Philips HC9450 Hair Clipper User Guide

Hair Clipper HC9450

Always here to help you
Register your product and get support at www.philips.com/welcome

Package Contents

Charging

Using

There are 3 ways to go through the length settings:

1. Quickly swipe your thumb or a finger across the touch area to scroll through the length settings quickly.
2. Slowly swipe your thumb or a finger across the touch area to scroll through the length settings slowly.
3. Tap on the bottom or top part of the touch area to go through the length settings one by one.
4. To scroll through the length settings automatically in steps of 0.1mm, tap and hold the bottom or top part of the touch area.

Memory:

1. The memory allows you to save 3 lengths per comb.
2. To select a memorised length, press the ‘M’ button.
3. To switch between memory settings, press the ‘M’ button.
4. To save a length setting in the memory, press the ‘M’ button for 2 seconds.

Length lock:

You can only change the length setting if the appliance is switched off.