HP 510 Series All-In-One Smart Tank Printer User Guide
HP Smart Tank 510 series
Setup Guide
1
Turn on the printer.
Fill ink tanks.
Close doors.
Open doors. Wait for the carriage to move to the center and stop. Turn the orange handle.
Press down on the blue latch to open.
Remove and discard orange plastic pieces. Handle carefully to avoid ink stains.
Install printheads. Close blue latch and doors.
Load paper.
Scan the alignment page printed by pressing
Install HP Smart software from 123.hp.com or your app store (required). Use a computer or mobile device.
Trouble getting started? Find setup information and videos online.
If moving printer outside home or office with ink tanks filled, see “Moving printer?” guide to prevent ink leakage or printer damage.
Note: When unpacking the printer for the first time, retain the packing materials for repacking.
hp.com/support/smarttankmoving
The Apple logo is a trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
Android, Google Play, and the Google Play logo are trademarks of Google Inc.
Printed in China
Impreso en China
Impresso na China
© Copyright 2020 HP Development Company, L.P.