Dell Latitude 5430 Rugged Laptop User Guide
Quick Start
Latitude 5430 Rugged
Regulatory Model/Type
P148G/P148G001
MCMC certification marks
Windows
In Windows Search, type System. In the search results, click System.
Ubuntu
On the desktop, click
The import Oleh:
PT Dell Indonesia
Menara BCA Lantai 48 Unit 4804
Jalan M.H Thamrin No. 1 Jakarta Pusat,
10310 Indonesia
Connection and use of this communications equipment are permitted by the Nigerian Communications Commission.
RoHS CNS15663, http://www.dell.com/learn/tw/zh/twcorp1/envt-info-materials
Read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at Dell.com/regulatory_compliance.
Regulatory Compliance Homepage. Dell.com/regulatory_compliance
Power Adapter | |
Input voltage | 100-240 V AC |
Input current (maximum) | 1.5 A |
Input frequency | 50-60 Hz |
Output current | 3.25/4.5 A |
Output voltage | 20 V DC |
Maximum operating temperature | 35°C |
Connect the power adapter or the power cable to your computer and to the display, if required.
Power on the computer (and the display, if connected).
Icons | |
Power adapter | |
USB 2.0 | |
USB 3.0 | |
USB 3.0 with PowerShare | |
USB 3.1 Type-C | |
eSATA | |
Thunderbolt | |
Thunderbolt 3 port with Power delivery (USB-C) |
Icons | |
Network | |
VGA | |
DVI | |
HDMI | |
DisplayPort | |
Mini DisplayPort | |
TV-in | |
External Graphics Port | |
Infrared (IR) emitter |
Icons | |
Headphone/Audio-out | |
Headset | |
Microphone | |
Line-in | |
Line-out/Speakers: front left-right | |
Speakers: rear left-right |
Icons | |
Speakers: side left-right | |
Speakers: Audio center/subwoofer | |
S/PDIF | |
Screen-rotation lock | |
SIM-card slot | |
ExpressCard slot |
Icons | |
Media-card reader | |
Security-cable slot | |
Power/Battery-status light | |
Battery-status light | |
Hard-drive activity light | |
Wi-Fi light | |
Bluetooth light |
Views
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Radiation Exposure Statement:
The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
Industry Canada statement
This device complies with ISED’s license-exempt RSS. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.