Sharp HT-SB150 Slim Wall Mountable Soundbar User Guide

SHARP HT-SB150 Slim Wall Mountable
 Soundbar User Guide

Before using your product, read all safety instructions. For full instructions please refer to the user guide available to download from the website sharpconsumer.eu.

1) Getting started – initial set up

  1. Use the inputs on the rear panel of the soundbar to connect external audio and video devices equipped with the corresponding outputs (Pic. 1). You will achieve the best sound quality by using the digital inputs OPTICAL and HDMI.
    Caution! Turn all devices off and disconnect them from the power supply before starting any connection.
  2. Plug the soundbar power cord in a wall outlet to power the device.
  3. Insert the batteries into the remote control.
  4. Press the button on the remote control to switch the main unit ON or OFF.
  5. Press the button on the unit repeatedly or press the / buttons on the remote control to select the desired mode.

2) Remote control

  1. – Switch the unit between ON and STANDBY mode.
  2. Select the Bluetooth mode. Press and hold to activate the pairing function in Bluetooth mode or disconnect the existing paired Bluetooth device.
  3. – Select the play function.
  4. VOL +/- ­- Increase/decrease the volume level.
  5. ­ Skip to previous/next track in Bluetooth/USB mode.
  6.  – Play/pause/resume playback in Bluetooth/USB mode.
  7.  – (MUTE) Mute or resume the sound.
  8. BASS +/- ­- Adjust bass level.
  9. TRE +/- ­ – Adjust treble level.
  10. EQ ­- Select a Preset sound mode.

3) Side controls on soundbar

  1. button
    Switch the unit between ON and STANDBY mode.
  2. button
    Select the source.
  3.  +/- buttons
    Increase/decrease the volume level.

Bluetooth Operation

Pair Bluetooth-enabled Devices
The first time you connect your Bluetooth device to this player, you need to pair your device to this player.

  1. Turn on the soundbar by pressing the standby button.
  2. Press the button on the unit repeatedly or button on the remote control to select Bluetooth mode. You are in Bluetooth mode when you see letters BT flashing on the display.
  3. Enter the Bluetooth search mode on the device you wish to connect to the soundbar.
  4. Select SHARP HT-SB150 from the list
  5. Enter password “0000”, if required.
  6. Begin playing music from the connected Bluetooth device.

UMC Poland Sp. z o.o.
Ostaszewo 57B, 87-148 Lysomice,
Poland Made in China
SAU/QSG/0038
www.sharpconsumer.eu