SEALEY MK74 Alloy Wheel Repair Painting Stand 4 Wheel Capacity Instruction Manual

ALLOY WHEEL REPAIR/PAINTING STAND
4 WHEEL CAPACITY
MODEL NO: MK74 

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT IS CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

Only use on firm, level, unobstructed surfaces which are capable of supporting the stand and wheels.
DO NOT overload.
Always load evenly with the center of gravity of the load as near the center as possible.
Apply the brakes before commencing work.
DO NOT stand/ride on the stand, or allow others to do so.
Replace or repair damaged parts. Use only recommended parts. Unauthorized parts may be dangerous and will invalidate the warranty.
◻ WARNING! Failure to comply with these instructions may result in loss of load, damage to the rack or other property, and/or personal injury.
◻ WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood that common sense and caution are factors that cannot be built into this product but must be applied by the operator.

INTRODUCTION

Will take four alloy wheels and enable the user to rotate the wheels on cones so the wheels can be repaired or painted without the need to lift and reposition them. Both supporting bars and cones have adjustable heights in order to have the most comfortable position for the user. Fitted with four castors, two with brakes for maximum maneuverability and safe positioning.

SPECIFICATION

Model No……………. ……………………MK74
Overall Length …………………………830mm
Max. Capacity……………………………100kg

ASSEMBLY

Assemble panel stands according to the parts diagram attached.

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner that is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534

www.sealey.co.uk