Asus Pen 2.0 SA203H Active Stylus User Guide

ASUS Pen 2.0
Active Stylus SA203H
E19301 First Edition October 2021

Getting to know your ASUS Pen 2.0 (Active Stylus)

Package contents

• ASUS Pen x 1 (Model Name: SA203H)
• Pen tip x 4 (2H x 1, H x 1, HB x 1, B x 1)
• USB Type-C® charging cable x 1
• Quick Start Guide x 1

LED indicator lights

Getting started

1. Charging your ASUS Pen
   A. Gently pull the USB Type-C® port cover to reveal the port.
   B. Align and place the bundled USB Type-C® charging cable onto the USB Type-C® port.
   C. Connect the USB charging cable to a power source to start charging.
   NOTE: To activate your ASUS Pen, ensure to charge your ASUS Pen before using it for the first time.
2.  Pairing your ASUS Pen with the Bluetooth device
   A. Ensure the other device is Bluetooth enabled.
   B. Press and hold the Bluetooth button on your ASUS Pen until the LED indicator starts blinking blue light.
   C. On the other device, select “ASUS Pen” from the Bluetooth device list to start pairing.
   D. The LED indicator will turn white once the pairing process is complete.
   

Replacing the pen tip of your ASUS Pen
A. Locate the teardrop-shaped slot on the packaging tray.
B. Hold your ASUS pen vertically, then align and slide the current pen tip into the narrow slot.
C. Ensure the slot is positioned between the pen tip and the pen, then pull your ASUS pen vertically and remove the pen tip.
D. Choose the pen tip you wish to replace, then align and fit the new pen tip.

Notices
Simplified EU Declaration of Conformity
ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity available at https://www.asus.com/support/.

CE RED RF Output table (Directive 2014/53/EU)

Simplified UKCA Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/.

UKCA RF Output table (The Radio Equipment Regulations 2017)

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT EQUIPMENT AUTHORIZATION REQUIREMENT.
Devices operating below 490 kHz in which all emissions are at least 40 dB below the limits in §15.209 shall be verified pursuant to the procedures in Subpart J of part 2 of this chapter prior to marketing. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Important Notice
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Caution:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment.

CE Mark Warning
This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic
Development Canada licence exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-003(B)/NMB-003(B)

Caution

• replacement of a BATTERY with an incorrect type that can defeat a SAFEGUARD (for example, in the case of some lithium BATTERY types);
• disposal of a BATTERY into fire or a hot oven, or mechanically crushing or cutting of a BATTERY, that can result in an EXPLOSION;
• leaving a BATTERY in an extremely high temperature surrounding environment that can result in an EXPL Caution OSION or the leakage of flammable liquid or gas;
• a BATTERY subjected to extremely low air pressure that may result in an EXPLOSION or the leakage of flammable liquid or gas.

KC: Korea Warning Statement

(This wireless/radio equipment has a possibility of radio interference during operation)
(This wireless/radio equipment can’t be used for services of safety in human life because it has a possibility of radio interference)

FCC COMPLIANCE INFORMATION
Per FCC Part 2 Section 2.107

Responsible Party: Asus Computer International
Address: 48720 Kato Rd., Fremont, CA 94538
Phone/Fax No: (510)739-3777/(510)608-4555
hereby declares that the product
Product Name : Active Stylus SA203H
Model Number : SA203H
compliance statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NCC: Taiwan Wireless Statement

R-R-MSQ-STYLUS-SA203H

https://qr.asus.com/ab92699
Visit our multi-language web site at https://www.asus.com/support.