Lenovo LP3 Thinkplus Live Pods User Manual

Lenovo LP3 Thinkplus Live Pods

Packing list

Reminder

  1. Except for the operation methods specifically marked in the manual,please do not try to disassemble or replace any parts in the earbuds.
  2. Don’t put the earbuds in the water or any others liquid.the earbuds are not waterproof.
  3. If any liquid enters the product by accidentally, please disconnect and remove the connection immediately.
  4. Please make sure that there is no water on your hands when installing or uninstalling the product to avoid electric shock .
  5. Do not put the product near by the heat source or expose it to the fire source directly.
  6. Do not put the product in the environment with strong electromagnetic force, otherwise it will cause product malfunction.

Earphone specification

  • Transmission distance: ≥ 10M
  • Battery capacity: 40mAh
  • Length of use: about 6 hours (headphones)
  • Charging time: about 1.5 hours (headphones)
  • Rated input: 5v (30mA)

Charging case specification

  • Battery capacity: 300mAh
  • Charging time: about 1.5 hours
  • Rated input: 5v (300mA)
  • (all technical information is subject to actual performance)

Charging the box

Charging status: Blinking red lights.
Charged: Normally on a red lights.

(Warm tip: put the earphone i.n the charging box, the green light of the white light is on once every 5 seconds when the warehouse is in low power, please charge the charging box in time.)

The led indicator status

 

 

 

 

 

 

Earphone

  

 

 

 

Put the earphone in the charging box and charge the earphone automatically

 On state: white light for 1 seconds.

Pairing state: the white light on the main ear is blinking (the light on the secondary ear is off). Connected: The Led light is off.

Music/Call status: The Led light is off.

Charging status: the white indicator is steady on. Charging complete: the lamp is off.

Low power: White on every 5 seconds. (Prompt once every two minutes)

 

 

 

 

Charging case

  

 

 

To charge the case use a type-c cable and 5v adapter.

  

Charge bay open/close cover: green light 4 seconds off

When the charging box is charging, the red light flashes

After the charging box is fully charged: The red light is always on

Product operation instructions

  1. turn on
    Method 1 : the earphone is taken out of the charging box and turned on automatically. Method 2 : Long press and touch for 2 seconds to manually power on.
  2. turn off
    Method 1: put the earphone back into the charging box and turn it off automatically; Mothod 2: In the BOOT state, long press the function key 6 seconds off.
  3. pairing
    Method 1: headset automatically interconnects when removed from the charging box (tws interconnects successfully) ; main ear white light flashes (auxiliary ear light goes out)
    Method 2: boot automatically into pairing mode (unpaired) left/right white light flashing if you want to connect to the earphones (support single ear use).

The operation of the touch button

Music Play Mode

  •  Left/Right earphone operation

Call mode

Factory data reset

If the left and right earphones are not connected to mobile phones and other related bluetooth devices after being turned on, click the left and right earphones touch button five times respectively, then Shut down the left and right earphones and put them back in the charging bay to regroup and enter the Bluetooth pairing state.

THE NAME AND CONTENT OF HARMFUL SUBSTANCES IN THE PRODUCT

This form is compiled in accordance with SJ/T 11364.
O : Indicates that the content of the hazardous substance in all homogeneous materials of the part is in below the limit required by GB/T 26572.
X : Indicates that the hazardous substance at least in a certain homogeneous material of the part exceeds The limit requirements specified in GB/T 26572.
The parts marked with “X” on the form are all harmful due to the limitations of global technological development. Substitution of

Printed circuit board components:
Including printed circuit boards and their parts, electronic components, etc. and depending on the product model, the earbuds you purchased may not contain all the above components.

Electronic and electrical products sold in the People’s Republic of China 2. Altering the warranty card and product code does not match the product body;
must mark this Logo, the number in the logo represents the product under 3. Causes caused by misuse,abuse or improper transportation,use,maintenance or storage normal use Environmental protection use period.

WARRANTY STATEMENT

Disclaimer:
This user manual does not have any form of guarantee, position expression or other implication. The mentioned products,specifications and information are for reference only,and the content will also be updated on the web at any time without additional separate notice.

Warranty Statement:
The product attached to this document is guaranteed as follows: If the product is twelve (12) months from the date of purchase(“Warranty Period”), under normal conditions of use due to quality defects damaged, can be repaired. Free repair; free replacement if the manufacturer confirms that it cannot be repaired; repaired or replaced product. Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days). Purchased by sale the ticket date shall prevail;if the purchase date cannot be determined, the warranty period shall be 13 (13) Monthly calculation.
If you apply for a warranty, please call the product service hotline first and execute it in the manner instructed by us. When applying for a warranty, you need to provide an accurate, complete and clearly filled out valid sales invoice. The above guarantee does not apply to the following situations:

  1. Exceeding the validity period of the three packs;
  2. Altering the warranty card and product code does not match the product body;
  3. Causes caused by misuse, abuse or improper transportation, use, maintenance or storage obstacles or damage;
  4. Failure or damage caused by force majeure (such as earthquake, war, disaster, etc.) or accident bad;
  5. The zipper and tower buckle is damaged due to excessive force;
  6. Disconnection or tearing caused by the excessive load;
  7. Any damage caused by sharp objects;
  8. Products with signs of burning of flooding;
  9. Damage caused by unauthorized disassembly;
  10. Aging, discoloration, abrasion, rupture and other losses that occur during the normal use of the product.
    Warranty statement：
  11. If the original identification label of the product is changed or damaged, this guarantee will become invalid.
    The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee.You should check on the spot and raise objections to any discrepancies.

The above guarantees are all guarantees we make regarding the products,and are only applicable in mainland China.Nothing in this document affects consumer rights that cannot be excluded or restricted under the law profit.
Service supervision hotline: 400-812-0102 After-sales mailbox:[email protected]

Is a trademark of a company owned by Lenovo Group. The names of other companies, products and services mentioned may be trademarks of other companies.
Copyright 2021 Lenovo Group and its licensors. All rights reserved.