LIEBHERR SGNEF4335 Frost Vertical Freezer User Guide
LIEBHERR SGNEF4335 Frost Vertical Freezer User Guide
The manufacturer works constantly on the further development of all the types and models. Therefore please understand that we have to reserve the right to make design, equipment and technical modifications.
To get to know all the benefits of your new appliance, please read the information contained in these instructions carefully.
The instructions apply to several models. Differences may occur. Text relating only to specific appliances is marked with an asterisk (*).
Instructions for action are marked with a , the results of action are marked with a .
1 Appliance at a glance
1.1 Description of appliance and equipment
Note
▶ Shelves, drawers and baskets are arranged for optimum energy efficiency on delivery.
- Rear transport handles
- Operating and control elements
- No Frost
- Drawer for herbs and berries
- Freezer pack*
- VarioSpace
- Drawers
- Type plate
- Adjusting feet
- Front transport handles, rear transport castors
1.2 Appliance range of use
Intended use
The appliance is only suitable for cooling food products in a domestic or household-like environment. This includes, for example, use:
– in staff kitchens, bed and breakfast establishments,
– by guests in country houses, hotels, motels and other accommodation,
– for catering and similar services in the wholesale trade.
The appliance is not suitable as a built-in unit.
All other types of use are not permitted.
Foreseeable misuse
The following applications are expressly forbidden:
– Storing and refrigerating medicines, blood plasma, laboratory preparations or similar substances and products based on the Medical Device Directive 2007/47/EC
– Use in areas at risk of explosions
Misusing the appliance may lead to damage to the goods stored or they may spoil.
Climate classifications
Depending on the climate classification the appliance is designed to operate in restricted ambient temperatures. The climate classification applying to your appliance is printed on the rating plate.
Note
▶ Keep to the specified ambient temperatures in order to guarantee that the appliance works properly.
The appliance will work properly down to a lower ambient temperature of 5 °C.
1.3 Conformity
The refrigerant circuit has been tested for leaks. This appliance complies with the applicable safety stipulations and with directives 2014/35/EU, 2014/30/EU, 2009/125/EG, 2011/65/EU and 2010/30/EU.
1.4 Product data
Product data is included with the appliance, as per Directive (EU) 2017/1369. The complete product data sheet is available on the Liebherr website under Downloads.
1.5 EPREL database
Details about energy labelling and Ecodesign requirements will be available on the European product database (EPREL) from 1st March 2021. You can access the product database at the following link: https://eprel.ec.europa.eu/ You will be asked to enter the model ID. You can find the model ID on the nameplate.
1.6 External dimensions of the appliance
* For appliances supplied with wall spacers, the measurement increases by 35 mm (see 4.2 Installing the appliance) .
1.7 Saving energy
– Pay attention to good ventilation. Do not cover ventilation holes or grids.
– Do not install the appliance in direct sunlight, next to an oven, radiator or similar.
– Energy consumption depends on the installation conditions, e.g. the ambient temperature (see 1.2 Appliance range of use) . A warmer ambient temperature can increase the energy consumption.
– Open the appliance for as short a time as possible.
– The lower the temperature is set the higher the energy consumption. – Keep all food properly packed and covered. This prevents frost from forming.
– Inserting warm food: allow to cool down to room temperature first. Dust deposits increase energy consumption:
– For refrigerators with heat exchangers dust the metal grid on the back of the appliance once a year.
2 General safety information
Danger for the user:
– This device can be used by children and people with impaired physical, sensory or mental abilities or with a lack of experience and knowledge provided that they are supervised or have received instruction in the safe use of this device, and about the resulting hazards. Children must not play with this appliance. Cleaning and user maintenance work must not be carried out by children without adult supervision. Children aged between 3 and 8 are allowed to load and unload the appliance. Children below the age of 3 must be kept away from the appliance unless they are under continuous adult supervision.
– When disconnecting the appliance from the supply, always take hold of the plug. Do not pull the cable.
– In the event of a fault pull out the mains plug or deactivate the fuse.
– Do not damage the mains power cable. Do not operate the appliance with a defective mains power cable.
– Repairs, interventions on the appliance and the replacement of mains connection line may only be carried out by After-Sales Service or other suitably trained specialist personnel.
– Only assemble, connect and dispose of the appliance according to the instructions.
– Please keep these instructions in a safe place and pass them on to any subsequent owners.
Fire hazard:
– The coolant used (information on the model plate) is eco-friendly but also flammable. Any leaking coolant may ignite.
- Do not damage the refrigerant circuit pipes.
- Do not handle ignition sources inside the appliance.
- Do not use electrical appliances inside the appliance (e.g. steam cleaners, heaters, ice cream makers, etc.).
- If the refrigerant leaks: remove any naked flames or ignition sources from the vicinity of the leakage point. Properly air the room. Inform customer services.
– Do not store explosives or sprays using combustible propellants such as butane, propane, pentane, etc. in the appliance. To identify these spray cans, look for the list of contents printed on the can, or a flame symbol. Gases possibly escaping may ignite due to electrical components.
– Keep burning candles, lamps and other items with naked flames away from the appliance so that they do not set the appliance on fire.
– Please be sure to store alcoholic drinks or other packaging containing alcohol in tightly closed containers. Any alcohol that leaks out may be ignited by electrical components.
Danger of tipping and falling:
– Do not misuse the plinth, drawers, doors etc. as a step or for support. This applies particularly to children.
Danger of food poisoning:
– Do not consume food which has been stored too long.
Danger of frostbite, numbness and pain:
– Avoid prolonged skin contact with cold surfaces or refrigerated/frozen goods or take protective measures, e.g. wear use gloves.
Danger of injury and damage:
– Hot steam can lead to injury. Do not use electrical heating or steam cleaning equipment, open flames or defrosting sprays to defrost.
– Do not use sharp implements to remove the ice.
Danger of crushing:
– Do not hold the hinge when opening and closing the door. Fingers may get caught.
Symbols on the appliance:
Please observe the specific information in the other sections:
3 Controls and displays
3.1 Operating and control elements
- Up setting button
- Down setting button
- Menu symbol
- Alarm symbol
- SuperFrost symbol
- Temperature display
- On/Off button
- SuperFrost button
- Alarm button
- Power failure symbol
- Child-proofing symbol
3.2 Temperature display
During normal operation, the display shows: – the highest freezing temperature
The temperature display flashes if/when:
– You change the temperature setting
– The appliance is not cold enough after switching on
– The temperature rises by several degrees Stripes flash in the display if/when:
– The freezer temperature exceeds 0 °C.
The following displays indicate a fault. Possible causes and solutions: (see 7 Malfunctions) .
– F0 to F9
– The power failure symbol
4 Putting into operation
4.1 Transporting the appliance
▶ Transport the appliance only in suitable packaging.
▶ Transport the appliance upright.
▶ Do not transport the appliance on your own.
4.2 Installing the appliance
Fire hazard due to dampness! If live parts or the mains lead become damp this may cause short circuits.
▶ The appliance is designed for use in enclosed areas. Do not operate the appliance outdoors or in areas where it is exposed to splash water or damp conditions.
Risk of fire due to short circuit! If the mains cable/connector of the appliance or of another appliance touch the rear of the appliance, the mains cable/ connector may be damaged by the appliance vibrations, leading to a short circuit.
▶ Stand the appliance so that it is not touched by connectors
or main cables.
▶ Do not plug the appliance or any others into sockets located
near the rear of the appliance.
Fire hazard due to refrigerant! The coolant used is eco-friendly but also flammable. Any leaking coolant may ignite. u Do not damage the piping of the refrigeration circuit.
Fire hazard and danger of damage!
▶ Do not place appliances emitting heat e.g. microwaves, toasters etc. on the appliance!
Blocked ventilation openings pose a risk of fire and damage!
▶ Always keep the ventilation openings clear. Always ensure that the appliance is properly ventilated!
If your appliance is not a side-by-side (SBS) appliance:
NOTICE
Risk of damage due to condensate!
▶ Do not install the appliance directly alongside a further refrigerator/freezer.
- Before you connect the appliance, report any damage immediately to the delivery company.
- The floor of the installation site must be horizontal and even.
- Do not install the appliance in direct sunlight, next to an oven, radiator or similar.
- The best place for installation is a dry and well ventilated room.
- Install the appliance with the rear panel up against the wall and always use the supplied wall spacers (see below).
- Only ever move the appliance when it is empty.
- The surface supporting the appliance must be at the same level as the surrounding floor.
- Do not install the appliance on your own.
- The more coolant there is in the appliance, the larger the room in which the appliance is installed must be. If the room is too small, any leak may create a flammable mixture of gas and air. For each 8 g of coolant the installation space must be at least 1 m3. Information on the coolant is on the model plate inside the appliance.
▶ Detach the connecting cable from the rear of the appliance, removing the cable holder at the same time because otherwise there will be vibratory noise!
▶ Remove the protective film from the outside of the appliance.*
NOTICE
Risk of damage from stainless steel care products! The stainless steel doors and stainless steel side panels are treated with a premium surface finish.
Stainless steel care products attack these surfaces
▶ Only use a soft, clean cloth to wipe down finished door and side panel surfaces and painted door and side panel surfaces. To remove heavy dirt, use a little water or neutral detergent. Alternatively, you can use a micro-fibre cloth.
▶ Remove all transit supports.
The spacers supplied with some appliances must be used to achieve the stated energy consumption. These will extend the depth of the appliance by approx. 35 mm. The appliance is fully functional if the spacers are not used, but does have a slightly higher energy consumption.
▶ In the case of an appliance with enclosed wall spacers, mount the wall spacers on the back of the appliance at the top left and right.
▶ Close the door. u Pull off the cover (10) forwards and upwards.
▶ Align the appliance so that it stands firmly and on a level by applying the accompanying spanner to the adjustable-height feet (A) and using a spirit level.
When a Side-by-Side appliance (S…) is fitted together with a second appliance (as a SBS combination):
▶Proceed according to the Side-by-Side combined fridge freezer installation instructions. (Accessories bag of the SBS freezer/appliance with freezer compartment)
Note
▶ Clean the appliance (see 6.2 Cleaning the appliance) .
If the appliance is installed in a very damp environment, condensate may form on the outside of the appliance.
▶ Always see to good ventilation at the installation site.
4.3 Changing over the door hinges
You can change over the door hinges if necessary.
NOTICE
Risk of damage to side-by-side appliances due to condensation!
When a side-by-side appliance (S…) is fitted together with a second appliance (as a SBS combination), the door hinges must remain as delivered.
▶ Do not change over the door hinges.
Ensure that the following tools are to hand:
- Torx® 25
- Torx® 15
- Screwdriver
- Battery-powered screwdriver, if necessary
- Second person for fitting work, if needed
4.3.1 Detaching the door
▶ Close the door.
▶ Pull off the cover (10) forwards and upwards.
▶ Lift off the cover (11).
Risk of injury if the door tips!
▶ Take good hold of the door.
▶ Set down the door carefully.
▶ Unscrew the upper turn hinge (12) (2x Torx® 25) (13) and lift it off.
▶ Lift off the door and set it aside.
4.3.2 Changing the bearing parts
▶ Lift out the bearing pin Fig. 5 (22) together with washer Fig. 5 (23) and adjustable-height foot* Fig. 5 (24).
▶ Lift off the stopper Fig. 5 (21).
▶ Unscrew Fig. 5 (26) the turn hinge Fig. 5 (25).
▶ Unscrew Fig. 5 (29) the bearing element Fig. 5 (28) , transfer it to the opposite location hole of the turn hinge and screw it firmly into place.
▶ Carefully lift off the cover on the handle side Fig. 5 (27), undo the screw Fig. 5 (40) and transfer both to the opposite side.
▶ Screw the turn hinge Fig. 5 (25) firmly into place on the new hinge side, possibly using a cordless screwdriver (with 4 Nm).
▶ Re-insert the stopper Fig. 5 (21) into the other hole.
▶ Re-insert the bearing pin Fig. 5 (22) together with the washer and adjustable-height foot*. In so doing, pay attention that the locating lug points backwards
4.3.3 Transferring the handle
▶Transfer the spring clamp Fig. 6 (31): Depress the latch nose and pull the spring clamp off over it.
▶ Slide the spring clamp into place on the new hinge side until it clicks into place.
▶ Lift the stopper (33) out of the door bearing bush and transfer it.
▶ Dismantle the door handle (32), stoppers (33) and pressure plates* (34) and transfer to the opposite side.
▶ When fitting the pressure plates on the opposite side, make sure they snap properly into place.*
4.3.4 Fitting the door
▶ Place the door from above onto the lower bearing pin Fig. 5 (22).
▶ Close the door. u Insert the upper turn hinge (12) in the door on the new hinge side.
▶ Screw the upper turn hinge (12) firmly into place (with 4 Nm)(2x Torx® 25) (13). Possibly make preliminary holes with a bradawl or use a cordless screwdriver.
▶ Snap the cover (10) and cover (11) into place at the opposite side.
4.3.5 Aligning the door
▶ Align the door to the appliance housing by way of the two oblong holes in the bottom turn hinge Fig. 5 (25). To do so, unscrew the middle screw.
Risk of injury due to the door dropping out! If the bearing parts are not screwed into place firmly enough, the door may drop out. This may lead to severe injuries. What is more, the door may not close and therefore the appliance may fail to cool properly.
▶ Screw the turn hinges firmly into place with 4 Nm.
▶ Check all of the screws and retighten if necessary.
4.4 Insertion into a row of kitchen units
* For appliances supplied with wall spacers, the measurement increases by 35 mm (see 4.2 Installing the appliance) .
The appliance can be built into kitchen units. A top cupboard Fig. 8 (2) can be added above the appliance in order to bring the appliance Fig. 8 (1) up to the height of the fitted kitchen units.
The appliance can be installed right next to the kitchen cabinet Fig. 8 (3). The appliance must stick out by the depth Fig. 8 (B) from the front of the cabinet so that the doors can be opened fully. The appliance may protrude further depending on the depth of the kitchen cabinets and whether wall spacers are used.
NOTICE
Danger of overheating due to insufficient air ventilation! The compressor may be damaged if there is insufficient air ventilation.
▶ Take care to ensure adequate air ventilation.
▶ Observe the ventilation requirements.
Ventilation requirements:
– There must be a ventilation shaft with the depth Fig. 8 (D) at the back of the top cupboard over the entire width of the cupboard.
– The ventilation shaft Fig. 8 (C) must be observed under the ceiling.
– the larger the ventilation space, the more energy-saving the appliance is in operation.
If the appliance is installed with the hinges next to a wall Fig. 8 (4) the distance Fig. 8 (E) between the appliance and the wall must be observed. This is how far the handle protrudes when the door is open.
4.5 Disposing of packaging
Danger of suffocation due to packing material and plastic film!
▶ Do not allow children to play with packing material.
– corrugated board/cardboard
– expanded polystyrene parts
– polythene bags and sheets
– polypropylene straps
– nailed wooden frame with polyethylene panel*
▶ Take the packaging material to an official collecting point.
4.6 Connecting the appliance
NOTICE
Failure to connect properly Damage to the electronics.
▶ Do not use a standalone inverter.
▶ Do not use an energy saving plug.
Failure to connect properly Fire hazard.
▶ Do not use an extension cable.
▶ Do not use distributor blocks.
The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see 1 Appliance at a glance) . The socket must be properly earthed and fused. The tripping current for the fuse must be between 10 A and 16 A. The socket must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency. It must be outside the area of the rear of the appliance.
▶ Check the electrical connection.
▶ Plug in the power plug.
4.7 Switching on the appliance
Note
The manufacturer recommends:
▶ Store frozen produce at -18 °C or colder.
Switch on the appliance approx. 2 hours before loading for the first time.
▶ Press On/Off button Fig. 3 (7).
▶ The temperature display and the alarm symbol flash until the temperature is sufficiently low. If the temperature is above 0 °C, dashes flash. If it is below, the current temperature flashes.
▶ To cool the interior as quickly as possible when the appliance is first put into operation, the appliance runs at a high rate, i.e. compressor runs at higher speeds. Therefore the noise level is a little higher for a short time. Afterwards the appliance continues to operate quietly in the energy-saving, normal mode.
▶ If “DEMO” is displayed, demo mode is activated. Please contact the after sales service.
5 Control
5.1 Brightness of the temperature display
You can adjust the brightness of the temperature display to the light conditions of the room in which the appliance is installed.
The function works with the door closed and is not relevant for appliances with a concealed screen.
5.1.1 Adjusting the brightness
5.2 Child proofing
5.2.1 Setting the child lock function
-or-
▶ Wait for 5 minutes.
▶ The temperature is indicated again in the temperature display.
5.3 Door alarm
5.3.1 Muting the door alarm
The audible alarm can be muted when the door is open. The sound switch-off function is active as long as the door is left open.
▶ Press alarm button Fig. 3 (9).
▶ The door alarm is silenced.
5.4 Temperature alarm
The cause of the temperature being too high may be:
– warm fresh food was placed inside
– too much warm ambient air flowed in when rearranging and removing food
– Prolonged power outage
– the appliance is faulty
The audible alarm is automatically silenced, the alarm symbol Fig. 3 (4) goes out and the temperature display stops flashing when the temperature is sufficiently cold again. If the alarm status persists: (see 7 Malfunctions) .
Note
Food may be spoilt if the temperature is not cold enough.
▶Check the quality of the food. Do not consume spoiled food.
5.4.1 Muting the temperature alarm
The audible alarm can be muted. When the temperature is sufficiently cold again, the alarm function is active again.
▶ Press alarm button Fig. 3 (9).
▶ The audible alarm is silenced.
5.5 Freezing food
The rating plate indicates the maximum quantity of fresh food you can freeze within 24 hours (see 1 Appliance at a glance) under “Freezing capacity … kg/24h”. Each drawer can hold a max. of 25 kg of frozen food. The shelves can each be loaded with 35 kg of frozen food. If the door cannot be opened right after having been closed, due to vacuum, please wait about 2 minutes until pressure returns to normal.
Risk of injury due to broken glass! Bottles and cans containing drinks may burst when being frozen. This applies particularly to sparkling drinks.
▶ Do not freeze bottles and cans containing drinks!
So that the food is rapidly frozen through to the core, do not exceed the following quantities per pack
– Fruit, vegetables up to 1 kg
– Meat up to 2.5 kg
▶ Pack the food in portions in freezer bags, reusable plastic, metal or aluminium containers
5.6 Thawing food
– in the refrigerator compartment
– in a microwave oven
– in a conventional or fan oven
– at room temperature
▶ Remove only as much food as is required. Use thawed food as quickly as possible.
▶ Food once thawed should be re-frozen only in exceptional cases.
5.7 Setting the temperature
The appliance is pre-set for normal operation.
The temperature can be set between -14 °C and -28 °C, the recommended temperature is -18 °C.
▶ To set the temperature higher: press Up button Fig. 3 (1).
▶ To set the temperature lower: press Down button Fig. 3 (2).
▶ When the button is pressed the first time, the previous value is indicated in the temperature display.
▶ To change the temperature in 1 °C steps: briefly press the button.
-or-
▶ To change the temperature continuously: hold down the button.
▶ The value is displayed flashing during the setting operation.
▶ The actual temperature is displayed approx. 5 seconds after the button is last pressed. The temperature gradually adjusts to the new value.
5.8 SuperFrost
With this function you can freeze fresh food quickly through to the core. The appliance operates with maximum refrigeration. The noise of the refrigeration unit may be temporarily louder as a result.
You can freeze as many kilograms of fresh food within 24 hrs as is indicated on the type plate under “Freezing capacity … kg/24hrs”. This maximum freezing quantity can vary depending on model and climate class.
You have to activate SuperFrost in good time, depending on how much fresh food is to be frozen: about 6 hours before placing the food inside in case of small amounts and about 24 hours in advance in case of the maximum amount of food to be frozen.
Wrap produce and spread it out as far as possible. Do not allow produce to be frozen to touch produce that is already frozen to prevent the latter thawing.
You do not have to activate SuperFrost in the following cases:
– when placing frozen food in the freezer
– when freezing up to approx. 2 kg fresh food daily
5.8.1 Freezing with SuperFrost
▶ Briefly press the SuperFrost button Fig. 3 (8) once.
▶ The SuperFrost symbol Fig. 3 (5) shines.
▶ The freezing temperature drops, the appliance operates with the maximum cooling capacity. For a smaller quantity of produce to be frozen: u wait approx. 6 h.
▶ Place wrapped produce in the deep bottom drawers. For the maximum quantity of produce to be frozen:
▶ wait approx. 24 h.
▶ Remove the deep bottom drawers and place produce directly on the bottom shelves.
▶ SuperFrost is automatically deactivated. Depending on the quantity placed inside, after 30 h at the earliest, 65 h at the latest.
▶ The SuperFrost symbol Fig. 3 (5) extinguishes once freezing is completed.
▶ Place produce in the drawers and push the latter back in again.
▶ The appliance continues to operate in the energy-saving, normal mode.
5.9 Drawers
Note
The energy consumption increases and the cooling performance decreases if there is insufficient ventilation. For appliances with No Frost:
▶ Leave the bottom drawer in the appliance!
▶ Always keep the air slits of the fan free at the rear wall!
▶ To store frozen food directly on the shelves pull the drawer 6 Maintenance forward and lift it out.
5.10 Shelves
5.10.1 Moving shelves
5.11 VarioSpace
5.12 Drawer for herbs and berries
In the drawer for herbs and berries you can freeze, berries, herbs, vegetables and other small items of food without them sticking together. Items being frozen will largely retain their shape, and it will be easier to remove exactly the right quantity later on.
5.12.1 Using the special drawer for herbs and berries
5.13 Freezer pack
Freezer packs prevent the temperature rising too quickly should there be a power cut.
5.13.1 Using freezer packs
6 Maintenance
6.1 Defrosting with No Frost
The No Frost system automatically defrosts the appliance. The moisture condenses on the evaporator, is periodically defrosted and evaporates.
▶ The appliance does not have to be manually defrosted.
6.2 Cleaning the appliance
Clean the appliance regularly.
Risk of injury and damage as a result of hot steam! Hot steam can lead to burns and can damage the surfaces.
▶ Do not use any steam cleaners!
NOTICE
Incorrect cleaning damages the appliance!
▶ Do not use cleaning agents in concentrated form.
▶ Do not use any scouring or abrasive sponges or steel wool.
▶ Do not use any sharp or abrasive cleaning agents, nor any that contain sand, chloride or acid.
▶ Do not use chemical solvents.
▶ Do not damage or remove the type plate on the inside of the appliance. It is important for the customer service.
▶ Do not pull off, bend or damage cables or other components.
▶ Do not allow any cleaning water to enter the drain channel,
ventilation grille or electrical parts.
▶ Please use soft cleaning cloths and a universal pH-neutral cleaning agent.
▶ Please use cleaning and care products suitable for contact with foodstuffs in the appliance interior.
▶ Empty appliance.
▶ Pull out the power plug.
▶ Clean plastic outer and inner surfaces with lukewarm water and a little washing-up liquid.
▶ Only use a soft clean cloth to wipe side walls with a paint finish. In the case of heavy soiling, use lukewarm water with neutral cleaning agent.
▶ Use only a soft clean cloth to wipe door surfaces with a paint finish. In the case of heavy soiling, use a little water or neutral cleaning agent. A micro-fibre cloth can be used optionally.*
Do not apply stainless steel cleaning agent to glass or plastic surfaces to prevent them from being scratched. Darker areas at the beginning and quite an intensive colour of the stainless steel surface are normal.*
NOTICE
Risk of damage from stainless steel care products! The stainless steel doors and stainless steel side panels are treated with a premium surface finish.
Stainless steel care products attack these surfaces
▶ Only use a soft, clean cloth to wipe down finished door and side panel surfaces and painted door and side panel surfaces. To remove heavy dirt, use a little water or neutral detergent. Alternatively, you can use a micro-fibre cloth.
▶ Clean drawers by hand with lukewarm water and a little washing up liquid.
▶ Clean other items of equipment by hand with lukewarm water and a little washing-up liquid.
After cleaning:
▶ Wipe dry the appliance and items of equipment.
▶ Connect the appliance and switch it on again.
▶ Switch on SuperFrost (see 5.8 SuperFrost) .
When the temperature is sufficiently cold:
▶ Put the food back inside.
6.3 Customer service
First check whether you can correct the fault yourself by reference to the list (see 7 Malfunctions) . If this is not the case, please contact the customer service whose address is given in the enclosed customer service list.
▶ Have any repairs and action – not expressly specified on the appliance and mains cable carried out by service personnel only. (see 6 Maintenance)
▶Read the appliance designation Fig. 9 (1), service No. Fig. 9 (2) and serial No. Fig. 9 (3) off the type plate located inside the appliance on the left-hand side.
▶ This will help us to provide you with a faster and more accurate service.
▶ Keep the appliance closed until the customer service arrives.
▶ The food will stay cool longer.
▶ Pull out the mains plug (not by pulling the connecting cable) or switch off the fuse.
7 Malfunctions
Your appliance is designed and manufactured for a long life span and reliable operation. If a malfunction nonetheless occurs during operation, check whether it is due to a handling error. In this case you will have to be charged for the costs incurred, even during the warranty period. You may be able to rectify the following faults yourself:
8 Decommissioning
8.1 Switching off the appliance
▶ Press On/Off button Fig. 3 (7) for approx. 2 seconds.
▶ The temperature display is dark.
▶ If the appliance cannot be switched off, the child lock function is active (see 5.2 Child proofing) .
8.2 Taking the appliance out of service
▶ Empty the appliance.
▶ Switch off the appliance (see 8 Decommissioning) .
▶ Remove mains connector. u Clean the appliance (see 6.2 Cleaning the appliance) .
▶ Leave the door open to prevent odour.
9 Disposing of the appliance
When disposing of the appliance, ensure that the refrigeration circuit is not damaged to prevent uncontrolled escape of the refrigerant it contains (data on type plate) and oil.
▶ Disable the appliance.
▶ Pull out the plug.
▶ Cut through the connecting cable.
Liebherr-Hausgeräte Marica EOOD
4202 Radinovo Bezirk Plovdiv Bulgarien
home.liebherr.com
https://www.facebook.com/LiebherrAppliancesIndia/?brand_redir=535355003206690