Bluetooth device will be displayed.
3 Select the desired device from the list, then follow the on screen display instruction. If you are prompted to enter a password, refer to the operation manual of the device. After pairing is completed, the device connects to the TV.
NOTE To pair the remote control unit with the TV, please hold CH and for 10 seconds. Wait for about 1 minute before pairing.

<< Connection/External Devices

USB

Preparation
You can connect the TV to a USB memory device and USB hard drive to enjoy viewing pictures, listening to music, and watching videos.
NOTE Depending on the USB memory device/USB hard drive, the TV may not be able to recognise the recorded data. It may take time to read the recorded data if the USB memory device/USB hard drive contains many files or folders. Use only alphanumeric characters for naming files. File names (may vary depending on character set) may not be displayed.

Connecting a USB Memory Device/USB Hard Drive
Insert the USB memory device with recorded photos, music or videos into the USB 1 or USB 2 terminal on the TV. When connecting a USB hard drive, be sure to use a hard drive with an AC adapter. Do not remove a USB memory device from the TV while transferring files, using the slide show function, or switching screens, or before you exit “MultiMediaPlayer”. Do not insert and remove a USB memory device/USB hard drive to and from the TV repeatedly. When using a card reader, be sure to insert a USB memory device first.
CAUTION
Do not use a USB extension cable when connecting a USB memory device to the USB terminal on the TV. Using a USB extension cable with the USB memory device may prevent the TV from performing correctly.

<< Connection/External Devices
USB (Continue)
Selecting the Folders to Play Back
To play back data on a USB memory device insert the USB memory device on the TV.
1 Press ” (HOME)” > “Apps” > “MultiMediaPlayer” to open the Playback screen.
2 Press / to select “Video”, “Photo”, “Audio” or “Text”, and then press ENTER.
3 Press / (or / ) to select the drive/server where you want to find your file, and then press ENTER. (Only can select if more than one USB input.)
4 Press / to select the desired folder, and then press ENTER.
NOTE USB only support device up to DC5V 1.5A.
(Hong Kong only) USB 1 support device up to DC5V 0.5A. USB 2 support device up to DC5V 1.5A.

USB Device Compatibility

USB device File system

USB Memory, USB card reader (Mass Storage class), USB hard drive
FAT/FAT32/NTFS (read only)

Photo file format

Format

JPEG, PNG, BMP

Audio file format

Format
MP3 AAC WMA WAV

Sampling rate [KHz]

Bitrate [Kbps]

8/11.025/12/16/

8~320

22.050/24/32/44.1/48

32/44.1/48

8~320

8/11.025/16/22.05/ 8~384 32/44.1/48/64/88.2/96

8/11.025/12/16/

8~1024

22.050/24/32/44.1/48

NOTE
If the TV is turned off and then on again, the number assigned to the USB may change.

<< Connection/External Devices

USB (Continue)

Selecting the Folders to Play Back (Continue)

Video file format

Container
AVI

Video
MPEG-1 MPEG-2 MPEG-4
H.264

MKV ASF PS TS MP4

MPEG-1 MPEG-2 MPEG-4
H.264 VP8 H.265(HEVC)
MPEG-4 VC1(WMV3)
MPEG-1 MPEG-2
MPEG-2 VC1(WMV3)
H.264 H.265(HEVC)
MPEG-4 H.264
H.265(HEVC) VP8
VC1(WMV3)

Audio
PCM MP2: MPEG-1 Layer2 MP3: MPEG-1 Layer3
AAC AC3 WMA
PCM MP2: MPEG-1 Layer2 MP3: MPEG-1 Layer3
AAC AC3 WMA VORBIS
MP3: MPEG-1 Layer3 WMA
MP2: MPEG-1 Layer2 MP3: MPEG-1 Layer3
AC3
MP2: MPEG-1 Layer2 AAC AC3
MP2: MPEG-1 Layer2 MP3: MPEG-1 Layer3
AAC

>>
NOTE Progressive format jpeg files are not supported. USB 1.1 devices may not be played properly. Operation using USB hubs is not guaranteed. Some video file formats may not be played depending on the file. Some images may not be displayed in the appropriate aspect ratio depending on the file format. File extensions are not used to determine the file format.

<< Connection/External Devices

USB (Continue)

Playing Back Files on a USB Memory Device

Photo Mode/Audio Mode/Video Mode

Buttons for thumbnail/list operations

Buttons
/ / / ENTER
(Back) (blue) TOOLS

Description
Select a desired item.
When selecting a folder icon: Enter this directory. When selecting a photo file: Enlarge the photo. When selecting an audio file: Play audio. When selecting a video file: Play the video file. Return to the previous process.
Change Thumbnail/List mode.
Display the Menu screen.

NOTE
When you are viewing the MultiMediaPlayer app in Audio Mode, you cannot configure Picture/Audio settings.

>>
Menu for thumbnail operations Press / to select an item and make settings to your preferences.
Example
Sort – You can change the way in which files are ordered. – Press / to select “Type”, “Date” or “Name” and then press ENTER. Media type – Switch the media type when the Recursive parser display is displayed. Thumbnail size – Change the thumbnail size.
Small/Medium/Large Recursive parser – Display all files according to the Media type settings. Photo frame – You can add frame to your photo. NOTE
You can see the file name, file size and pixel size of the selected photo in the upper-left corner of the screen.

<< Connection/External Devices

USB (Continue)

Playing Back Files on a USB Memory Device (Continue)

Photo Mode

Slide Show The photos displayed on the thumbnail selection screen are displayed as a slide show.
Buttons for slide show operation

Buttons
/ / /, ENTER
(Back) TOOLS

Description
Play the Slide Show. Pause the Slide Show. Select the desired item.
Return to the thumbnail selection screen.
Display the USB Menu screen.

Menu for slide show

Example

Play/Pause Start or pause slideshow.
Repeat Set whether to show the slide show repeatedly.
None/Repeat one/Repeat all

>>
Shuffle on/Shuffle off Shuffle the image files within the folder and display as a slide show.
Duration Specify the length of time before the next image appears. Press / to select the desired length of the time, and then press ENTER.
Short/Medium/Long
Effect Specify the effect for transitioning to the next image.
None/Dissolve/Wipe right/Wipe left/Wipe up/Wipe down/Box in/ Box out/Random
Rotate* Rotate the photo by 90 degrees to the right. * Only displayed when playback is paused.
Zoom* Zoom in on the image.
1 X/2 X/4 X * Only displayed when playback is paused.
Show info Display the photo information.
Photo frame image Display the photo in frame.
NOTE
The slide show continues until you press (Back). For setting the slide show speed, select “Duration” on the Menu screen. Depending on the contents, the TV system cannot display the picture at its original resolution in some cases. TV system may adjust the picture resolution accordingly.

<< Connection/External Devices

USB (Continue)

Playing Back Files on a USB Memory Device (Continue)

Audio Mode

Playing Mode Buttons for playing mode

Buttons
/ / /, ENTER
(Back) TOOLS

Description
The fast reverse speed changes every time you press .
The fast forward speed changes every time you press .
Pause the music. Go to the previous file. Go to the next file. Select a desired item.
Return to the previous process.
Display the Menu screen.

NOTE The displayed play time may differ slightly from the actual play time depending on the files.
Menu for playing mode Example

>>
Play/Pause Start or pause music.
Repeat Configure the repeat playback settings.
None/Repeat one/Repeat all
Shuffle on/Shuffle off Shuffle the music within the folder.
Show info Display audio information.
Hide spectrum/Show spectrum Show or hide the spectrum.
Lyric options You can change the lyric display type. This is only available when a lyrics file (“.lrc”) is presented. Only UTF-8 character code lyric files (without BOM) are supported.
Audio only When listening to music from a music programme, you can turn the screen off and enjoy audio only.
Audio setting Display soundtracks info.
Sound setting See pages 6-1 and 6-2.

<< Connection/External Devices

USB (Continue)

Playing Back Files on a USB Memory Device (Continue)

Video Mode

Playing Mode

Buttons for playing mode

Buttons
/ / /, ENTER
(Back) TOOLS

Description
The fast reverse speed changes every time you press .
Play the video. The fast forward speed changes every time you press
. Pause the video. Go to the previous file. Stop the video. Go to the next file. Select a desired item.
Return to the previous process.
Display the Menu screen.

Menu for playing mode

Example

Play/Pause Start or pause the video.
Repeat Configure the repeat playback settings.
None/Repeat one/Repeat all
Show info Display the video information.
Picture setting See pages 5-1 to 5-4.
Sound setting See pages 6-1 and 6-2.
Audio setting Display soundtracks info.
Last memory Press / to select “Off” or “Time”, and then press ENTER.

<< Smart Apps

The Google Assistant or Google Search

You may ask questions and complete tasks on your TV.

Press

(The Google Assistant or Google Search) /

(Voice) button on the remote control.

Search with your voice.

NOTE
The Google Assistant is not available in certain languages and countries. Availability of services varies by country and language.

Google Play Store
You may download apps from the Google Play Store on the TV, just like you do with smartphones and tablets.
To install app
Refer to ” (HOME)” > “Google Play Store” app and select an app that you want to download and then the app will start downloading. After downloading, the app is automatically installed and added. The icon will appear in the Apps screen, allowing you to launch it.
To uninstall app
Refer to ” (HOME)” > “Settings” > “Apps” > “See all apps” and select an app to be deleted and then uninstall the app.
NOTE
We recommend that you create a Google Account on a computer or mobile device. You can only download apps that are compatible with the TVs. It may differ from apps for smartphones or tablets. An internet connection and Google Account are required to download apps from the Google Play Store.

>>
Google Account setting
Accounts & sign-in Refer to ” (HOME)” > “Settings” > “Accounts & sign-in”.
To sign in, enter your email address and password. Location Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Location”.
Configure the location settings.
Usage & Diagnostics Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Usage & Diagnostics”.
Automatically send diagnostic information to Google, like crash reports and usage data from your device, apps, and Chromecast built-in. This information won’t be used to identify you. You can adjust these permissions at any time from device settings. Learn more at: g.co/AndroidUsageHelp and g.co/cast/device_stats.

<< Smart Apps

Keyboard
When you are editing an input screen or specifying the Network settings used for accessing the Internet, enter text from the software keyboard.

The text you enter is displayed as you type it in.

While you are entering text, likely input conversion candidates are displayed based on what you typed in.

Erases the character string. Enters a space.

Applies the entered information and closes the software keyboard.
Erases text one character at a time.

NOTE
You can enter up to 128 characters for text. Some special characters or diacritics may not be available depending on where you enter the text.

<< Smart Apps

Unique feature from SHARP
Azan – Prayer time
Refer to ” (HOME)” > “Settings” > “Apps” > “See all apps” > “Azan” app.
This feature could help a Muslim user to stay on top of Prayers with Azan by getting the accurate prayer times via notification. By configuring location and time zone, all five times prayer will be calculated according to the pointed calculation method.
Auto Setup: This function allows you to select the address configuration through preset data. (Country, Province, City)
Manual Setup: You can insert manually all informations in the screen.
Prayer Time Selection: You can select or deselect between 5 prayers for Azan notification.
Notification: You can select or deselect prayer time to notify and enable or disable prayer alert.
Info: A quick reference for you to get info on five times prayer after setup completed.
Demo: A demonstration video will be displayed when Azan is implemented.

NOTE
The notification will be displayed on the screen for 5 minutes. After 5 minutes, the notification screen will be off automatically. The notification is based on the setting in Prayer time selection. Press (Back) to off the notification screen immediately. The TV and Azan time information prior to internet connection. The TV time information from digital TV signal will be used if internet connection is not available. Deviation of the TV and Azan display time may occur due to improper digital broadcast standard.

<< Smart Apps

Tools screen setting
Tools menu screen

1 Press TOOLS to display the TOOLS screen. 2 Press / to select the desired menu.
*Channels – Add to my favorite, Program guide, New channels available TV options – Picture mode, Display mode, Speaker select ARC, Power control, Manual OAD, Advanced options, Settings 3 Press TOOLS to exit. NOTE * Except Hong Kong. Press INPUT to select “DTV-HK” to watch Hong Kong Digital TV. (Hong Kong only)
EN 4-4 ENGLISH | () | () | | FRANÇAIS | PORTUGUÊS | INDONESIA | | TING VIT | | | | O’ZBEK TILIDA

<< Picture settings
Picture Mode (Changing Pic. Quality)
Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Picture” > “Picture Mode”.
Picture Mode gives you several viewing option to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of programme watched or the type of device connected.
User: Customise the picture setting.
Standard: Default picture settings for common users.
Dynamic: For a clear-cut image emphasising high contrast, useful for sports viewing.
Comfort Mode: Reduce the blue light of the TV.
Movie: Dim down the colour for long hour viewing.
Game: Lower latency for fast gaming illustration.
Super Eco: Reduce the backlight brightness to save power consumption.

Configuring Picture settings

Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Picture”.

Adjusts the picture to your preference with the following picture settings.

Selected item Backlight Brightness Contrast

button The screen dims For less brightness For less contrast

button The screen brightens For more brightness For more contrast

Colour Tint

For less colour intensity
Skin tones become reddish

For more colour intensity
Skin tones become greenish

Sharpness

For less sharpness

For more sharpness

NOTE
For resetting all Picture settings items to the factory preset values, press / to select “Reset to Default”, press ENTER, press / to select
“Yes”, and then press ENTER.

<< Picture settings

Configure advanced Picture settings

Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Picture”.

Gamma Adjusts the differences of picture tones between bright parts and dark parts.
Dark Middle Bright

Color Temp

For a better white balance, use colour temperature correction.

User:

White with bluish tone

Cool:

Standard:

Warm:

White with reddish tone

Red/Green/Blue Adjusts the white balance by changing the value of each

Gain:

item.

CMS (Colour Management System) Colour tone is managed using the six-colour adjustment setting.
Tint: This is a standard to adjust the colour either more reddish or more bluish in tone.
Colour: Increases or decreases the saturation of a selected colour.
Brightness: A higher value makes the image brighter.

NOTE A lower value makes the image darker.

>>
HDR related settings
Refer to “TOOLS” > “Picture setting” > “Picture”.
HDR (High Dynamic Range) The HDR (High Dynamic Range) technology implements video image that is very similar to the image shown through human eyes by finely adjusting the contrast of the source.
Auto: Enable HDR effect for HDR source. Off: Disable HDR effect for HDR source.
NOTE This feature only available in certain third party applications.

<< Picture settings
Unique Picture setting from SHARP
Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Picture” > “Advanced Video”.
Digital Noise Reduction Reduces noise on screen and produces a clearer video image.
Off Low Medium High Auto
MPEG NR This feature improves the quality of pictures by reducing the block noise and mosquito noise without compromising the picture resolution.
Off Low Medium High

>>
Active contrast Automatically adjusts the image contrast according to the scene.
Off Low Medium High
DI Film Mode This function provides high-quality playback of images originally encoded at 24 frames/second, such as films.
Off Auto

<< Picture settings

Input settings
Display mode
Refer to “TOOLS” > “TV options” > “Display mode”.
This function changes the screen size. The Display mode menu varies depending on the input source.
For 4:3 programmes Automatic: Keeps the original aspect ratio based on source information and enlarge the picture as much as possible.
Full: For 16:9 squeeze pictures. Wide screen: For viewing widescreen programmes. The top and bottom of the image is cropped.
Super zoom: Removes the black bars on the side of 4:3 broadcasts. There is minimal distortion.
Unscaled: Detects the resolution of the signal and displays an image with the same number of pixels on the screen.
4:3: Keeps the original aspect ratio in a full screen display. Movie expand 14:9: For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Movie expand 16:9: For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
NOTE Some items do not appear depending on the type of received signal.

PC Mode
Refer to “TOOLS” > “TV options” > “Settings” > “Device Preferences” > “Picture” > “Advanced Video” > “PC Mode”.
Adjusts the picture when a PC is connected to the TV via HDMI. On Off
HDMI RGB range (for 4K models only)
Refer to “TOOLS” > “TV options” > “Settings” > “Device Preferences” > “Picture” > “Advanced Video” > “HDMI RGB range”.
Sets the HDMI type for HDMI IN 1 and 2 terminals. Auto: Automatically detect HDMI 4K60P 4:4:4 or HDMI 4:2:0 device. Full: When an HDMI 4K60P 4:4:4 device is connected. Limited: When an HDMI 4:2:0 device is connected.

<< Sound settings

Audio Mode

Configuring Sound settings

Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Sound” > “Audio Mode”.
This function allows you to convert the audio quality. Select from the following available settings.
User: Customise the sound setting.
Standard: Optimise sound quality for general content.
Dynamic: Enhances the treble and bass for a clearer sound.
Sports: Simulates the larger space of a stadium or other venue.
Movie: Optimise surround sound suitable for movie.
Music: Optimise sound for listening to music.
Clear: Makes voice clearer by lowering background sound.

Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Sound”.

You can adjust the sound quality to your preference with the followings settings.

Selected item Balance

button
Decrease audio from the right speaker

button
Decrease audio from the left speaker

Bass Treble

For weaker bass For weaker treble

For stronger bass For stronger treble

NOTE
For resetting all Sound settings items to the factory preset values, press / to select “Reset to Default”, press ENTER, press / to select
“Yes”, and then press ENTER.

<< Sound settings

Configure advanced Sound settings

Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Sound”.

Sound Surround The surround function produces Surround effect from the speakers.
On
Off

NOTE
For some discs, setup may be required on your BD/DVD player. In this case, please refer to the operation manual of your BD/DVD player.

Equalizer Detail This function allows you to change the sound quality.
120Hz 500Hz 1500Hz 5000Hz 10000Hz

SPDIF Delay (for 4K models only) If you are hearing an audio delay across all sources or channels and you
have a home theatre system or other speakers connected to your TV, you
can access the SPDIF Delay settings to increase the SPDIF Delay.

Selected item SPDIF Delay

button For later delay

button For advance delay

>>
Unique Sound setting from SHARP
Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Sound”.
Auto Volume Different sound sources sometimes do not have the same loudness level, such as a programme and its commercial breaks. The Auto Volume reduces this problem by equalising it.
On Off
Downmix Mode You can select the multi-channel downmix method that is compatible with your stereo system.
Stereo Surround

<< Other
Sleep Timer
Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Power Control” > “Sleep Timer”.
Allows you to set a time when the TV automatically switches to standby. Set the Sleep Timer.
Switch Off Timer
Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Power Control” > “Switch Off Timer”.
You can use this function to automatically shut off the TV after pre-configured period of time.
No Signal Off
Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Power Control” > “No Signal Off”.
When this function is enabled, the TV automatically shuts down if no signal is received for more than 5 to 60 minutes.
Off 5 Minutes 10 Minutes 15 Minutes 30 Minutes 60 Minutes
NOTE When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute. When a TV programme finishes, this function may not operate.

>>
Screen saver
Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Screen saver”.
Set the Screen saver.
Storage
Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Storage”.
View the memory usage status.
Accessibility
Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Accessibility”.
Configure Audio Description, Visually Impaired, Hearing Impaired, Captions and High contrast text. Some of the Caption settings may not be applied.
Auto sleep
Refer to “TOOLS” > “TV options” > “Advanced options” > “Auto sleep” > “Never” to continue watching TV.
Select from the following available settings. Never 4 hours 6 hours 8 hours
NOTE The default setting for “Auto sleep” is “Never”.
Reset
Refer to ” (HOME)” > “Settings” > “Device Preferences” > “Reset”.
When you perform a reset, the TV will be returned to the factory preset values, and the

Download

Sharp 4T-C65CK1X 4K HDR Android TV User Manual

Was this manual helpful?