Brother DCP-1610W All-In-One Mono Laser Printer User Guide

brother DCP-1610W All-In-One Mono Laser Printer

brother dcp-1610w all-in-one mono laser printer

Not all models are available in all countries.
The latest manuals are available at the Brother Solutions Center: solutions.brother.com/manuals

Watch our FAQ Videos for help with setting up your Brother machine: solutions.brother.com/videos

Unpack the machine and check the components

Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.

NOTE:

  • The components included in the box and the AC power plug may differ depending on your country.
  • The illustrations in this Quick Setup Guide are based on the MFC-1910W.
  • You must purchase the correct interface cable for the interface you want to use.

USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 metres long.

Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.

Secure Network Access
Your machine’s default password is on the label on the back of the machine (preceded by “Pwd”).
We strongly recommend you change it to protect your machine from unauthorised access.

Remove the packing materials and install the toner cartridge

Load paper in the paper tray

Connect the power cord and turn on the machine

Select your country/language (Initial setup only)
After turning on the machine, you may be required to set your country or language (depending on your machine).
If required, follow the on-screen instructions.

Change your language (if needed)
Only for certain models

  1. (DCP models)
    1. Press Menu, and then press ▲ or ▼ to choose 1.General Setup.
    2. Press OK. (MFC models) Press Menu, 0, 0, and go to step 3.
  2. Press ▲ or ▼ to choose 0.Local Language, and then press OK.
  3. Press ▲ or ▼ to select your language, and then press OK.
  4. Press Stop/Exit.

Connect the telephone line cord (for MFC models only)

Connect the machine to your computer/mobile device

  • Windows® PC with a CD-ROM drive, go to step 7A
  • Windows® PC without a CD-ROM drive, go to step 7B
  • Macintosh, go to step 7B
  • Mobile device users with a WPS/AOSS™-supported access point/router, go to step 7C

Configuration using the CD-ROM (Windows®)

One-push wireless setup for mobile devices (Wireless models only)
If your wireless LAN access point/router supports automatic wireless (one-push) setup (WPS/AOSS™), you can set up your machine without using a computer.

Print and scan using your mobile device
Download “Brother iPrint&Scan” to start using your machine with mobile devices.
solutions.brother.com/ips

Brother support web site http://support.brother.com