Pioneer VSX-LX305 Elite 9.2 Channel Network AV Receiver Installation Guide

Pioneer VSX-LX305 Elite 9.2 Channel Network AV Receiver

https://jp.pioneer-audiovisual.com/manual/vsxlx305elite/top.pdf

This document uses a 7.1 channel system as an example when describing use. Refer to the online instruction manual when using other than a 7.1 channel system. There are also descriptions for using the multi-zone feature and other detailed operating instructions.

BOX CONTENT

Initial Setup Guide

STEP 1
Connect speakers with 4 Ω to 16 Ω impedance. Twist the ends of the speaker cable wires tightly.

STEP 2
Be sure to insert the HDMI cable all the way in.

STEP 3
Switch the input on the TV to that assigned to the unit.

Troubleshooting

Try restarting the unit. Switch this unit to standby, then do 1. If the problem is not fixed, try the following:

• Unplugging the power cord and HDMI cables then replugging them in again
• Initializing the settings (do 2 while this unit is ON)
• Updating the firmware