Motorola VM20 CONNECT 4.3 WiFi Video Baby Monitor User Guide

motorola VM20 CONNECT 4.3 WiFi Video Baby Monitor

Safety Instructions

WARNING:
Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.

Wi-Fi® CAMERA UNIT SET UP & USE:

• Choose a location for the Baby Unit that will provide the best view of your baby in his/her crib.
• Place the Baby Unit on a flat surface, such as a dresser, bureau or shelf, or mount the Baby Unit on a wall securely using the keyhole slots in the underside of the stand.
• NEVER place the Baby Unit or cords within the crib.

WARNING
This Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as de- scribed in the User’s Guide, safe to use. Therefore, always read the instructions in this User’s Guide carefully before using the device.

• Adult assembly is required. Keep small parts away from children when assembling.
• This product is not a toy. Do not allow children to play with it.
• This Baby Monitor is not a substitute for responsible adult supervision.
• Keep this User’s Guide for future reference.
• Keep the cords out of reach of children.
• Do not cover the Baby Monitor with a towel or blanket.
• Test this monitor and all its functions so that you are familiar with it prior to actual use.
• Do not use the Baby Monitor in damp areas or close to water.
• Do not install the Baby Monitor in extreme cold or heat, direct sunlight, or close to a heat source.
• Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack.
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adapters to easily accessible electrical sockets.

CAUTION
There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to their instructions. Use only the rechargeable battery pack with rating: 3.8V 2000mAh.

Getting Started

Connecting the Power Supply for the Baby Unit

• Insert the DC plug of the power adapter into the DC socket on the back of the Baby Unit.
• Connect the other end of the power adapter to a suitable electrical outlet.
• The baby unit turns on and the power indicator lights in Blue color.

Note: Only use the supplied power adapter (DC5V/1000mA).

Connecting the Power Supply of the Parent Unit

A rechargeable battery (Lithium ion battery 2000mAh) inside the Parent Unit allows you to move it without losing the link and picture from the Baby Unit. We recommend charging the for at least 16 hours before first use, and when the Parent Unit indicates the battery is low.

NOTE: When the Baby and Parent Units are both turned on and within range, the Parent Unit should show a color image from the Baby Unit camera, but if the room is dark, the image will be in black and white, with an icon showing, due to the infra-red illumination by the Baby Unit.

Desktop Stand of the Parent Unit

• The parent unit comes with a desktop stand attached to the back of the parent unit.
• To place the parent unit on a desk, simply pull out the stand as shown.

NOTE
Place the parent unit on a flat, even surface.

Registration (Pairing)

The Baby Monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures below:

1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until icon is highlighted, and the del / add / view / scan menu will pop up.
3. Press the + UP button or – DOWN button to select add, and press the O button to confirm.
4. Camera 1 / 2 / 3 / 4 will pop up. Press the + UP button or
   • DOWN button to select the desired Camera, and press the O button to start searching for a camera unit.
     Note: If a camera is currently paired with the Parent Unit, its camera location (with a * against it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the back of the Baby Unit until the Parent Unit finds the camera, beeps and PAIR OK appears on the screen. The video from the camera will then appear.

NOTE
A camera can only be registered to one Parent Unit at any one time.

Using the Baby Monitor

Setting Up

Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor.
Adjust the angle of the Baby Unit’s camera until you are satisfied with the image shown on the Parent Unit.
NOTE
Do not place the Baby Unit within the baby’s reach! If there is inter- ference with the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment.

Night Vision Mode

The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor on the top of the Unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the Parent Unit will display in black and white. The icon will be displayed at the top of the screen.

Talk Mode

Press and hold the TALK button T on the Parent Unit to talk to your baby through the Baby Unit’s loudspeaker.
The T icon will be displayed at the top of the LCD screen.

Video ON/OFF

Press V VIDEO On/Off button to turn the LCD screen on or off, whilst still leaving the audio monitor on.

Temperature Display (HH °C / °F or LL °C / °F)

The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen. The readings will turn RED if the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading will change to LL °C / °F if the temperature goes below 1°C / 34°F.

Parent Unit Menu Options

Volume

Press the Left or Right button to adjust the volume level.
The icon will pop up and you can select the desired volume from level 0~8. (The default volume level setting is level 5, and level 0 is OFF.)

Zoom

1. Press the M button and the menu bar will pop up with highlighted.
2. Press the + UP button or – DOWN button to select 1X or 2X zoom. (The default setting is 1X.)

Brightness

Press the + UP button or – DOWN button to select the desired brightness from level 1 ~ 8. (The default brightness is level 4.)

Audio Playlist

You can playback audio content – Lullabies, Soothing Sounds and Audio Book (English only) on the Baby Unit. The audio content can be downloaded and stored in the Baby Unit via Hubble App. You have 10 preloaded lullabies/soothing sounds and 10 audio books in the Baby Unit.

Lullaby / Soothing Sounds Playback

• Tap on M button then Scroll Left/Right to select option at the menu bar.
• Scroll Up or Down to select Music then confirm with O button.
• Press + UP button or – DOWN button to view the desired Lullaby/Soothing Sounds. The song names appear on the screen.
• Press O button to play the selection.

Audio Book (English only) Playback

• Tap on M button then Scroll Left/Right to select option at the menu bar.
• Scroll Up or Down to select then confirm with O button.
• Press + UP button or – DOWN button to view the desired Audio Book. The Press the book titles appear on the screen.

Stop Playback

• Tap on M button then Scroll Left/Right to select option at the menu bar.
• Scroll Up or Down to select or then confirm with O button.
• Press + UP button or – DOWN button until “Press OK to stop playing” appears on screen then confirm with O button to stop.
• Press M button to exit.

Alarm

1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until is highlighted.
3. Press the + UP button or – DOWN button to select the alarm time (6h, 4h, 2h). (The default setting is Alarm OFF.)
4. If an alarm time is selected, the Parent Unit will beep for about 45 seconds after every 6, 4 or 2 hour period.

Camera Control

Add (Pair) a Camera

1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until is highlighted, and the del/ add/ view/ scan menu will pop up.
3. Press the + UP button or – DOWN button to select add, and press the O button to confirm.
4. Camera 1 / 2 / 3 / 4 will pop up. Press the + UP button or – DOWN button to select the desired Camera, and press the O button to start searching for a camera unit.
   Note: If a camera is currently paired with the Parent Unit, its camera location (with a * against it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the underside of the Baby Unit until the Parent Unit finds the camera, beeps and PAIR OK appears on the screen. The video from the camera will then appear.

NOTE
A camera can only be registered to one Parent Unit at any one time.

View a Camera

1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until is highlighted, and the del/ add/ view/ scan menu will pop up.
3. Press the + UP button or – DOWN button to select add, and press the O button to confirm.
4. Camera 1 / 2 / 3 / 4 will pop up. Press the + UP button or – DOWN button to select the desired Camera, and press the O button to view the picture from that camera.

Delete a Camera

1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until icon is highlighted, and the del/ add/ view/ pop up.
3. Press the + UP button or – DOWN button to select del, and press the O button to confirm.

Wi-Fi® Internet Viewing

Minimum System Requirements

• Android System
  Version 5.0 or above
• iPhone®/iPad® iOS
  Version 9.0 or above
• High Speed (Wi-Fi®) Internet
  At least 0.6 Mbps upload bandwidth per camera (you can test your internet speed on this site: http://www.speedtest.net)

Getting Started – Connecting Devices

How does it work?

When a user tries to access the Camera, our Hubble server authenticates the user’s identity and permits access to the Camera.

Setup

Connect the Wi-Fi® Camera to the Power Adapter, then plug into mains power. The Camera must be within range of the Wi-Fi® router with which you want to connect. Make sure the password of the router is available for entering during the in-app setup process.

Status of LED Indication:

• Pair / Setup state: LED is Blue and Flashing.
• Unconnected state: LED is Red and Flashing.
• Connected state: LED is Blue and always on.
• Video streaming: LED is Blue and Flashing.

Note: You can only setup via a compatible smartphone or tablet and not via a PC.

User Account and Camera Setup on Compatible Devices What You Need

• Wi-Fi® Camera Unit
• Power adapter for the Camera
• Device with Android or iOS system

Power ON and Connect the Camera

• Switch the parent unit off before connect the camera to Wi-Fi®.
• Connect the power adapter to mains power and insert the plug into the power socket on the back of the Camera Unit, the unit turns on.

Download Hubble Connected App

• Scan the QR code with your smart device and download Hubble Connected App from the App Store for iOS devices or from the Google Play Store for Android devices.
• Install Hubble Connected App on your device.
  

Sign up with Hubble on Your Smart Device

• Ensure that your smart device is connected to your Wi-Fi® router.
  
• Run Hubble Connected App, tap Sign Up with Hubble, read through the Privacy Policy, Terms and Conditions, by signing up you agree to our terms of service before tap Done, enter your account information to sign up with Hubble.
  

Note:
If you already have a Hubble App account, please tap Log in with Hubble to go to the next steps.

Add the Camera to Your Account

• Log in your Hubble Account by entering “User Name” and “Password”.
  
• Tap on the screen of your device to add new Camera.
  
• To select your device for setting up by tapping Baby Monitoring.
  
• Tap EASE44CONNECT to add the new camera.
  
• The following setup instructions will appear on the screen, select your Wi-Fi network and enter “Password”.
  
• Power on your camera and wait for the Blue LED flashing on the camera.
  
• 
• 
• It will take a few minutes for the Camera to connect to the Wi-Fi® network before showing the connection status.
  
• The Camera has been successfully connected, name your Camera.
  

Camera Functions

Connecting the Camera Unit to Power

• Connect the power adapter to mains power and insert the plug into the power socket on the back of the Camera Unit.
• The Blue LED will illuminate after approximately 30 seconds if the camera is set up. The Red LED will flash if the camera is not set up. (Note: To switch off the device, unplug the power supply.)
• Run the Hubble for Motorola Monitors App on your smart device.

Overview of the Features on Hubble App

• Event History
  • Tap Event History to access the video record list that is triggered by Motion or Sound detection.
  • Delete Events Tap to delete selected event(s).
• Photo/Video
  • Take a photo or record a video from your Camera.
  • Tap the Video icon to activate Video function. Tap and hold the red button to start recording and release to stop.
  • Tap the Camera icon to switch to Camera mode. You can capture photos from Camera view.
    Note:
    Photos and videos will be stored in the internal flash memory of your smart de- vice, and can be accessed via the Gallery or Media Player (Android Device). To play videos, please use the Hubble App.
• Lullabies
  • Tap to access the Melody menu and select one of the 10 pre-set melodies you wish to play on your Camera Unit.
    Tap to access the Soothing sounds/Audio books or Personal recordings.
• Talkback
  • Tap to activate the function. Press the round button once to speak through the Camera Unit. Toggle the button again to listen to the audio feedback from the Camera Unit.
• Speaker
  • Tap to toggle speaker on or off.
• Setting
  • You can change the Camera settings by tapping on the Settings icon.
• Add Camera
  • Enter Add Camera procedures.

Working with PC/Notebook

• Go to http://www.hubbleconnected.com/motorola/login/
• Enter your User Name and Password and then click Login if you have already created an account.
• Click on the Camera list paired in your account via Android device or iPhone®/iPad® and the Camera view will appear on screen. You can easily stay connected with your favorite people, places and pets with live video streaming.
• On the website, you can change the Settings by following the Menu instructions.

Procedure for Resetting the Camera

Note: If your Camera is moved from one router (e.g. home) to another (e.g. office) or you have Camera setup issues, then the Camera must be reset. Please reset the Camera with the following procedures:

• Press and hold the PAIR button approximately 20 seconds, you will hear a long beep thence release PAIR button, wait for the Camera Unit to complete an internal reset procedure.The Red LED will begin to flash when the Camera Unit is reset successfully.
• You can add your Camera again by following the steps in section for Android devices or in section for iOS devices.

Disposal of the Device (Environment)

At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide and/or box indicates this.
Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment.
Please contact your local authorities in case you need more information on the collection points in your area.
The internal battery should be disposed of with the Parent unit in an environmentally-friendly manner according to your local regulations.

Cleaning

Clean the Baby Monitor with a slightly damp cloth or with an anti- static cloth. Never use cleaning agents or abrasive solvents.

Cleaning and Care

• Do not clean any part of the product with thinners or other solvents and chemicals – this may cause permanent damage to the product which is not covered by the warranty.
• Keep the Baby Monitor away from hot, humid areas or strong sunlight, and don’t let it get wet.
• Every effort has been made to ensure high standards of reliability for your Baby Monitor. However, if something does go wrong, please do not try to repair it yourself – contact Customer Service for assistance.

IMPORTANT
Always switch off and disconnect the power adapter before cleaning your baby monitor.

Help

Display

• Try recharging the battery pack.
• Reset the Units. Unplug both the Units’ electrical power, then plug them back in.
• Is the Unit switched on?
• Press and hold the ON/OFF button 0 on the Parent Unit for 3 seconds to switch it ON.
• Is the correct camera selected? Change the camera number, if necessary.
• Is the video display turned on? Press the VIDEO ON/OFF button V to turn it ON.
• When operating using batteries only, the display will go blank after 5 minutes or 30 minutes or 60 minutes to save power (depending on video settings). The Unit is still active and will give you audio alerts. You can reactivate the screen by pressing any button.

Registration

If the Baby Unit has lost its link with the Parent Unit

• If the Baby Unit is too far away it may be going out of range, so move the Baby Unit closer to the Parent Unit.
• Reset both the Parent Unit and Baby Unit by disconnecting them from the electrical power. Wait about 15 seconds before reconnecting. Allow up to one minute for the Baby Unit and the Parent Unit to synchronize.
• See Registration (Pairing), if there is a need to re-register the Units.

Interference

Noise interference on your Parent Unit

• Your Baby and Parent Units may be too close. Move them further apart.
• Make sure there is at least 1 to 2m between the 2 Units to avoid audio feedback.
• If the Baby Unit is too far away, it may be out of range. Move the Baby Unit closer to the Parent Unit.
• Make sure that the Baby and Parent Units are not near other electrical equipment, such as a television, computer or cordless/ mobile telephone. Move the Baby Unit or Parent Unit 1.5 meter away from other electrical equipment.
• Use of other 2.4 GHz products, such as wireless networks (Wi- Fi® routers), Bluetooth™ systems, or microwave ovens, may cause interference with this product. Keep the Baby Unit or Parent Unit at least 1.5 meter away from these types of products, or switch them off if they appear to be causing interference.
• If the signal is weak, try moving the Parent and/or Baby Unit to different positions in the rooms.

Noise Interference on Your Device

• To avoid background noise or echoes, ensure that there is enough distance between your device and the Wi-Fi® Camera Unit.
• Use of other 2.4 GHz products, such as Bluetooth™ systems or microwave ovens, may cause interference with this product. Keep the Wi-Fi® Camera Unit at least 1.5 metre away from these types of products, or switch them off if they appear to be causing interference.

Lost Connection

• Check your Wi-Fi® settings. If necessary, reconnect your Wi-Fi®. Ensure that the Wi-Fi® Camera Unit is switched ON. Wait a few minutes to make the connection with the Wi-Fi® system.

If you Forgot Your Password

• If you do not remember your password, tap Forgot Password and submit your e-mail address. A new password will be sent to your e-mail address immediately.

Troubleshooting for Wi-Fi® Internet Viewing

General Information

If your product is not working properly…

1. Read this User’s Guide or the Quick Start Guide.
2. Visit us at: motorolanursery.com/support

To order a replacement battery pack for parent Unit, contact customer service.

Consumer Products and Accessories Limited Warranty (“Warranty”)

Thank you for purchasing this Motorola branded product manufactured under license by Meizhou Guo Wei Electronics CO., Ltd. (“MZGW”)

What Does this Warranty Cover?
Subject to the exclusions contained below, MZGW warrants that this Motorola branded product (“Product”) or certified accessory (“Accessory”) sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below. This Warranty is your exclusive warranty and is not transferable.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY BY STATE, PROVINCE OR COUNTRY. FOR CONSUMERS WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. FOR A FULL UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR COUNTRY, PROVINCE OR STATE.

Who is covered?
This Warranty extends only to the first consumer purchaser, and is not transferable.

What will MZGW do?
MZGW or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned / refurbished / pre-owned or new Products, Accessories or parts.

What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR MZGW BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another.

Exclusions

Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and/or batteries that leak are covered by this Warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or MZGW, are excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, MZGW or its authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage.

How to Obtain Warranty Service or Other Information?
To obtain service or information, please contact us by visit:
motorolanursery.com/support

You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a MZGW Authorized Repair Center.
To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a Warranty card was included in your box, a completed Warranty card showing the serial number of the Product; (d) a written description of the problem; and, most importantly; (e) your address and telephone number.
These terms and conditions constitute the complete warranty agreement between you and MZGW regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by MZGW or representations made by any agent, employee or staff of MZGW, that may have been made in connection with the said purchase.

FCC and IC regulations

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISEDC Warning
This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:
The baby unit complies with FCC/ISEDC radiation exposure limits set forth for an uncontrolled environment. The baby unit should be installed and operated with minimum distance 20cm between the radiator& your body.
The parent unit has been tested and comply with FCC and ISEDC SAR limits.