D-Link DCS-8350LH 2K QHD Indoor Wi-Fi Camera Installation Guide
D-Link DCS-8350LH 2K QHD Indoor Wi-Fi Camera
What’s in the Box
Simple Setup
Note: Please set up your device before mounting it.
- Get the my dlink app on the App Store or on Google Play. Launch the app, then Sign In or Create a New Account.
- Power on the device and wait for the Status LED to flash orange.
Note: Make sure that your mobile device’s Bluetooth is on. - Place your device next to your mobile device. A prompt will appear
- tap Add Device, then follow the app instructions.
LED Behavior
Setup Code
This is a backup of your device’s Setup Code. Please keep it as future reference for your device.
Mounting
To get the most out of your camera’s view and features, please take the following placement guidelines into consideration.
Height: Place the camera 1.5 – 2 meters (4 to 6.5 feet) from the ground.
Person Detection: Person Detection works best when the subject is between 2 to 5 meters (6.5 – 16 feet) away from the camera.
Pole Mounting
Note: Cable ties are not included with this product.
Place the mounting bracket against the pole where you would like to mount the camera, and make sure the arrow is pointing upwards.
Thread the cable ties through the slots on the mounting bracket. Make sure the textured side of the cable ties is facing the pole to avoid slippage. Then fasten the plastic ties around the pole to secure the mounting bracket.
Align the arrow on the camera base with the dot on the mounting bracket and turn clockwise to secure them together.
Wall Mounting
The device can be mounted on a wall or on the ceiling.
Align the mounting bracket so that the arrow is pointing up. Use a pencil to make marks in the two holes.
Use a 6 mm drill bit to drill two 26 mm deep holes over the pencil marks.
Hammer in the plastic anchors to support the screws.
Align the mounting bracket’s holes over the plastic anchors. Drive the screws into the anchors to secure the mounting bracket.
Align the arrow on the camera base with the dot on the mounting bracket and turn clockwise to secure them together.
Adjust your camera via its tilt and rotation options until you’re satisfied with the view point.
FAQ
What do I do if my device is not working properly?
Reset and reinstall your device. Use a paper clip to press the recessed Reset button and the LED will turn solid red. During installation, ensure that:
- Your router is connected to the Internet and Wi-Fi is enabled
- Your mobile device is connected to your router’s Wi-Fi and Bluetooth is enabled
- Your mydlink device is in range of your Wi-Fi network
How can I use voice commands to control my device?
The device will work with both Amazon Alexa and the Google Assistant. For setup instructions on these services, visit the following websites:
Amazon Alexa dlink.com/en/alexa
The Google Assistant: dlink.com/en/google-assistant
Why is my microSD card not working/not supported?
The microSD card must be formatted into the correct file system (FAT32) before it can be used with this product. This can be done in the mydlink app by selecting the Format function in the storage menu under the device settings.
What is my username and password for setting up my device with an ONVIF system?
To connect your device to an ONVIF system, key in “admin” as the username and use the PIN code of your mydlink device as the password. You can find the PIN code on your device’s label.
What is Color Night Vision and how does it work?
Color Night Vision is enabled by default and allows you to see color images while viewing the live feed in low light scenarios.
Need Help?
Having trouble installing your new product?
D-Link’s website contains the latest user documentation and software updates for D-Link products. Customers can contact D-Link Technical Support through our website by choosing the relevant region.
Contact Us
www.dlink.com/en/contact-us
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
IC Warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Note: 5150~5250MHz is Indoor use only