Epson PowerLite W70 2000 Lumen WXGA Laser 3LCD Projector Installation Guide

EPSON PowerLite W70 2000 Lumen WXGA Laser 3LCD Projector

IMPORTANT: Before using this product, make sure you read these instructions and the safety instructions in the online User’s Guide.

Make sure your projector box includes all of these parts:You can place the projector on almost any flat surface. See the online User’s Guide for more information.

Connect the projector

External video source
You can connect an external video source with an HDMI cable (not included).
Caution: Do not turn on the video source before connecting it to the projector; you may damage the projector.

Note: Some external video sources may require an optional HDMI adapter cable.

Remove the rear cover of the projector.
Connect an HDMI cable to your video source’s HDMI output port.
Connect the other end of the HDMI cable to the projector’s HDMI extension cable.
Pass the HDMI cable through the cable path as shown.
Replace the rear cover of the projector.

Streaming device

You can connect a streaming device inside the projector, such as an Amazon Fire™ TV Stick or Roku® Streaming Stick®.
Note: The projector’s HDMI port does not support MHL.

Remove the rear cover of the projector.
Open the USB power cable clamp.
Connect your streaming device to the projector’s HDMI extension cable.
Connect the USB power cable to your streaming device and make sure the device fits securely inside the projector.
Device’s power port on the side
Device’s power port on the bottomCaution: Do not force a device into the projector; you may damage the projector or the device.
Pass the USB power cable through the hook and clamp, depending on the location of the power port on your streaming device as shown below, then close the clamp to secure the cable.
Device’s power port on the side
Device’s power port on the bottom
Replace the rear cover of the projector.

Turn on the projector

Plug in the projector.
Press the power button on the projector or the projector remote control. The power light flashes blue, then stays on.
The default language of the menu system is English. To select another language, press the menu button on the projector remote control. Select Settings and press Enter. Select Language and press Enter. Select your language and press Enter. Press the menu button to exit.
Note: To shut down the projector, press the power button on the projector or the remote control, then press the button again to confirm, if necessary.

Adjust the image

Move the focus lever on top of the projector left or right to adjust the image sharpness.
To adjust the image height, press and hold the foot release lever on the bottom of the projector to extend the front adjustable foot. Release the lever to lock the foot in the desired position.

Using the remote control

Install the batteries as shown (two AAA batteries).See the online User’s Guide for more information on using the remote control.

Troubleshooting

If you see a No signal message after turning on the projector, make sure your streaming device or HDMI cable is properly connected.
If you see a blank screen, check the following:
Make sure the power light on the projector is blue and not flashing.
Press the power button to wake the projector from standby or sleep mode, if necessary.
If you see a blank screen when a computer is connected, check the following:
On some Windows® laptops, you may need to hold down the Fn key and press F7 or the function key that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as . On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.
If you’re using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.
If the projector does not respond to remote control commands, make sure the batteries in the remote control are installed correctly. Replace the batteries if necessary.
The projector’s USB power cable can provide 2.0A of power. Make sure your streaming device supports this specification.

Registration

Where to get help

Manual
For more information about using the projector, you can view or download the online manual from the Epson website, as described below.

Internet support
Visit www.epson.com/support (U.S.) or www.epson.ca/support (Canada) and search for your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson.

Telephone support services
To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Optional accessories

For a list of optional accessories, see the online User’s Guide.
You can purchase accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epsonstore.ca (Canadian sales).

Notices

Bluetooth Safety and Specifications
Contains Bluetooth® module model: DBUB-E207
This document provides safety instructions and describes the specifications. Read this document carefully before use to ensure your safety and product performance.
Data transmission is always initiated by software, which is the passed down through
the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinues transmission in case of either absence of information to transmit or operational failure.
This equipment is restricted to indoor operation only.

U.S. FCC Notices

Contains FCC ID: BKMAE-E207
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

WARNING: The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and
may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Industry Canada (IC) Notices

Contains IC: 1052D-E207
CAN ICES-3 (B)/NMB-3 (B)

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm
(7.9 inches) or more away from person’s body.

Supplier’s Declaration of Conformity

According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers:

We: Epson America, Inc.
Located at 131 Katella Ave, Los Alamitos, CA 90720
Telephone: (562) 981-3840

Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR §2.906. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Trade Name: Epson®
ype of Product: LCD Projector
Model HA20A
Marketing Name: PowerLite W70/W75

Options

Product name	Model
Remote controller	2192767xx (x = 0-9)

Epson America, Inc. Limited Warranty

Two-Year or 12,000-hour Projector Limited Warranty

A . What Is Covered: Epson America, Inc. (“Epson”) warrants to the purchaser of the Epson product enclosed with this limited warranty statement that the product, if purchased and operated in the United States, Canada, or Puerto Rico, will be free from defects in workmanship and materials for a period of two (2) years from the date of original purchase or 12,000 hours of use, whichever occurs first.
B. What Epson Will Do To Correct Problems: If your product requires service during
the limited warranty period, please call Epson at the number at the end of this statement and be prepared to provide the model, serial number, and, if required, date of original purchase. This line will be answered during Epson’s regular support hours (currently 6:00 AM to 8:00 PM Pacific Time, Monday through Friday, and 7:00 AM to 4:00 PM on Saturday – subject to change). You may also need to provide proof of purchase if warranty coverage cannot be verified by the serial number. If Epson confirms warranty service is required, Epson will, at its option, exchange or repair the product without charge for parts or labor. If Epson authorizes an exchange for the defective unit, Epson will ship a replacement product to you, freight prepaid,
as long as you use an address in the United States, Canada, or Puerto Rico. The replacement product may be new or refurbished to the Epson standard of quality.
(The replacement product may not include promotional materials, accessories, documentation, manuals, software, or cables.) You are responsible for securely packaging the defective unit and returning it to Epson within five (5) working days of receipt of the replacement. Epson requires a debit or credit card number to secure the cost of the replacement product in the event that you fail to return the defective one. If Epson authorizes repair instead of exchange, Epson will direct you to send your product to Epson or its authorized service center, where the product will be repaired and sent back to you. You are responsible for securely packaging the product and for all postage or shipping costs to and from the Epson authorized service center. When warranty service involves the exchange of the product or of a part, the item replaced becomes Epson’s property. If service cannot be provided on the product for any reason and Epson no longer sells the same model, Epson will replace your product with a model of equal or superior value. Replacement products or parts assume the remaining warranty period of the original product covered by this limited warranty and are subject to its 12,000-hour use limitation.

What This Warranty Does Not Cover:

Any damage caused by misuse, abuse, improper installation, or neglect; disasters such as fire, flood, or lightning; or improper electrical currents, software, or interaction with non-Epson products
Any damage caused by or any service for third-party software, applications, parts, components, or peripheral devices added to the product after its shipment from Epson, such as dealer- or user-added boards, components, or cables
Any damage caused by installing the product next to a heat source or directly in the path of an air vent or an air conditioner
Damage due to excessive, continual usage
Damage caused by failure to properly maintain the product (see your online User’s Guide for details)
Service when the product is used outside the U.S., Canada, or Puerto Rico
Warranty service if the product label, logo, rating label, or serial number has been removed
Consumables such as filters or any items that are identified as being replaceable by the user in the product documentation (see your online User’s Guide for details)
Loss of data
Installation or removal
Any damage from service performed by anyone other than an Epson Authorized Servicer
Damage resulting from operation or storage in areas with smoke, oil, high humidity, steam, corrosive gases or chemicals, excessive dust, vibration, or shock
Cosmetic damage caused by handling or normal wear and tear during use
Any product or parts purchased as used, refurbished, or reconditioned
Any damage caused by using improper packaging materials or improper packaging and shipping when returning a product for repair or replacement. You will be invoiced for such shipping damage to product.

This warranty is not transferable. Epson is not responsible for your data or applications, which cannot be restored and should be backed up by you. Postage, insurance, or shipping costs incurred in presenting your Epson product for carry-in warranty service are your responsibility. If a claimed defect cannot be identified or reproduced in service, you will be held responsible for costs incurred.

D. DISCLAIMER OF WARRANTIES: EPSON’S SOLE AND EXCLUSIVE LIABILITY AND
YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY SHALL BE LIMITED TO EITHER, AT EPSON’S OPTION, REPAIR OR REPLACEMENT AS SET FORTH ABOVE. THE WARRANTY AND REMEDY PROVIDED ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATION MADE BY ANY OTHER PERSON OR FIRM ARE VOID. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG IMPLIED WARRANTIES LAST, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
E. EXCLUSION OF DAMAGES; EPSON’S MAXIMUM LIABILITY: IN NO EVENT SHALL EPSON OR ITS AFFILIATES BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR ANY LOST PROFITS, COST OF SUBSTITUTE EQUIPMENT, DOWNTIME, CLAIMS OF THIRD PARTIES, INCLUDING CUSTOMERS, OR INJURY TO PROPERTY, RESULTING FROM THE USE OR INABILITY TO USE THE EPSON PRODUCT, WHETHER RESULTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL THEORY. IN NO EVENT SHALL EPSON OR ITS AFFILIATES BE LIABLE FOR DAMAGES OF ANY KIND IN EXCESS OF THE ORIGINAL RETAIL PURCHASE PRICE OF THE PRODUCT. SOME STATES DO NOT ALLOW EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
F. Disputes, Arbitration, Governing Laws:

Both you and Epson agree that any controversy or claim arising out of or relating to Epson products or services or this agreement, shall be resolved by arbitration on an individual, non-class, non-representative basis, rather than in court. The arbitration shall be governed by the rules of JAMS that are in effect when the arbitration is filed, excluding any rules that permit arbitration on a class or representative basis and under the rules set forth in this agreement.
The arbitrator, and not any federal, state, or local court or agency shall have
the exclusive authority to resolve any dispute relating to the interpretation, applicability, enforceability, or formation, including but not limited to, any
claim that all or any part is void or voidable. JAMS rules are, available at http://www.jamsadr.com or by calling 1-800-352-5267. Disputes shall be resolved by a single neutral arbitrator, and both parties shall have a reasonable opportunity to participate in the selection of the arbitrator. If you wish, you may appear at the arbitration by phone. The arbitrator is bound by the terms of this agreement.
Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you agree to try, for sixty (60) days, to resolve any dispute informally by contacting
us at Please include your name, address and contact information, the facts giving rise to the dispute, and the relief requested. You agree to act in good faith to resolve the dispute, but if you and Epson do not reach a resolution within the sixty (60) days, you may commence an arbitration.
Opt-out. You may elect to opt-out (exclude yourself) from the final, binding, individual arbitration procedure and waiver of class and representative proceedings specified in this agreement by sending a written letter to Epson America, Inc., ATTN: Legal Department, 3840 Kilroy Airport Way, Long Beach, CA 90806 (effective August 2020: 3131 Katella Ave., Los Alamitos, CA 90720), within thirty (30) days of your purchase of the Epson products and/or services that specifies (i) your name, (ii) your mailing address, and (iii) your request to be excluded from the final, binding, individual arbitration procedure and waiver of class and representative proceedings specified in this Section F. In the event that you opt-out consistent with the procedure set forth above, all other terms shall continue to apply, including the requirement to provide notice prior to litigation.
There is no judge or jury in arbitration and your grounds for appeal are limited, however, the arbitrator is empowered to grant relief and award you the same damages as a court could, including declaratory or injunctive relief. Judgment on the arbitration may be entered in any court having jurisdiction.
Notwithstanding the foregoing, you may bring an individual action in a small claims court of your state or municipality if the action is within that court’s jurisdiction and is pending only in that court.
Notwithstanding the foregoing, we also both agree that you or we may bring suit in court to enjoin infringement or other misuse of trademark, patent infringement, copyright, or trade secret.
Any action must be brought within one (1) year of the expiration of the warranty.
If any provision in this Section F is found to be unenforceable, that provision shall be severed with the remainder of this agreement remaining in full force and effect. The foregoing shall not apply to the prohibition against class or representative actions. This means that if Section 9 (below) is found to be unenforceable, the entire Section 9 (but only Section 9) shall be null and void.
We each agree that any dispute resolution proceedings will be conducted only on an individual basis and not in a class, consolidated, or representative action.
This Section F is governed by the Federal Arbitration Act.

G. Other Provisions:

Other Rights You May Have: This warranty gives you specific legal rights, and you may also have other rights which vary from jurisdiction to jurisdiction. Some jurisdictions do not allow limitations on how long an implied warranty lasts, or allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
Warranties in Canada: In Canada, warranties include both warranties and conditions.
Governing Law: Except for any claims subject to arbitration pursuant to Section F, you and Epson agree that the law of the state where you reside shall govern.
Venue: Except for claims subject to arbitration pursuant to Section F, in the event of a dispute you and Epson both consent to the jurisdiction of your state of residence or, if none, then of the courts in Los Angeles County, California.

To find the Epson Authorized Reseller nearest you, please visit www.epson.com in the U.S. or www.epson.ca in Canada.
To find the Epson Customer Care Center nearest you, please visit
www.epson.com/servicecenterlocator in the U.S. or www.epson.ca/servicecenterlocator in Canada.
To contact the Epson ConnectionSM, please call (800) 637-7661 or (562) 276-4394 in the U.S. and (905) 709-3839 in Canada.

EPSON and PowerLite are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.

PrivateLine is a registered trademark and Epson Connection is a service mark of Epson America, Inc.

Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Mac is a trademark of Apple Inc., registered in the U.S. and other countries.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

Download

Epson PowerLite W70 2000 Lumen WXGA Laser 3LCD Projector Installation Guide

Was this manual helpful?