Philips LED Batten BN058C Mounting Instructions
LED Batten/LED
BN058C
Mounting Instruction
Product type | Voltage/Frequency | Power | Color Temp | Life Time @ta25°C | Dimension(L×W×H) |
BN058C LED11/L1200 | 220-240V~ 50/60Hz | 13W | 15,000 hours | 1185×21×32.3 mm | |
BN058C LED9/L1000 | 11W | 3000K | 985×21×32.3 mm | ||
BN058C LED9/L900 | 9.6W | 4000K | 885×21×32.3 mm | ||
BN058C LED5/L600 | 6.5W | 6500K | 585×21×32.3mm | ||
BN058C LED3/L300 | 3.4W | 325×21×32.3mm |
Batten mounting
Installationon ceiling or wall through mounting clips.
Mounting distance(L)
Unit/(mm)
Type | L300 | L600 | L900 | L1000 | L1200 |
L | 200-260 | 300-500 | 600-800 | 700-900 | 800-1100 |
- Wire connection I
Use 2-pin plug* for power connection.
*2-pin plug is not provided. - Wire connectionII
Using wire connection box* for power connection.
*Wire connection box and Connector is not provided.
Connector dimensions:
10 mm×20mm×25mm.
10mm×20mm×25mm。 - Linking method I
Click fit male plug part into the female socket. Affix next system, only after linking.
The maximum amount of linking: 8pcs - Linking method II
Use connector jack cable(Not provided in this pack)
for linking, as required.
The maximum amount of linking: 8pcs.
Signify Luminaires (Shanghai) Co., Ltd.
Address: 2F, Building 6, No. 1805, Huyi Highway, Malu Town, Jiading District, SH, PRC
Postcode: 201801
Operation Instruction
- The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements.
- Do not use the fixture if housing or power cables are damaged.
- The product is suitable for ceiling, surface & cover mounting.
- Do not use in supply voltage exceeding 220-240V±10% for extended periods.
- Do not place readily flammable material near the lamp.
- In case of operation failure, please switch off the power and contact your nearest dealer.
- The manufacture will not be held responsible for improper usage or modification of the product.
- This product allows a maximum of 8 pcs trunking (via a connector or end-to-end trunking). For your safety concern, the connection of BN058C with any other product is prohibited.
- Please switch off the power supply before changing the product or connection!
- Max current of power cable: 2A.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced
- The corrosive atmosphere or hazardous materials such as sulfur, chlorine, phthalate, etc must be avoided during use and storage.
- This product is designed only for indoor use, please do not use it anywhere humid, wet, or outdoor.
12NC:444100099181 | ||||||
(Pb) | (4g) | (Cd) | (Cr (VI) ) | (PBPO | (PBDE) | |
0 | 0 | 0 | 0 | 0 | 0 | |
X | 0 | 0 | 0 | 0 | ||
0 | 0 | 0 | 0 | 0 | 0 | |
0 | 0 | 0 | O | 0 | 0 | |
SJ/T 11364 0: GB/T 26572 X: GB/T 26572 |
Applicable to China Only
Signify Luminaires (Shanghai) Co., Ltd.
Address: 2F, Building 6, No. 1805, Huyi Highway, Malu Town, Jiading District, SH, PRC
Postalcode: 201801
Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N.V
Was this manual helpful?
Thank you for your feedback!