Asus P508 Strix Carry Optical Gaming Mouse User Guide

OPTICAL GAMING MOUSE
STRIX CARRY
 Quick Start Guide

Device feature

  1. Left button
  2. Right button
  3. Scroll wheel
  4. DPI button
  5. Forward button
  6. Backward button
  7. LED indicator
  8. Mouse foot
  9. Optical sensor
  10. Connection mode switch

Profile switching

4+6 witch to Profile 1
4+5 Switch to Profile 2
4+3 Switch to Profile 3

Specifications

Profile Default DPI 1 Default DPI 2
Profile 1 1600 DPI 400 DPI
Profile 2 2200 DPI 600 DPI
Profile 3 3200 DPI 800 DPI

Getting started

  1. Install batteries to your gaming mouse:

    CAUTION!
    •     Ensure the batteries are installed in the correct orientation refer to the direction indicated in the battery compartment.
    • If you wish to replace the dangle. ensure that it is inserted in the correct orientation.
    • The bundled batteries are non-rechargeable.
    • DO NOT mix new batteries with old batteries.
    IMPORTANT
    •     Only use alkaline batteries when installing batteries to your gaming mouse.
    • We recommend you remove the batteries from your gaming mouse if the gaming mouse will not be in use for a prolonged period of time.
  2. Connect your ROG STRIX CARRY Gaming Mouse using the following methods:
    Using the RF 2.4G Wireless mode

Using Bluetooth mode

Replacing the switches

Updating the firmware and customization

  1. Connect your USB dongle to the PC, and set your gaming mouse to the RF 2.4G Wireless mode.
  2. Download and install the Armoury II software from https://www.asus.com/Kevboards-Mice/ROG-Strix-Carry/HelpDeskDownload.
  3. Follow the software instructions to update your gaming mouse’s firmware.
  4. Customize your gam ng mouse using Armoury II.
    NOTE: For more information on this manual, please refer to https://www.asus.com/KeyboardsMice/ROGStrixCarry/HelpDeskManual/ for the detailed e-manual.

ROG STRIX CARRY Gaming Mouse battery status

LED color Duration Description
Green* Lights up for 5 seconds Blinks twice every 0.5 seconds
Red Battery Power 25% – 100% Battery Power under 25%

The LED indicator will light green only when you set the connection mode to RF 2.4G Wireless mode, or when setting to Bluetooth mode after the gaming mouse has already been paired.

Safety Guidelines

Keep the device away from liquid, humidity, or moisture. Operate the device only within the specific temperature range of 0°C(32°F) to 45°C(113°F). When the device exceeds the maximum temperature, unplug or switch off the device to let it cool damn.

Notices

Limitation of Liability
Circumstances may arise where because of a default on ASUS’p art or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product. ASUS will only be responsible for or indemnify you for loss, damages, or claims based on contract, tort, or infringement under this Warranty Statement
This limit also applies to ASUS’suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (I) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (7) LOSS OF, OR DAMAGE TO YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.

RF Exposure Warning

The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as packaging materials. Please go to http://csr.asus.com/english/Takeback.htm.for detailed recycling information in different regions.

CE Mark Warning

Simplified EU Declaration of Conformity ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at https://www.asus.com/support/

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference.
  • This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CAUTION! Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

Proper disposal

DO NOT throw the device in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed-out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.
DO NOT throw the device on fire. DO NOT short circuit the contacts. DO NOT disassemble the device.

Lithium-Ion Battery Warning
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Radio Frequency (RF) Exposure Information

The radiated output power of the wireless device is below the Industry Canada (IC) radio frequency exposure limits. The wireless device should be used in such a manner that the potential for human contact during normal operation is minimized.
This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions (antennas are greater than 20cm from a person’s body).

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B)

VCCI: Japan Compliance Statement
VCCI Class B Statement

NCC: Taiwan Wireless Statement

KC: Korea Warning Statement 

Ukraine Certification Logo

Accessories that came with this product have been designed and verified for use in connection with this product. Never use accessories for other products to prevent the risk of electric shock or fire.

ASUS contact information
ASUSTeK COMPUTER INC.

Address: 1 F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan
Telephone: +886-2-2894-3447
Fax: +886-2-2890-7798
Web site: www.asus.com
Technical Support
Telephone: +86-21-38429911
Fax: +86-21-5866-8722, ext. 9101#
Online support: https://www.asus.com/support/Product/ContactUs/Services/questionform/?lang=en
ASUS COMPUTER INTERNATIONAL (America)
Address: 48720 Kato Rd., Fremont, CA 94538, USA
Telephone: +1-510-739-3777
Fax: +1-510-608-4555
Web site: http://www.asus.com/us/
Technical Support
Support fax: +1-812-284-0883
Telephone: +1-812-282-2787
Online support: https://www.asus.com/support/Product/ContactUs/Services/questionform/?lang=en-us 

EAC Certification Logo

RF Output table

Function Frequency Maximum Output Power (EIRP)
2.4GHz wireless (2402 – 2479 MHz) – Mouse 5 dBm
(2402 – 2479 MHz) – Dongle 4 dBnn
Bluetooth (2402 – 2480 MHz) – Mouse 1 dBm

Wireless Operation Channel for Different Domains
The wireless operation channel of this mouse is universal worldwide: 2.402-2.480 GHz, Ch02 to Ch80.

Q17041 Revised Edition V2 July 2020 Copyright © ASUSTeK Computer Inc. All Rights Reserved