Cisco 6823 IP DECT Handset User Guide
Cisco IP DECT 6823 Handset Quick Start Guide
Your Handset
- Indicator light (LED)
- Headset port
- Softkeys, phone control buttons (Speaker, Menu), Navigation cluster (Navigation ring and Select button, call control buttons (Answer/Send, Power/End)
- Keypad
- Volume and Mute buttons
Turn On Your Handset
Press and hold Power/End
Turn Off Your Handset
Press and hold Power/End
Lock the Handset Keypad
You can lock the handset keypad to stop accidental dialing. When you lock the keypad, you can still dial emergency numbers. The softkey label doesn’t display when you lock the keypad.
Press and hold Zero (0)
Make a Call
- When your handset is idle, enter the phone number with the keypad.
- Press Answer/Send
Dial an Emergency Number
- When your handset is idle, enter the emergency number with the keypad.
- Press Answer/Send
.
Answer a Call
Press Answer/Send
Hold and Resume a Call
- From an active call, press Hold.
- Press Resume to pick the call back up.
Mute Your Call
- Press Mute
. - To unmute yourself, press Mute again.
Create a Conference Call
- From an active call, press More > Conference.
- Enter the coworker’s number and press Answer/Send
- Press Conf after the coworker answers.
Transfer a Call
- From an active call, press More > Transfer.
- Enter the coworker’s number and press
Answer/Send . - Press Transfer after the first ring tone or after your coworker answers.
Add a Contact
- Press Recents and highlight the recent caller.
- Press More, highlight Save as Contact, and press Select.
- Highlight the category, press Select, and press Save to save the number.
- (Optional) Highlight a field to add or replace other information.
- Press Save and press Yes.
Call a Local Contact
- Press Contacts and highlight an entry.
- (Optional) Press the right on the Navigation ring
to select an alternate number. - Press Call.
Call a Directory Contact
- Press Directory.
- Scroll down to highlight an entry or press Search, enter a name, and press Search.
- Press Line and select a line to call on.
- Press Select.
View Your Recent Calls
- Press Recents.
- Press the Navigation ring
left or right to view different lists.
Use Push to Talk
- Press and hold Mute
. - Talk when connected and release Mute at the end of your message.
Assign a Speed-Dial Number
- Press Contacts:
- Highlight a contact.
- Press More select Speed Dial.
- To reuse an existing speed-dial index entry, highlight a number, press Unassign, and press Yes.
- Highlight an empty speed-dial index and press Add.
- Press Power/End
Access Your Voicemail
- Press and hold One until you hear the ringtone.
- Follow the voice prompts.
Change the Volume on a Call
While on a call, press Volume
Set Do Not Disturb
- Press Menu
. - Select Settings > Do not disturb.
- Select Disabled (default) to turn off DND or select Enabled to turn on DND.
- Press Select to save the setting.
Set the Coverage Warning
- Press Menu
. - Select Settings > Audio Settings.
- Highlight Coverage warning.
- Press Off to stop the tone or press On to play the tone.
User Guide
View the full User Guide at https://www.cisco.com/c/en/us/support/collaboration-endpoints/ip-dect-6800-seriesmultiplatform-firmware/products-user-guide-list.html.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)